[PATCH] ahci: fix status register check in ahci_softreset

ahci_softreset() used to use ahci_tf_read() which reads D2H_REG area
to check for the Status register.  However, this area is zeroed on
initialization and not set by initial signature FIS.  Replace it with
ahci_check_status().

This bug prevented CLO code from being activated whenever BSY and/or
DRQ is set prior to softreset.  This fix makes
AHCI_FLAG_RESET_NEEDS_CLO flag redundant.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 1 insertions, 2 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index cef2e70d64f8..988f8bbd14ff 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -736,8 +736,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
         }
 
         /* check BUSY/DRQ, perform Command List Override if necessary */
-        ahci_tf_read(ap, &tf);
-        if (tf.command & (ATA_BUSY | ATA_DRQ)) {
+        if (ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ)) {
                 rc = ahci_clo(ap);
 
                 if (rc == -EOPNOTSUPP) {