[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 175 insertions, 0 deletions

diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
new file mode 100644
index 000000000000..e3a85778cd4f
--- /dev/null
+++ b/drivers/ata/pata_netcell.c
@@ -0,0 +1,175 @@
+/*
+ *    pata_netcell.c - Netcell PATA driver
+ *
+ *      (c) 2006 Red Hat  <alan@redhat.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME        "pata_netcell"
+#define DRV_VERSION     "0.1.5"
+
+/**
+ *      netcell_probe_init      -       check for 40/80 pin
+ *      @ap: Port
+ *
+ *      Cables are handled by the RAID controller. Report 80 pin.
+ */
+ 
+static int netcell_pre_reset(struct ata_port *ap)
+{
+        ap->cbl = ATA_CBL_PATA80;
+        return ata_std_prereset(ap);
+}
+
+/**
+ *      netcell_probe_reset - Probe specified port on PATA host controller
+ *      @ap: Port to probe
+ *
+ *      LOCKING:
+ *      None (inherited from caller).
+ */
+
+static void netcell_error_handler(struct ata_port *ap)
+{
+        return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/* No PIO or DMA methods needed for this device */
+
+static struct scsi_host_template netcell_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .can_queue              = ATA_DEF_QUEUE,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = LIBATA_MAX_PRD,
+        /* Special handling needed if you have sector or LBA48 limits */
+        .max_sectors            = ATA_MAX_SECTORS,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = ATA_DMA_BOUNDARY,
+        .slave_configure        = ata_scsi_slave_config,
+        /* Use standard CHS mapping rules */
+        .bios_param             = ata_std_bios_param,
+};
+
+static const struct ata_port_operations netcell_ops = {
+        .port_disable           = ata_port_disable,
+
+        /* Task file is PCI ATA format, use helpers */
+        .tf_load                = ata_tf_load,
+        .tf_read                = ata_tf_read,
+        .check_status           = ata_check_status,
+        .exec_command           = ata_exec_command,
+        .dev_select             = ata_std_dev_select,
+
+        .freeze                 = ata_bmdma_freeze,
+        .thaw                   = ata_bmdma_thaw,
+        .error_handler          = netcell_error_handler,
+        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+
+        /* BMDMA handling is PCI ATA format, use helpers */
+        .bmdma_setup            = ata_bmdma_setup,
+        .bmdma_start            = ata_bmdma_start,
+        .bmdma_stop             = ata_bmdma_stop,
+        .bmdma_status           = ata_bmdma_status,
+        .qc_prep                = ata_qc_prep,
+        .qc_issue               = ata_qc_issue_prot,
+        .data_xfer              = ata_pio_data_xfer,
+
+        /* Timeout handling. Special recovery hooks here */
+        .eng_timeout            = ata_eng_timeout,
+        .irq_handler            = ata_interrupt,
+        .irq_clear              = ata_bmdma_irq_clear,
+
+        /* Generic PATA PCI ATA helpers */
+        .port_start             = ata_port_start,
+        .port_stop              = ata_port_stop,
+        .host_stop              = ata_host_stop,
+};
+
+
+/**
+ *      netcell_init_one - Register Netcell ATA PCI device with kernel services
+ *      @pdev: PCI device to register
+ *      @ent: Entry in netcell_pci_tbl matching with @pdev
+ *
+ *      Called from kernel PCI layer.
+ *
+ *      LOCKING:
+ *      Inherited from PCI layer (may sleep).
+ *
+ *      RETURNS:
+ *      Zero on success, or -ERRNO value.
+ */
+
+static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+        static int printed_version;
+        static struct ata_port_info info = {
+                .sht            = &netcell_sht,
+                .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                /* Actually we don't really care about these as the
+                   firmware deals with it */
+                .pio_mask       = 0x1f, /* pio0-4 */
+                .mwdma_mask     = 0x07, /* mwdma0-2 */
+                .udma_mask      = 0x3f, /* UDMA 133 */
+                .port_ops       = &netcell_ops,
+        };
+        static struct ata_port_info *port_info[2] = { &info, &info };
+
+        if (!printed_version++)
+                dev_printk(KERN_DEBUG, &pdev->dev,
+                           "version " DRV_VERSION "\n");
+
+        /* Any chip specific setup/optimisation/messages here */
+        ata_pci_clear_simplex(pdev);
+        
+        /* And let the library code do the work */
+        return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static const struct pci_device_id netcell_pci_tbl[] = {
+        { PCI_DEVICE(PCI_VENDOR_ID_NETCELL, PCI_DEVICE_ID_REVOLUTION), },
+        { }     /* terminate list */
+};
+
+static struct pci_driver netcell_pci_driver = {
+        .name                   = DRV_NAME,
+        .id_table               = netcell_pci_tbl,
+        .probe                  = netcell_init_one,
+        .remove                 = ata_pci_remove_one,
+};
+
+static int __init netcell_init(void)
+{
+        return pci_register_driver(&netcell_pci_driver);
+}
+
+static void __exit netcell_exit(void)
+{
+        pci_unregister_driver(&netcell_pci_driver);
+}
+
+module_init(netcell_init);
+module_exit(netcell_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, netcell_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+