MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platforms

__do_IRQ() is deprecated and will go away.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 files changed, 59 insertions, 41 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 206cb7953b0c..dc787190430a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -77,7 +77,6 @@ config MIPS_COBALT
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
         select SYS_SUPPORTS_LITTLE_ENDIAN
-        select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config MACH_DECSTATION
         bool "DECstations"
@@ -132,7 +131,6 @@ config MACH_JAZZ
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
         select SYS_SUPPORTS_100HZ
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         help
          This a family of machines based on the MIPS R4030 chipset which was
          used by several vendors to build RISC/os and Windows NT workstations.
@@ -154,7 +152,6 @@ config LASAT
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
         select SYS_SUPPORTS_LITTLE_ENDIAN
-        select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config LEMOTE_FULONG
         bool "Lemote Fulong mini-PC"
@@ -175,7 +172,6 @@ config LEMOTE_FULONG
         select SYS_SUPPORTS_LITTLE_ENDIAN
         select SYS_SUPPORTS_HIGHMEM
         select SYS_HAS_EARLY_PRINTK
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select GENERIC_ISA_DMA_SUPPORT_BROKEN
         select CPU_HAS_WB
         help
@@ -250,7 +246,6 @@ config MACH_VR41XX
         select CEVT_R4K
         select CSRC_R4K
         select SYS_HAS_CPU_VR41XX
-        select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config NXP_STB220
         bool "NXP STB220 board"
@@ -364,7 +359,6 @@ config SGI_IP27
         select SYS_SUPPORTS_BIG_ENDIAN
         select SYS_SUPPORTS_NUMA
         select SYS_SUPPORTS_SMP
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         help
           This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
           workstations.  To compile a Linux kernel that runs on these, say Y
@@ -563,7 +557,6 @@ config MIKROTIK_RB532
         select CEVT_R4K
         select CSRC_R4K
         select DMA_NONCOHERENT
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select HW_HAS_PCI
         select IRQ_CPU
         select SYS_HAS_CPU_MIPS32_R1
@@ -700,8 +693,7 @@ config SCHED_OMIT_FRAME_POINTER
         default y
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
-        bool
-        default n
+        def_bool y
 
 #
 # Select some configuration options automatically based on user selections.
@@ -920,7 +912,6 @@ config SOC_PNX833X
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_LITTLE_ENDIAN
         select SYS_SUPPORTS_BIG_ENDIAN
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select GENERIC_GPIO
         select CPU_MIPSR2_IRQ_VI
 
@@ -939,7 +930,6 @@ config SOC_PNX8550
         select SYS_HAS_CPU_MIPS32_R1
         select SYS_HAS_EARLY_PRINTK
         select SYS_SUPPORTS_32BIT_KERNEL
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select GENERIC_GPIO
 
 config SWAP_IO_SPACE
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 2fc5c13e890f..8128aebfb155 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -134,5 +134,4 @@ config SOC_AU1X00
         select SYS_HAS_CPU_MIPS32_R1
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_APM_EMULATION
-        select GENERIC_HARDIRQS_NO__DO_IRQ
         select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 963c16d266ab..6a8cd28133d5 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -140,14 +140,16 @@ void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqma
 
                 switch (imp->im_type) {
                 case MSC01_IRQ_EDGE:
-                        set_irq_chip(irqbase+n, &msc_edgeirq_type);
+                        set_irq_chip_and_handler_name(irqbase + n,
+                                &msc_edgeirq_type, handle_edge_irq, "edge");
                         if (cpu_has_veic)
                                 MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
                         else
                                 MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
                         break;
                 case MSC01_IRQ_LEVEL:
-                        set_irq_chip(irqbase+n, &msc_levelirq_type);
+                        set_irq_chip_and_handler_name(irqbase+n,
+                                &msc_levelirq_type, handle_level_irq, "level");
                         if (cpu_has_veic)
                                 MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
                         else
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 0ee2567b780d..55c8a3ca507b 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -112,7 +112,8 @@ void __init mips_cpu_irq_init(void)
          */
         if (cpu_has_mipsmt)
                 for (i = irq_base; i < irq_base + 2; i++)
-                        set_irq_chip(i, &mips_mt_cpu_irq_controller);
+                        set_irq_chip_and_handler(i, &mips_mt_cpu_irq_controller,
+                                                 handle_percpu_irq);
 
         for (i = irq_base + 2; i < irq_base + 8; i++)
                 set_irq_chip_and_handler(i, &mips_cpu_irq_controller,
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 0d6b6663d5f6..0aefc5319a03 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -325,16 +325,11 @@ static void mask_and_ack_maceisa_irq(unsigned int irq)
 {
         unsigned long mace_int;
 
-        switch (irq) {
-        case MACEISA_PARALLEL_IRQ:
-        case MACEISA_SERIAL1_TDMAPR_IRQ:
-        case MACEISA_SERIAL2_TDMAPR_IRQ:
-                /* edge triggered */
-                mace_int = mace->perif.ctrl.istat;
-                mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
-                mace->perif.ctrl.istat = mace_int;
-                break;
-        }
+        /* edge triggered */
+        mace_int = mace->perif.ctrl.istat;
+        mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
+        mace->perif.ctrl.istat = mace_int;
+
         disable_maceisa_irq(irq);
 }
 
@@ -344,7 +339,16 @@ static void end_maceisa_irq(unsigned irq)
                 enable_maceisa_irq(irq);
 }
 
-static struct irq_chip ip32_maceisa_interrupt = {
+static struct irq_chip ip32_maceisa_level_interrupt = {
+        .name           = "IP32 MACE ISA",
+        .ack            = disable_maceisa_irq,
+        .mask           = disable_maceisa_irq,
+        .mask_ack       = disable_maceisa_irq,
+        .unmask         = enable_maceisa_irq,
+        .end            = end_maceisa_irq,
+};
+
+static struct irq_chip ip32_maceisa_edge_interrupt = {
         .name           = "IP32 MACE ISA",
         .ack            = mask_and_ack_maceisa_irq,
         .mask           = disable_maceisa_irq,
@@ -500,27 +504,50 @@ void __init arch_init_irq(void)
         for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
                 switch (irq) {
                 case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
-                        set_irq_chip(irq, &ip32_mace_interrupt);
+                        set_irq_chip_and_handler_name(irq,&ip32_mace_interrupt,
+                                handle_level_irq, "level");
                         break;
+
                 case MACEPCI_SCSI0_IRQ ...  MACEPCI_SHARED2_IRQ:
-                        set_irq_chip(irq, &ip32_macepci_interrupt);
+                        set_irq_chip_and_handler_name(irq,
+                                &ip32_macepci_interrupt, handle_level_irq,
+                                "level");
                         break;
+
                 case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
-                        set_irq_chip(irq, &crime_edge_interrupt);
+                        set_irq_chip_and_handler_name(irq,
+                                &crime_edge_interrupt, handle_edge_irq, "edge");
                         break;
                 case CRIME_CPUERR_IRQ:
                 case CRIME_MEMERR_IRQ:
-                        set_irq_chip(irq, &crime_level_interrupt);
+                        set_irq_chip_and_handler_name(irq,
+                                &crime_level_interrupt, handle_level_irq,
+                                "level");
                         break;
+
                 case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
                 case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
-                        set_irq_chip(irq, &crime_edge_interrupt);
+                        set_irq_chip_and_handler_name(irq,
+                                &crime_edge_interrupt, handle_edge_irq, "edge");
                         break;
+
                 case CRIME_VICE_IRQ:
-                        set_irq_chip(irq, &crime_edge_interrupt);
+                        set_irq_chip_and_handler_name(irq,
+                                &crime_edge_interrupt, handle_edge_irq, "edge");
+                        break;
+
+                case MACEISA_PARALLEL_IRQ:
+                case MACEISA_SERIAL1_TDMAPR_IRQ:
+                case MACEISA_SERIAL2_TDMAPR_IRQ:
+                        set_irq_chip_and_handler_name(irq,
+                                &ip32_maceisa_edge_interrupt, handle_edge_irq,
+                                "edge");
                         break;
+
                 default:
-                        set_irq_chip(irq, &ip32_maceisa_interrupt);
+                        set_irq_chip_and_handler_name(irq,
+                                &ip32_maceisa_level_interrupt, handle_level_irq,
+                                "level");
                         break;
                 }
         }
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 12b465d404df..352352b3cb2f 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -236,7 +236,7 @@ void __init init_bcm1480_irqs(void)
         int i;
 
         for (i = 0; i < BCM1480_NR_IRQS; i++) {
-                set_irq_chip(i, &bcm1480_irq_type);
+                set_irq_chip_and_handler(i, &bcm1480_irq_type, handle_level_irq);
                 bcm1480_irq_owner[i] = 0;
         }
 }
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 808ac2959b8c..c08ff582da6f 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -220,7 +220,7 @@ void __init init_sb1250_irqs(void)
         int i;
 
         for (i = 0; i < SB1250_NR_IRQS; i++) {
-                set_irq_chip(i, &sb1250_irq_type);
+                set_irq_chip_and_handler(i, &sb1250_irq_type, handle_level_irq);
                 sb1250_irq_owner[i] = 0;
         }
 }
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index 3f8cf5eb2f06..7dd76fb3b645 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -219,7 +219,7 @@ void __init sni_a20r_irq_init(void)
         int i;
 
         for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
-                set_irq_chip(i, &a20r_irq_type);
+                set_irq_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
         sni_hwint = a20r_hwint;
         change_c0_status(ST0_IM, IE_IRQ0);
         setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 834650f371e0..74e6c67982fb 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -304,7 +304,7 @@ void __init sni_pcimt_irq_init(void)
         mips_cpu_irq_init();
         /* Actually we've got more interrupts to handle ...  */
         for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
-                set_irq_chip(i, &pcimt_irq_type);
+                set_irq_chip_and_handler(i, &pcimt_irq_type, handle_level_irq);
         sni_hwint = sni_pcimt_hwint;
         change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
 }
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index e5f12cf96e8e..071a9573ac7f 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -246,7 +246,7 @@ void __init sni_pcit_irq_init(void)
 
         mips_cpu_irq_init();
         for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
-                set_irq_chip(i, &pcit_irq_type);
+                set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
         *(volatile u32 *)SNI_PCIT_INT_REG = 0;
         sni_hwint = sni_pcit_hwint;
         change_c0_status(ST0_IM, IE_IRQ1);
@@ -259,7 +259,7 @@ void __init sni_pcit_cplus_irq_init(void)
 
         mips_cpu_irq_init();
         for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
-                set_irq_chip(i, &pcit_irq_type);
+                set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
         *(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
         sni_hwint = sni_pcit_hwint_cplus;
         change_c0_status(ST0_IM, IE_IRQ0);
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index 5310aa75afa4..b4352a0c8151 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -487,7 +487,7 @@ void __init sni_rm200_irq_init(void)
         mips_cpu_irq_init();
         /* Actually we've got more interrupts to handle ...  */
         for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
-                set_irq_chip(i, &rm200_irq_type);
+                set_irq_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
         sni_hwint = sni_rm200_hwint;
         change_c0_status(ST0_IM, IE_IRQ0);
         setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq);
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 226e8bb2f0a1..0db7cf38ed8b 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -20,7 +20,6 @@ config MACH_TXX9
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_LITTLE_ENDIAN
         select SYS_SUPPORTS_BIG_ENDIAN
-        select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config TOSHIBA_JMR3927
         bool "Toshiba JMR-TX3927 board"