[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform

Add support for Freescale mpc7448 (Taiga) board support

Signed-off-by: Roy Zang  <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

7 files changed, 397 insertions, 3 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index baec4e3ff832..0b5e225c2d51 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -336,7 +336,7 @@ config PPC_ISERIES
 
 config EMBEDDED6xx
         bool "Embedded 6xx/7xx/7xxx-based board"
-        depends on PPC32 && BROKEN
+        depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
 
 config APUS
         bool "Amiga-APUS"
@@ -436,7 +436,8 @@ config U3_DART
         default n
 
 config MPIC
-        depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP
+        depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \
+                               || MPC7448HPC2
         bool
         default y
 
@@ -821,7 +822,8 @@ config MCA
         bool
 
 config PCI
-        bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
+        bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
+                                  || MPC7448HPC2
         default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
         default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
         default PCI_QSPAN if !4xx && !CPM2 && 8xx
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 6e67b5b49ba1..3a9b78d03542 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -302,6 +302,17 @@ void __init find_legacy_serial_ports(void)
                 of_node_put(isa);
         }
 
+        /* First fill our array with tsi-bridge ports */
+        for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) {
+                struct device_node *tsi = of_get_parent(np);
+                if (tsi && !strcmp(tsi->type, "tsi-bridge")) {
+                        index = add_legacy_soc_port(np, np);
+                        if (index >= 0 && np == stdout)
+                                legacy_serial_console = index;
+                }
+                of_node_put(tsi);
+        }
+
 #ifdef CONFIG_PCI
         /* Next, try to locate PCI ports */
         for (np = NULL; (np = of_find_all_nodes(np));) {
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 292863694562..5cf46dc57895 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_PPC_PSERIES)	+= pseries/
 obj-$(CONFIG_PPC_ISERIES)       += iseries/
 obj-$(CONFIG_PPC_MAPLE)         += maple/
 obj-$(CONFIG_PPC_CELL)          += cell/
+obj-$(CONFIG_EMBEDDED6xx)       += embedded6xx/
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 4fdbc9ae876b..ba07a9a7c039 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -74,6 +74,16 @@ config SANDPOINT
           Select SANDPOINT if configuring for a Motorola Sandpoint X3
           (any flavor).
 
+config MPC7448HPC2
+        bool "Freescale MPC7448HPC2(Taiga)"
+        select TSI108_BRIDGE
+        select DEFAULT_UIMAGE
+        select PPC_UDBG_16550
+        select MPIC
+        help
+          Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
+          platform
+
 config RADSTONE_PPC7D
         bool "Radstone Technology PPC7D board"
         select PPC_I8259
@@ -221,6 +231,11 @@ config MV64X60
         select PPC_INDIRECT_PCI
         default y
 
+config TSI108_BRIDGE
+        bool
+        depends on MPC7448HPC2
+        default y
+
 menu "Set bridge options"
         depends on MV64X60
 
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
new file mode 100644
index 000000000000..fa499fe59291
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for the 6xx/7xx/7xxxx linux kernel.
+#
+obj-$(CONFIG_MPC7448HPC2)       += mpc7448_hpc2.o
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
new file mode 100644
index 000000000000..d7a4fc7ca238
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -0,0 +1,335 @@
+/*
+ * mpc7448_hpc2.c
+ *
+ * Board setup routines for the Freescale Taiga platform
+ *
+ * Author: Jacob Pan
+ *       jacob.pan@freescale.com
+ * Author: Xianghua Xiao
+ *       x.xiao@freescale.com
+ * Maintainer: Roy Zang <tie-fei.zang@freescale.com>
+ *      Add Flat Device Tree support fot mpc7448hpc2 board
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/ide.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/tsi108.h>
+#include <asm/pci-bridge.h>
+#include <asm/reg.h>
+#include <mm/mmu_decl.h>
+#include "mpc7448_hpc2.h"
+#include <asm/tsi108_irq.h>
+#include <asm/mpic.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+#ifndef CONFIG_PCI
+isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
+isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
+pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
+#endif
+
+extern int tsi108_setup_pci(struct device_node *dev);
+extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+extern void tsi108_pci_int_init(void);
+extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
+
+/*
+ * Define all of the IRQ senses and polarities.  Taken from the
+ * mpc7448hpc  manual.
+ * Note:  Likely, this table and the following function should be
+ *        obtained and derived from the OF Device Tree.
+ */
+
+static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
+        /* External on-board sources */
+        (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* INT[0] XINT0 from FPGA */
+        (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* INT[1] XINT1 from FPGA */
+        (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* INT[2] PHY_INT from both GIGE */
+        (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* INT[3] RESERVED */
+        /* Internal Tsi108/109 interrupt sources */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* Reserved IRQ */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* Reserved IRQ */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* Reserved IRQ */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* Reserved IRQ */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* DMA0 */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* DMA1 */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* DMA2 */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* DMA3 */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* UART0 */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* UART1 */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* I2C */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* GPIO */
+        (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),      /* GIGE0 */
+        (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),      /* GIGE1 */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* Reserved IRQ */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* HLP */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* SDC */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* Processor IF */
+        (IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),      /* Reserved IRQ */
+        (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),      /* PCI/X block */
+};
+
+int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
+{
+        if (bus == 0 && PCI_SLOT(devfn) == 0)
+                return PCIBIOS_DEVICE_NOT_FOUND;
+        else
+                return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * find pci slot by devfn in interrupt map of OF tree
+ */
+u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn)
+{
+        int i;
+        unsigned int tmp;
+        for (i = 0; i < 4; i++){
+                tmp = interrupt_map[i*4*7];
+                if ((tmp >> 11) == (devfn >> 3))
+                        return i;
+        }
+        return i;
+}
+
+/*
+ * Scans the interrupt map for pci device
+ */
+void mpc7448_hpc2_fixup_irq(struct pci_dev *dev)
+{
+        struct pci_controller *hose;
+        struct device_node *node;
+        unsigned int *interrupt;
+        int busnr;
+        int len;
+        u8 slot;
+        u8 pin;
+
+        /* Lookup the hose */
+        busnr = dev->bus->number;
+        hose = pci_bus_to_hose(busnr);
+        if (!hose)
+                printk(KERN_ERR "No pci hose found\n");
+
+        /* Check it has an OF node associated */
+        node = (struct device_node *) hose->arch_data;
+        if (!node)
+                printk(KERN_ERR "No pci node found\n");
+
+        interrupt = (unsigned int *) get_property(node, "interrupt-map", &len);
+        slot = find_slot_by_devfn(interrupt, dev->devfn);
+        pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+        if (pin == 0 || pin > 4)
+                pin = 1;
+        pin--;
+        dev->irq  = interrupt[slot*4*7 + pin*7 + 5];
+        DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq);
+}
+/* temporary pci irq map fixup*/
+
+void __init mpc7448_hpc2_pcibios_fixup(void)
+{
+        struct pci_dev *dev = NULL;
+        for_each_pci_dev(dev) {
+                mpc7448_hpc2_fixup_irq(dev);
+                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+        }
+}
+
+static void __init mpc7448_hpc2_setup_arch(void)
+{
+        struct device_node *cpu;
+        struct device_node *np;
+        if (ppc_md.progress)
+                ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
+
+        cpu = of_find_node_by_type(NULL, "cpu");
+        if (cpu != 0) {
+                unsigned int *fp;
+
+                fp = (int *)get_property(cpu, "clock-frequency", NULL);
+                if (fp != 0)
+                        loops_per_jiffy = *fp / HZ;
+                else
+                        loops_per_jiffy = 50000000 / HZ;
+                of_node_put(cpu);
+        }
+        tsi108_csr_vir_base = get_vir_csrbase();
+
+#ifdef  CONFIG_ROOT_NFS
+        ROOT_DEV = Root_NFS;
+#else
+        ROOT_DEV = Root_HDA1;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+        ROOT_DEV = Root_RAM0;
+#endif
+
+        /* setup PCI host bridge */
+#ifdef CONFIG_PCI
+        for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+                tsi108_setup_pci(np);
+
+        ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
+        if (ppc_md.progress)
+                ppc_md.progress("tsi108: resources set", 0x100);
+#endif
+
+        printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");
+        printk(KERN_INFO
+               "Jointly ported by Freescale and Tundra Semiconductor\n");
+        printk(KERN_INFO
+               "Enabling L2 cache then enabling the HID0 prefetch engine.\n");
+}
+
+/*
+ * Interrupt setup and service.  Interrrupts on the mpc7448_hpc2 come
+ * from the four external INT pins, PCI interrupts are routed via
+ * PCI interrupt control registers, it generates internal IRQ23
+ *
+ * Interrupt routing on the Taiga Board:
+ * TSI108:PB_INT[0] -> CPU0:INT#
+ * TSI108:PB_INT[1] -> CPU0:MCP#
+ * TSI108:PB_INT[2] -> N/C
+ * TSI108:PB_INT[3] -> N/C
+ */
+static void __init mpc7448_hpc2_init_IRQ(void)
+{
+        struct mpic *mpic;
+        phys_addr_t mpic_paddr = 0;
+        struct device_node *tsi_pic;
+
+        tsi_pic = of_find_node_by_type(NULL, "open-pic");
+        if (tsi_pic) {
+                unsigned int size;
+                void *prop = get_property(tsi_pic, "reg", &size);
+                mpic_paddr = of_translate_address(tsi_pic, prop);
+        }
+
+        if (mpic_paddr == 0) {
+                printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+                return;
+        }
+
+        DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
+            (u32) mpic_paddr);
+
+        mpic = mpic_alloc(mpic_paddr,
+                        MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+                        MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
+                        0, /* num_sources used */
+                        TSI108_IRQ_BASE,
+                        0, /* num_sources used */
+                        NR_IRQS - 4 /* XXXX */,
+                        mpc7448_hpc2_pic_initsenses,
+                        sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+
+        BUG_ON(mpic == NULL); /* XXXX */
+
+        mpic_init(mpic);
+        mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+        tsi108_pci_int_init();
+
+        /* Configure MPIC outputs to CPU0 */
+        tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+}
+
+void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
+{
+        seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
+        seq_printf(m, "machine\t\t: MPC7448hpc2\n");
+}
+
+void mpc7448_hpc2_restart(char *cmd)
+{
+        local_irq_disable();
+
+        /* Set exception prefix high - to the firmware */
+        _nmask_and_or_msr(0, MSR_IP);
+
+        for (;;) ;              /* Spin until reset happens */
+}
+
+void mpc7448_hpc2_power_off(void)
+{
+        local_irq_disable();
+        for (;;) ;              /* No way to shut power off with software */
+}
+
+void mpc7448_hpc2_halt(void)
+{
+        mpc7448_hpc2_power_off();
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc7448_hpc2_probe(void)
+{
+        unsigned long root = of_get_flat_dt_root();
+
+        if (!of_flat_dt_is_compatible(root, "mpc74xx"))
+                return 0;
+        return 1;
+}
+
+static int mpc7448_machine_check_exception(struct pt_regs *regs)
+{
+        extern void tsi108_clear_pci_cfg_error(void);
+        const struct exception_table_entry *entry;
+
+        /* Are we prepared to handle this fault */
+        if ((entry = search_exception_tables(regs->nip)) != NULL) {
+                tsi108_clear_pci_cfg_error();
+                regs->msr |= MSR_RI;
+                regs->nip = entry->fixup;
+                return 1;
+        }
+        return 0;
+
+}
+define_machine(mpc7448_hpc2){
+        .name                   = "MPC7448 HPC2",
+        .probe                  = mpc7448_hpc2_probe,
+        .setup_arch             = mpc7448_hpc2_setup_arch,
+        .init_IRQ               = mpc7448_hpc2_init_IRQ,
+        .show_cpuinfo           = mpc7448_hpc2_show_cpuinfo,
+        .get_irq                = mpic_get_irq,
+        .pcibios_fixup          = mpc7448_hpc2_pcibios_fixup,
+        .restart                = mpc7448_hpc2_restart,
+        .calibrate_decr         = generic_calibrate_decr,
+        .machine_check_exception= mpc7448_machine_check_exception,
+        .progress               = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h
new file mode 100644
index 000000000000..a543a5242e34
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h
@@ -0,0 +1,26 @@
+/*
+ * mpc7448_hpc2.h
+ *
+ * Definitions for Freescale MPC7448_HPC2 platform
+ *
+ * Author: Jacob Pan
+ *         jacob.pan@freescale.com
+ * Maintainer: Roy Zang <roy.zang@freescale.com>
+ *
+ * 2006 (c) Freescale Semiconductor, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H
+#define __PPC_PLATFORMS_MPC7448_HPC2_H
+
+#include <asm/ppcboot.h>
+
+/* Base Addresses for the PCI bus
+ */
+#define MPC7448_HPC2_PCI_MEM_OFFSET     (0x00000000)
+#define MPC7448_HPC2_ISA_IO_BASE        (0x00000000)
+#define MPC7448_HPC2_ISA_MEM_BASE       (0x00000000)
+#endif                          /* __PPC_PLATFORMS_MPC7448_HPC2_H */