ARM: hw_breakpoint: use CRn as argument for debug reg accessor macros

The coprocessor register CRn for accesses to the debug register can be a
different one than C0. Take this into account for the ARM_DBG_READ and
the ARM_DBG_WRITE macro.

The inline assembler calls which used a coprocessor register CRn other
than C0 are replaced by the ARM_DBG_READ or ARM_DBG_WRITE macro.

Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

2 files changed, 24 insertions, 24 deletions

diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index c190bc992f0e..01169dd723f1 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -98,12 +98,12 @@ static inline void decode_ctrl_reg(u32 reg,
 #define ARM_BASE_WCR            112
 
 /* Accessor macros for the debug registers. */
-#define ARM_DBG_READ(M, OP2, VAL) do {\
-        asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\
+#define ARM_DBG_READ(N, M, OP2, VAL) do {\
+        asm volatile("mrc p14, 0, %0, " #N "," #M ", " #OP2 : "=r" (VAL));\
 } while (0)
 
-#define ARM_DBG_WRITE(M, OP2, VAL) do {\
-        asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\
+#define ARM_DBG_WRITE(N, M, OP2, VAL) do {\
+        asm volatile("mcr p14, 0, %0, " #N "," #M ", " #OP2 : : "r" (VAL));\
 } while (0)
 
 struct notifier_block;
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 8e9532152bd9..05febbaecb44 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -52,14 +52,14 @@ static u8 debug_arch;
 /* Maximum supported watchpoint length. */
 static u8 max_watchpoint_len;
 
-#define READ_WB_REG_CASE(OP2, M, VAL)           \
-        case ((OP2 << 4) + M):                  \
-                ARM_DBG_READ(c ## M, OP2, VAL); \
+#define READ_WB_REG_CASE(OP2, M, VAL)                   \
+        case ((OP2 << 4) + M):                          \
+                ARM_DBG_READ(c0, c ## M, OP2, VAL);     \
                 break
 
-#define WRITE_WB_REG_CASE(OP2, M, VAL)          \
-        case ((OP2 << 4) + M):                  \
-                ARM_DBG_WRITE(c ## M, OP2, VAL);\
+#define WRITE_WB_REG_CASE(OP2, M, VAL)                  \
+        case ((OP2 << 4) + M):                          \
+                ARM_DBG_WRITE(c0, c ## M, OP2, VAL);    \
                 break
 
 #define GEN_READ_WB_REG_CASES(OP2, VAL)         \
@@ -141,7 +141,7 @@ static u8 get_debug_arch(void)
                 return ARM_DEBUG_ARCH_V6;
         }
 
-        ARM_DBG_READ(c0, 0, didr);
+        ARM_DBG_READ(c0, c0, 0, didr);
         return (didr >> 16) & 0xf;
 }
 
@@ -169,7 +169,7 @@ static int debug_exception_updates_fsr(void)
 static int get_num_wrp_resources(void)
 {
         u32 didr;
-        ARM_DBG_READ(c0, 0, didr);
+        ARM_DBG_READ(c0, c0, 0, didr);
         return ((didr >> 28) & 0xf) + 1;
 }
 
@@ -177,7 +177,7 @@ static int get_num_wrp_resources(void)
 static int get_num_brp_resources(void)
 {
         u32 didr;
-        ARM_DBG_READ(c0, 0, didr);
+        ARM_DBG_READ(c0, c0, 0, didr);
         return ((didr >> 24) & 0xf) + 1;
 }
 
@@ -231,14 +231,14 @@ static int get_num_brps(void)
 static int monitor_mode_enabled(void)
 {
         u32 dscr;
-        ARM_DBG_READ(c1, 0, dscr);
+        ARM_DBG_READ(c0, c1, 0, dscr);
         return !!(dscr & ARM_DSCR_MDBGEN);
 }
 
 static int enable_monitor_mode(void)
 {
         u32 dscr;
-        ARM_DBG_READ(c1, 0, dscr);
+        ARM_DBG_READ(c0, c1, 0, dscr);
 
         /* If monitor mode is already enabled, just return. */
         if (dscr & ARM_DSCR_MDBGEN)
@@ -248,11 +248,11 @@ static int enable_monitor_mode(void)
         switch (get_debug_arch()) {
         case ARM_DEBUG_ARCH_V6:
         case ARM_DEBUG_ARCH_V6_1:
-                ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
+                ARM_DBG_WRITE(c0, c1, 0, (dscr | ARM_DSCR_MDBGEN));
                 break;
         case ARM_DEBUG_ARCH_V7_ECP14:
         case ARM_DEBUG_ARCH_V7_1:
-                ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
+                ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN));
                 isb();
                 break;
         default:
@@ -260,7 +260,7 @@ static int enable_monitor_mode(void)
         }
 
         /* Check that the write made it through. */
-        ARM_DBG_READ(c1, 0, dscr);
+        ARM_DBG_READ(c0, c1, 0, dscr);
         if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN),
                 "Failed to enable monitor mode on CPU %d.\n",
                 smp_processor_id()))
@@ -853,7 +853,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
                 local_irq_enable();
 
         /* We only handle watchpoints and hardware breakpoints. */
-        ARM_DBG_READ(c1, 0, dscr);
+        ARM_DBG_READ(c0, c1, 0, dscr);
 
         /* Perform perf callbacks. */
         switch (ARM_DSCR_MOE(dscr)) {
@@ -921,14 +921,14 @@ static void reset_ctrl_regs(void *unused)
                  * Ensure sticky power-down is clear (i.e. debug logic is
                  * powered up).
                  */
-                asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (val));
+                ARM_DBG_READ(c1, c5, 4, val);
                 if ((val & 0x1) == 0)
                         err = -EPERM;
 
                 /*
                  * Check whether we implement OS save and restore.
                  */
-                asm volatile("mrc p14, 0, %0, c1, c1, 4" : "=r" (val));
+                ARM_DBG_READ(c1, c1, 4, val);
                 if ((val & 0x9) == 0)
                         goto clear_vcr;
                 break;
@@ -936,7 +936,7 @@ static void reset_ctrl_regs(void *unused)
                 /*
                  * Ensure the OS double lock is clear.
                  */
-                asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (val));
+                ARM_DBG_READ(c1, c3, 4, val);
                 if ((val & 0x1) == 1)
                         err = -EPERM;
                 break;
@@ -952,7 +952,7 @@ static void reset_ctrl_regs(void *unused)
          * Unconditionally clear the OS lock by writing a value
          * other than 0xC5ACCE55 to the access register.
          */
-        asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+        ARM_DBG_WRITE(c1, c0, 4, 0);
         isb();
 
         /*
@@ -960,7 +960,7 @@ static void reset_ctrl_regs(void *unused)
          * enabling monitor mode.
          */
 clear_vcr:
-        asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+        ARM_DBG_WRITE(c0, c7, 0, 0);
         isb();
 
         if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {