[Blackfin] arch: Add platform support for MTD DATAFLASH

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

1 files changed, 20 insertions, 1 deletions

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index e95478252c87..d4cbcb8774e7 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -503,6 +503,15 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_MTD_DATAFLASH) \
+        || defined(CONFIG_MTD_DATAFLASH_MODULE)
+/* DataFlash chip */
+static struct bfin5xx_spi_chip data_flash_chip_info = {
+        .enable_dma = 0,         /* use dma transfer with this chip*/
+        .bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
         || defined(CONFIG_MTD_M25P80_MODULE)
@@ -517,7 +526,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .mode = SPI_MODE_3,
         },
 #endif
-
+#if defined(CONFIG_MTD_DATAFLASH) \
+        || defined(CONFIG_MTD_DATAFLASH_MODULE)
+        {       /* DataFlash chip */
+                .modalias = "mtd_dataflash",
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+                .controller_data = &data_flash_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
 #if defined(CONFIG_SPI_ADC_BF533) \
         || defined(CONFIG_SPI_ADC_BF533_MODULE)
         {