[POWERPC] 52xx: Remove support for PCI bus_offset

The hose->bus_offset is only used for PCI config cycles and the 52xx PCI
config code doesn't actually ever set bus_offset to a non-zero value.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 4 insertions, 5 deletions

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 51164c851cac..57ca2feb0799 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -117,13 +117,13 @@ mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 
         out_be32(hose->cfg_addr,
                 (1 << 31) |
-                ((bus->number - hose->bus_offset) << 16) |
+                (bus->number << 16) |
                 (devfn << 8) |
                 (offset & 0xfc));
         mb();
 
 #if defined(CONFIG_PPC_MPC5200_BUGFIX)
-        if (bus->number != hose->bus_offset) {
+        if (bus->number) {
                 /* workaround for the bug 435 of the MPC5200 (L25R);
                  * Don't do 32 bits config access during type-1 cycles */
                 switch (len) {
@@ -174,13 +174,13 @@ mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 
         out_be32(hose->cfg_addr,
                 (1 << 31) |
-                ((bus->number - hose->bus_offset) << 16) |
+                (bus->number << 16) |
                 (devfn << 8) |
                 (offset & 0xfc));
         mb();
 
 #if defined(CONFIG_PPC_MPC5200_BUGFIX)
-        if (bus->number != hose->bus_offset) {
+        if (bus->number) {
                 /* workaround for the bug 435 of the MPC5200 (L25R);
                  * Don't do 32 bits config access during type-1 cycles */
                 switch (len) {
@@ -394,7 +394,6 @@ mpc52xx_add_bridge(struct device_node *node)
         hose->first_busno = bus_range ? bus_range[0] : 0;
         hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-        hose->bus_offset = 0;
         hose->ops = &mpc52xx_pci_ops;
 
         pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);