Merge branch 'linus' into oprofile

Conflicts:
	arch/x86/kernel/apic_32.c
	include/linux/pci_ids.h

1 files changed, 253 insertions, 242 deletions

diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 94e02de960ea..f10317179ee6 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -20,6 +20,8 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
@@ -35,59 +37,27 @@
 #include <asm/smp.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/sbus.h>
 #include <asm/cacheflush.h>
 
 #include "irq.h"
 
-/* On the sun4m, just like the timers, we have both per-cpu and master
- * interrupt registers.
- */
-
-/* These registers are used for sending/receiving irqs from/to
- * different cpu's.
- */
-struct sun4m_intreg_percpu {
-        unsigned int tbt;        /* Interrupts still pending for this cpu. */
-
-        /* These next two registers are WRITE-ONLY and are only
-         * "on bit" sensitive, "off bits" written have NO affect.
-         */
-        unsigned int clear;  /* Clear this cpus irqs here. */
-        unsigned int set;    /* Set this cpus irqs here. */
-        unsigned char space[PAGE_SIZE - 12];
+struct sun4m_irq_percpu {
+        u32             pending;
+        u32             clear;
+        u32             set;
 };
 
-/*
- * djhr
- * Actually the clear and set fields in this struct are misleading..
- * according to the SLAVIO manual (and the same applies for the SEC)
- * the clear field clears bits in the mask which will ENABLE that IRQ
- * the set field sets bits in the mask to DISABLE the IRQ.
- *
- * Also the undirected_xx address in the SLAVIO is defined as
- * RESERVED and write only..
- *
- * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
- *             sun4m machines, for MP the layout makes more sense.
- */
-struct sun4m_intregs {
-        struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
-        unsigned int tbt;                /* IRQ's that are still pending. */
-        unsigned int irqs;               /* Master IRQ bits. */
-
-        /* Again, like the above, two these registers are WRITE-ONLY. */
-        unsigned int clear;              /* Clear master IRQ's by setting bits here. */
-        unsigned int set;                /* Set master IRQ's by setting bits here. */
-
-        /* This register is both READ and WRITE. */
-        unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
+struct sun4m_irq_global {
+        u32             pending;
+        u32             mask;
+        u32             mask_clear;
+        u32             mask_set;
+        u32             interrupt_target;
 };
 
-static unsigned long dummy;
-
-struct sun4m_intregs *sun4m_interrupts;
-unsigned long *irq_rcvreg = &dummy;
+/* Code in entry.S needs to get at these register mappings.  */
+struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
+struct sun4m_irq_global __iomem *sun4m_irq_global;
 
 /* Dave Redman (djhr@tadpole.co.uk)
  * The sun4m interrupt registers.
@@ -101,8 +71,9 @@ unsigned long *irq_rcvreg = &dummy;
 
 #define SUN4M_INT_MASKALL       0x80000000        /* mask all interrupts */
 #define SUN4M_INT_MODULE_ERR    0x40000000        /* module error */
-#define SUN4M_INT_M2S_WRITE     0x20000000        /* write buffer error */
-#define SUN4M_INT_ECC           0x10000000        /* ecc memory error */
+#define SUN4M_INT_M2S_WRITE_ERR 0x20000000        /* write buffer error */
+#define SUN4M_INT_ECC_ERR       0x10000000        /* ecc memory error */
+#define SUN4M_INT_VME_ERR       0x08000000        /* vme async error */
 #define SUN4M_INT_FLOPPY        0x00400000        /* floppy disk */
 #define SUN4M_INT_MODULE        0x00200000        /* module interrupt */
 #define SUN4M_INT_VIDEO         0x00100000        /* onboard video */
@@ -113,75 +84,126 @@ unsigned long *irq_rcvreg = &dummy;
 #define SUN4M_INT_SERIAL        0x00008000        /* serial ports */
 #define SUN4M_INT_KBDMS         0x00004000        /* keyboard/mouse */
 #define SUN4M_INT_SBUSBITS      0x00003F80        /* sbus int bits */
+#define SUN4M_INT_VMEBITS       0x0000007F        /* vme int bits */
+
+#define SUN4M_INT_ERROR         (SUN4M_INT_MODULE_ERR |    \
+                                 SUN4M_INT_M2S_WRITE_ERR | \
+                                 SUN4M_INT_ECC_ERR |       \
+                                 SUN4M_INT_VME_ERR)
 
 #define SUN4M_INT_SBUS(x)       (1 << (x+7))
 #define SUN4M_INT_VME(x)        (1 << (x))
 
-/* These tables only apply for interrupts greater than 15..
- * 
- * any intr value below 0x10 is considered to be a soft-int
- * this may be useful or it may not.. but that's how I've done it.
- * and it won't clash with what OBP is telling us about devices.
+/* Interrupt levels used by OBP */
+#define OBP_INT_LEVEL_SOFT      0x10
+#define OBP_INT_LEVEL_ONBOARD   0x20
+#define OBP_INT_LEVEL_SBUS      0x30
+#define OBP_INT_LEVEL_VME       0x40
+
+/* Interrupt level assignment on sun4m:
+ *
+ *      level           source
+ * ------------------------------------------------------------
+ *        1             softint-1
+ *        2             softint-2, VME/SBUS level 1
+ *        3             softint-3, VME/SBUS level 2
+ *        4             softint-4, onboard SCSI
+ *        5             softint-5, VME/SBUS level 3
+ *        6             softint-6, onboard ETHERNET
+ *        7             softint-7, VME/SBUS level 4
+ *        8             softint-8, onboard VIDEO
+ *        9             softint-9, VME/SBUS level 5, Module Interrupt
+ *       10             softint-10, system counter/timer
+ *       11             softint-11, VME/SBUS level 6, Floppy
+ *       12             softint-12, Keyboard/Mouse, Serial
+ *       13             softint-13, VME/SBUS level 7, ISDN Audio
+ *       14             softint-14, per-processor counter/timer
+ *       15             softint-15, Asynchronous Errors (broadcast)
  *
- * take an encoded intr value and lookup if it's valid
- * then get the mask bits that match from irq_mask
+ * Each interrupt source is masked distinctly in the sun4m interrupt
+ * registers.  The PIL level alone is therefore ambiguous, since multiple
+ * interrupt sources map to a single PIL.
  *
- * P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee.
+ * This ambiguity is resolved in the 'intr' property for device nodes
+ * in the OF device tree.  Each 'intr' property entry is composed of
+ * two 32-bit words.  The first word is the IRQ priority value, which
+ * is what we're intersted in.  The second word is the IRQ vector, which
+ * is unused.
+ *
+ * The low 4 bits of the IRQ priority indicate the PIL, and the upper
+ * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled.  0x20
+ * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
+ *
+ * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
+ * whereas a value of 0x33 is SBUS level 2.  Here are some sample
+ * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
+ * Tadpole S3 GX systems.
+ *
+ * esp:         0x24    onboard ESP SCSI
+ * le:          0x26    onboard Lance ETHERNET
+ * p9100:       0x32    SBUS level 1 P9100 video
+ * bpp:         0x33    SBUS level 2 BPP parallel port device
+ * DBRI:        0x39    SBUS level 5 DBRI ISDN audio
+ * SUNW,leo:    0x39    SBUS level 5 LEO video
+ * pcmcia:      0x3b    SBUS level 6 PCMCIA controller
+ * uctrl:       0x3b    SBUS level 6 UCTRL device
+ * modem:       0x3d    SBUS level 7 MODEM
+ * zs:          0x2c    onboard keyboard/mouse/serial
+ * floppy:      0x2b    onboard Floppy
+ * power:       0x22    onboard power device (XXX unknown mask bit XXX)
  */
-static unsigned char irq_xlate[32] = {
-    /*  0,  1,  2,  3,  4,  5,  6,  7,  8,  9,  a,  b,  c,  d,  e,  f */
-        0,  0,  0,  0,  1,  0,  2,  0,  3,  0,  4,  5,  6, 14,  0,  7,
-        0,  0,  8,  9,  0, 10,  0, 11,  0, 12,  0, 13,  0, 14,  0,  0
-};
 
-static unsigned long irq_mask[] = {
-        0,                                                /* illegal index */
-        SUN4M_INT_SCSI,                                   /*  1 irq 4 */
-        SUN4M_INT_ETHERNET,                               /*  2 irq 6 */
-        SUN4M_INT_VIDEO,                                  /*  3 irq 8 */
-        SUN4M_INT_REALTIME,                               /*  4 irq 10 */
-        SUN4M_INT_FLOPPY,                                 /*  5 irq 11 */
-        (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),             /*  6 irq 12 */
-        SUN4M_INT_MODULE_ERR,                             /*  7 irq 15 */
-        SUN4M_INT_SBUS(0),                                /*  8 irq 2 */
-        SUN4M_INT_SBUS(1),                                /*  9 irq 3 */
-        SUN4M_INT_SBUS(2),                                /* 10 irq 5 */
-        SUN4M_INT_SBUS(3),                                /* 11 irq 7 */
-        SUN4M_INT_SBUS(4),                                /* 12 irq 9 */
-        SUN4M_INT_SBUS(5),                                /* 13 irq 11 */
-        SUN4M_INT_SBUS(6)                                 /* 14 irq 13 */
+static unsigned long irq_mask[0x50] = {
+        /* SMP */
+        0,  SUN4M_SOFT_INT(1),
+        SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+        SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+        SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+        SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+        SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+        SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+        SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+        /* soft */
+        0,  SUN4M_SOFT_INT(1),
+        SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+        SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+        SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+        SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+        SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+        SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+        SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+        /* onboard */
+        0, 0, 0, 0,
+        SUN4M_INT_SCSI,  0, SUN4M_INT_ETHERNET, 0,
+        SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
+        SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
+        (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
+        SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR,
+        /* sbus */
+        0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
+        0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
+        0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
+        0, SUN4M_INT_SBUS(6), 0, 0,
+        /* vme */
+        0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
+        0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
+        0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
+        0, SUN4M_INT_VME(6), 0, 0
 };
 
-static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
-
-static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
-                                       unsigned int sbint)
-{
-        if (sbint >= sizeof(sun4m_pil_map)) {
-                printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
-                BUG();
-        }
-        return sun4m_pil_map[sbint] | 0x30;
-}
-
 static unsigned long sun4m_get_irqmask(unsigned int irq)
 {
         unsigned long mask;
     
-        if (irq > 0x20) {
-                /* OBIO/SBUS interrupts */
-                irq &= 0x1f;
-                mask = irq_mask[irq_xlate[irq]];
-                if (!mask)
-                        printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq);
-        } else {
-                /* Soft Interrupts will come here.
-                 * Currently there is no way to trigger them but I'm sure
-                 * something could be cooked up.
-                 */
-                irq &= 0xf;
-                mask = SUN4M_SOFT_INT(irq);
-        }
+        if (irq < 0x50)
+                mask = irq_mask[irq];
+        else
+                mask = 0;
+
+        if (!mask)
+                printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n",
+                       irq);
+
         return mask;
 }
 
@@ -193,9 +215,9 @@ static void sun4m_disable_irq(unsigned int irq_nr)
         mask = sun4m_get_irqmask(irq_nr);
         local_irq_save(flags);
         if (irq_nr > 15)
-                sun4m_interrupts->set = mask;
+                sbus_writel(mask, &sun4m_irq_global->mask_set);
         else
-                sun4m_interrupts->cpu_intregs[cpu].set = mask;
+                sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
         local_irq_restore(flags);    
 }
 
@@ -212,13 +234,13 @@ static void sun4m_enable_irq(unsigned int irq_nr)
                 mask = sun4m_get_irqmask(irq_nr);
                 local_irq_save(flags);
                 if (irq_nr > 15)
-                        sun4m_interrupts->clear = mask;
+                        sbus_writel(mask, &sun4m_irq_global->mask_clear);
                 else
-                        sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+                        sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
                 local_irq_restore(flags);    
         } else {
                 local_irq_save(flags);
-                sun4m_interrupts->clear = SUN4M_INT_FLOPPY;
+                sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear);
                 local_irq_restore(flags);
         }
 }
@@ -236,10 +258,10 @@ static unsigned long cpu_pil_to_imask[16] = {
 /*9*/   SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR,
 /*10*/  SUN4M_INT_REALTIME,
 /*11*/  SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY,
-/*12*/  SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
-/*13*/  SUN4M_INT_AUDIO,
+/*12*/  SUN4M_INT_SERIAL  | SUN4M_INT_KBDMS,
+/*13*/  SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO,
 /*14*/  SUN4M_INT_E14,
-/*15*/  0x00000000
+/*15*/  SUN4M_INT_ERROR
 };
 
 /* We assume the caller has disabled local interrupts when these are called,
@@ -247,126 +269,141 @@ static unsigned long cpu_pil_to_imask[16] = {
  */
 static void sun4m_disable_pil_irq(unsigned int pil)
 {
-        sun4m_interrupts->set = cpu_pil_to_imask[pil];
+        sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set);
 }
 
 static void sun4m_enable_pil_irq(unsigned int pil)
 {
-        sun4m_interrupts->clear = cpu_pil_to_imask[pil];
+        sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear);
 }
 
 #ifdef CONFIG_SMP
 static void sun4m_send_ipi(int cpu, int level)
 {
-        unsigned long mask;
-
-        mask = sun4m_get_irqmask(level);
-        sun4m_interrupts->cpu_intregs[cpu].set = mask;
+        unsigned long mask = sun4m_get_irqmask(level);
+        sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
 }
 
 static void sun4m_clear_ipi(int cpu, int level)
 {
-        unsigned long mask;
-
-        mask = sun4m_get_irqmask(level);
-        sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+        unsigned long mask = sun4m_get_irqmask(level);
+        sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
 }
 
 static void sun4m_set_udt(int cpu)
 {
-        sun4m_interrupts->undirected_target = cpu;
+        sbus_writel(cpu, &sun4m_irq_global->interrupt_target);
 }
 #endif
 
-#define OBIO_INTR       0x20
-#define TIMER_IRQ       (OBIO_INTR | 10)
-#define PROFILE_IRQ     (OBIO_INTR | 14)
+struct sun4m_timer_percpu {
+        u32             l14_limit;
+        u32             l14_count;
+        u32             l14_limit_noclear;
+        u32             user_timer_start_stop;
+};
+
+static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
+
+struct sun4m_timer_global {
+        u32             l10_limit;
+        u32             l10_count;
+        u32             l10_limit_noclear;
+        u32             reserved;
+        u32             timer_config;
+};
+
+static struct sun4m_timer_global __iomem *timers_global;
+
+#define TIMER_IRQ       (OBP_INT_LEVEL_ONBOARD | 10)
 
-static struct sun4m_timer_regs *sun4m_timers;
 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
 
 static void sun4m_clear_clock_irq(void)
 {
-        volatile unsigned int clear_intr;
-        clear_intr = sun4m_timers->l10_timer_limit;
+        sbus_readl(&timers_global->l10_limit);
 }
 
-static void sun4m_clear_profile_irq(int cpu)
+void sun4m_nmi(struct pt_regs *regs)
 {
-        volatile unsigned int clear;
-    
-        clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit;
+        unsigned long afsr, afar, si;
+
+        printk(KERN_ERR "Aieee: sun4m NMI received!\n");
+        /* XXX HyperSparc hack XXX */
+        __asm__ __volatile__("mov 0x500, %%g1\n\t"
+                             "lda [%%g1] 0x4, %0\n\t"
+                             "mov 0x600, %%g1\n\t"
+                             "lda [%%g1] 0x4, %1\n\t" :
+                             "=r" (afsr), "=r" (afar));
+        printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
+        si = sbus_readl(&sun4m_irq_global->pending);
+        printk(KERN_ERR "si=%08lx\n", si);
+        if (si & SUN4M_INT_MODULE_ERR)
+                printk(KERN_ERR "Module async error\n");
+        if (si & SUN4M_INT_M2S_WRITE_ERR)
+                printk(KERN_ERR "MBus/SBus async error\n");
+        if (si & SUN4M_INT_ECC_ERR)
+                printk(KERN_ERR "ECC memory error\n");
+        if (si & SUN4M_INT_VME_ERR)
+                printk(KERN_ERR "VME async error\n");
+        printk(KERN_ERR "you lose buddy boy...\n");
+        show_regs(regs);
+        prom_halt();
+}
+
+/* Exported for sun4m_smp.c */
+void sun4m_clear_profile_irq(int cpu)
+{
+        sbus_readl(&timers_percpu[cpu]->l14_limit);
 }
 
 static void sun4m_load_profile_irq(int cpu, unsigned int limit)
 {
-        sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
+        sbus_writel(limit, &timers_percpu[cpu]->l14_limit);
 }
 
 static void __init sun4m_init_timers(irq_handler_t counter_fn)
 {
-        int reg_count, irq, cpu;
-        struct linux_prom_registers cnt_regs[PROMREG_MAX];
-        int obio_node, cnt_node;
-        struct resource r;
-
-        cnt_node = 0;
-        if((obio_node =
-            prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
-           (obio_node = prom_getchild (obio_node)) == 0 ||
-           (cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
-                prom_printf("Cannot find /obio/counter node\n");
-                prom_halt();
+        struct device_node *dp = of_find_node_by_name(NULL, "counter");
+        int i, err, len, num_cpu_timers;
+        const u32 *addr;
+
+        if (!dp) {
+                printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
+                return;
         }
-        reg_count = prom_getproperty(cnt_node, "reg",
-                                     (void *) cnt_regs, sizeof(cnt_regs));
-        reg_count = (reg_count/sizeof(struct linux_prom_registers));
-    
-        /* Apply the obio ranges to the timer registers. */
-        prom_apply_obio_ranges(cnt_regs, reg_count);
-    
-        cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
-        cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
-        cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
-        for(obio_node = 1; obio_node < 4; obio_node++) {
-                cnt_regs[obio_node].phys_addr =
-                        cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
-                cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
-                cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
+
+        addr = of_get_property(dp, "address", &len);
+        if (!addr) {
+                printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
+                return;
         }
 
-        memset((char*)&r, 0, sizeof(struct resource));
-        /* Map the per-cpu Counter registers. */
-        r.flags = cnt_regs[0].which_io;
-        r.start = cnt_regs[0].phys_addr;
-        sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0,
-            PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt");
-        /* Map the system Counter register. */
-        /* XXX Here we expect consequent calls to yeld adjusent maps. */
-        r.flags = cnt_regs[4].which_io;
-        r.start = cnt_regs[4].phys_addr;
-        sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt");
-
-        sun4m_timers->l10_timer_limit =  (((1000000/HZ) + 1) << 10);
-        master_l10_counter = &sun4m_timers->l10_cur_count;
-        master_l10_limit = &sun4m_timers->l10_timer_limit;
-
-        irq = request_irq(TIMER_IRQ,
-                          counter_fn,
-                          (IRQF_DISABLED | SA_STATIC_ALLOC),
-                          "timer", NULL);
-        if (irq) {
-                prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
-                prom_halt();
+        num_cpu_timers = (len / sizeof(u32)) - 1;
+        for (i = 0; i < num_cpu_timers; i++) {
+                timers_percpu[i] = (void __iomem *)
+                        (unsigned long) addr[i];
         }
-   
-        if (!cpu_find_by_instance(1, NULL, NULL)) {
-                for(cpu = 0; cpu < 4; cpu++)
-                        sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
-                sun4m_interrupts->set = SUN4M_INT_E14;
-        } else {
-                sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
+        timers_global = (void __iomem *)
+                (unsigned long) addr[num_cpu_timers];
+
+        sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
+
+        master_l10_counter = &timers_global->l10_count;
+
+        err = request_irq(TIMER_IRQ, counter_fn,
+                          (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
+        if (err) {
+                printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
+                        err);
+                return;
         }
+
+        for (i = 0; i < num_cpu_timers; i++)
+                sbus_writel(0, &timers_percpu[i]->l14_limit);
+        if (num_cpu_timers == 4)
+                sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
+
 #ifdef CONFIG_SMP
         {
                 unsigned long flags;
@@ -390,70 +427,43 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn)
 
 void __init sun4m_init_IRQ(void)
 {
-        int ie_node,i;
-        struct linux_prom_registers int_regs[PROMREG_MAX];
-        int num_regs;
-        struct resource r;
-        int mid;
-    
-        local_irq_disable();
-        if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 ||
-           (ie_node = prom_getchild (ie_node)) == 0 ||
-           (ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) {
-                prom_printf("Cannot find /obio/interrupt node\n");
-                prom_halt();
+        struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
+        int len, i, mid, num_cpu_iregs;
+        const u32 *addr;
+
+        if (!dp) {
+                printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
+                return;
         }
-        num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs,
-                                    sizeof(int_regs));
-        num_regs = (num_regs/sizeof(struct linux_prom_registers));
-    
-        /* Apply the obio ranges to these registers. */
-        prom_apply_obio_ranges(int_regs, num_regs);
-    
-        int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr;
-        int_regs[4].reg_size = int_regs[num_regs-1].reg_size;
-        int_regs[4].which_io = int_regs[num_regs-1].which_io;
-        for(ie_node = 1; ie_node < 4; ie_node++) {
-                int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE;
-                int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size;
-                int_regs[ie_node].which_io = int_regs[ie_node-1].which_io;
+
+        addr = of_get_property(dp, "address", &len);
+        if (!addr) {
+                printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
+                return;
         }
 
-        memset((char *)&r, 0, sizeof(struct resource));
-        /* Map the interrupt registers for all possible cpus. */
-        r.flags = int_regs[0].which_io;
-        r.start = int_regs[0].phys_addr;
-        sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0,
-            PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu");
+        num_cpu_iregs = (len / sizeof(u32)) - 1;
+        for (i = 0; i < num_cpu_iregs; i++) {
+                sun4m_irq_percpu[i] = (void __iomem *)
+                        (unsigned long) addr[i];
+        }
+        sun4m_irq_global = (void __iomem *)
+                (unsigned long) addr[num_cpu_iregs];
 
-        /* Map the system interrupt control registers. */
-        r.flags = int_regs[4].which_io;
-        r.start = int_regs[4].phys_addr;
-        sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system");
+        local_irq_disable();
 
-        sun4m_interrupts->set = ~SUN4M_INT_MASKALL;
+        sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
         for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
-                sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff;
-
-        if (!cpu_find_by_instance(1, NULL, NULL)) {
-                /* system wide interrupts go to cpu 0, this should always
-                 * be safe because it is guaranteed to be fitted or OBP doesn't
-                 * come up
-                 *
-                 * Not sure, but writing here on SLAVIO systems may puke
-                 * so I don't do it unless there is more than 1 cpu.
-                 */
-                irq_rcvreg = (unsigned long *)
-                                &sun4m_interrupts->undirected_target;
-                sun4m_interrupts->undirected_target = 0;
-        }
-        BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM);
+                sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
+
+        if (num_cpu_iregs == 4)
+                sbus_writel(0, &sun4m_irq_global->interrupt_target);
+
         BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
         BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
         BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
         BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
         BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
-        BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
         BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
         sparc_init_timers = sun4m_init_timers;
 #ifdef CONFIG_SMP
@@ -461,5 +471,6 @@ void __init sun4m_init_IRQ(void)
         BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
         BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
 #endif
+
         /* Cannot enable interrupts until OBP ticker is disabled. */
 }