Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 272 insertions, 0 deletions

diff --git a/arch/sh64/kernel/irq_intc.c b/arch/sh64/kernel/irq_intc.c
new file mode 100644
index 000000000000..43f88f3a78b0
--- /dev/null
+++ b/arch/sh64/kernel/irq_intc.c
@@ -0,0 +1,272 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/irq_intc.c
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * Interrupt Controller support for SH5 INTC.
+ * Per-interrupt selective. IRLM=0 (Fixed priority) is not
+ * supported being useless without a cascaded interrupt
+ * controller.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/bitops.h>       /* this includes also <asm/registers.h */
+                                /* which is required to remap register */
+                                /* names used into __asm__ blocks...   */
+
+#include <asm/hardware.h>
+#include <asm/platform.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Maybe the generic Peripheral block could move to a more
+ * generic include file. INTC Block will be defined here
+ * and only here to make INTC self-contained in a single
+ * file.
+ */
+#define INTC_BLOCK_OFFSET       0x01000000
+
+/* Base */
+#define INTC_BASE               PHYS_PERIPHERAL_BLOCK + \
+                                INTC_BLOCK_OFFSET
+
+/* Address */
+#define INTC_ICR_SET            (intc_virt + 0x0)
+#define INTC_ICR_CLEAR          (intc_virt + 0x8)
+#define INTC_INTPRI_0           (intc_virt + 0x10)
+#define INTC_INTSRC_0           (intc_virt + 0x50)
+#define INTC_INTSRC_1           (intc_virt + 0x58)
+#define INTC_INTREQ_0           (intc_virt + 0x60)
+#define INTC_INTREQ_1           (intc_virt + 0x68)
+#define INTC_INTENB_0           (intc_virt + 0x70)
+#define INTC_INTENB_1           (intc_virt + 0x78)
+#define INTC_INTDSB_0           (intc_virt + 0x80)
+#define INTC_INTDSB_1           (intc_virt + 0x88)
+
+#define INTC_ICR_IRLM           0x1
+#define INTC_INTPRI_PREGS       8               /* 8 Priority Registers */
+#define INTC_INTPRI_PPREG       8               /* 8 Priorities per Register */
+
+
+/*
+ * Mapper between the vector ordinal and the IRQ number
+ * passed to kernel/device drivers.
+ */
+int intc_evt_to_irq[(0xE20/0x20)+1] = {
+        -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */
+        -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */
+         0,  0,  0,  0,  0,  1,  0,  0, /* 0x200 - 0x2E0 */
+         2,  0,  0,  3,  0,  0,  0, -1, /* 0x300 - 0x3E0 */
+        32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */
+        -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */
+        -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */
+        39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */
+         4,  5,  6,  7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */
+        -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */
+        12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */
+        -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */
+        -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */
+        -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */
+        -1, -1                          /* 0xE00 - 0xE20 */
+};
+
+/*
+ * Opposite mapper.
+ */
+static int IRQ_to_vectorN[NR_INTC_IRQS] = {
+        0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /*  0- 7 */
+          -1,   -1,   -1,   -1, 0x50, 0x51, 0x52, 0x53, /*  8-15 */
+        0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36,   -1, /* 16-23 */
+          -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 24-31 */
+        0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */
+        0x39, 0x3A, 0x3B,   -1,   -1,   -1,   -1,   -1, /* 40-47 */
+          -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 48-55 */
+          -1,   -1,   -1,   -1,   -1,   -1,   -1, 0x2B, /* 56-63 */
+
+};
+
+static unsigned long intc_virt;
+
+static unsigned int startup_intc_irq(unsigned int irq);
+static void shutdown_intc_irq(unsigned int irq);
+static void enable_intc_irq(unsigned int irq);
+static void disable_intc_irq(unsigned int irq);
+static void mask_and_ack_intc(unsigned int);
+static void end_intc_irq(unsigned int irq);
+
+static struct hw_interrupt_type intc_irq_type = {
+        "INTC",
+        startup_intc_irq,
+        shutdown_intc_irq,
+        enable_intc_irq,
+        disable_intc_irq,
+        mask_and_ack_intc,
+        end_intc_irq
+};
+
+static int irlm;                /* IRL mode */
+
+static unsigned int startup_intc_irq(unsigned int irq)
+{
+        enable_intc_irq(irq);
+        return 0; /* never anything pending */
+}
+
+static void shutdown_intc_irq(unsigned int irq)
+{
+        disable_intc_irq(irq);
+}
+
+static void enable_intc_irq(unsigned int irq)
+{
+        unsigned long reg;
+        unsigned long bitmask;
+
+        if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
+                printk("Trying to use straight IRL0-3 with an encoding platform.\n");
+
+        if (irq < 32) {
+                reg = INTC_INTENB_0;
+                bitmask = 1 << irq;
+        } else {
+                reg = INTC_INTENB_1;
+                bitmask = 1 << (irq - 32);
+        }
+
+        ctrl_outl(bitmask, reg);
+}
+
+static void disable_intc_irq(unsigned int irq)
+{
+        unsigned long reg;
+        unsigned long bitmask;
+
+        if (irq < 32) {
+                reg = INTC_INTDSB_0;
+                bitmask = 1 << irq;
+        } else {
+                reg = INTC_INTDSB_1;
+                bitmask = 1 << (irq - 32);
+        }
+
+        ctrl_outl(bitmask, reg);
+}
+
+static void mask_and_ack_intc(unsigned int irq)
+{
+        disable_intc_irq(irq);
+}
+
+static void end_intc_irq(unsigned int irq)
+{
+        enable_intc_irq(irq);
+}
+
+/* For future use, if we ever support IRLM=0) */
+void make_intc_irq(unsigned int irq)
+{
+        disable_irq_nosync(irq);
+        irq_desc[irq].handler = &intc_irq_type;
+        disable_intc_irq(irq);
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int intc_irq_describe(char* p, int irq)
+{
+        if (irq < NR_INTC_IRQS)
+                return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20);
+        else
+                return 0;
+}
+#endif
+
+void __init init_IRQ(void)
+{
+        unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
+        unsigned long reg;
+        unsigned long data;
+        int i;
+
+        intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
+        if (!intc_virt) {
+                panic("Unable to remap INTC\n");
+        }
+
+
+        /* Set default: per-line enable/disable, priority driven ack/eoi */
+        for (i = 0; i < NR_INTC_IRQS; i++) {
+                if (platform_int_priority[i] != NO_PRIORITY) {
+                        irq_desc[i].handler = &intc_irq_type;
+                }
+        }
+
+
+        /* Disable all interrupts and set all priorities to 0 to avoid trouble */
+        ctrl_outl(-1, INTC_INTDSB_0);
+        ctrl_outl(-1, INTC_INTDSB_1);
+
+        for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
+                ctrl_outl( NO_PRIORITY, reg);
+
+
+        /* Set IRLM */
+        /* If all the priorities are set to 'no priority', then
+         * assume we are using encoded mode.
+         */
+        irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
+                platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
+
+        if (irlm == NO_PRIORITY) {
+                /* IRLM = 0 */
+                reg = INTC_ICR_CLEAR;
+                i = IRQ_INTA;
+                printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
+        } else {
+                /* IRLM = 1 */
+                reg = INTC_ICR_SET;
+                i = IRQ_IRL0;
+        }
+        ctrl_outl(INTC_ICR_IRLM, reg);
+
+        /* Set interrupt priorities according to platform description */
+        for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
+                data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
+                if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
+                        /* Upon the 7th, set Priority Register */
+                        ctrl_outl(data, reg);
+                        data = 0;
+                        reg += 8;
+                }
+        }
+
+#ifdef CONFIG_SH_CAYMAN
+        {
+                extern void init_cayman_irq(void);
+
+                init_cayman_irq();
+        }
+#endif
+
+        /*
+         * And now let interrupts come in.
+         * sti() is not enough, we need to
+         * lower priority, too.
+         */
+        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
+                             "and       %0, %1, %0\n\t"
+                             "putcon    %0, " __SR "\n\t"
+                             : "=&r" (__dummy0)
+                             : "r" (__dummy1));
+}