sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec

Update the sh7724 processor code to always enable vpu_clk.

On the Ecovec board, set the vpu_clk to 166 Mhz.

The 166MHz setting results in a divide-by-6 setup for
vpu_clk and improves the VPU performance compared to the
power-on-reset/bootloader configuration.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 1 insertions, 1 deletions

diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index a8a993fc894a..6707061fbf54 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -159,7 +159,7 @@ struct clk div4_clks[DIV4_NR] = {
         [DIV4_SH] = DIV4("shyway_clk", FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
         [DIV4_B] = DIV4("bus_clk", FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
         [DIV4_P] = DIV4("peripheral_clk", FRQCRA, 0, 0x2f7c, 0),
-        [DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, 0),
+        [DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
 };
 
 struct clk div6_clks[] = {