diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 19:54:27 -0500 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-26 19:54:27 -0500 |
commit | 64d497f55379b1e320a08ec2426468d96f5642ec (patch) | |
tree | 22b9ab3c5e69c5cc2728cbc2ca7fc7623beef8f1 /arch/sh/drivers/pci | |
parent | 37d4008484977f60d5d37499a2670c79b214dd46 (diff) | |
parent | b5f5fe80fa98a60daa0fa94512d1599b1e26674c (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
sh: remove dead LED code for migo-r and ms7724se
sh: ecovec build fix for CONFIG_I2C=n
sh: ecovec r-standby support
sh: ms7724se r-standby support
sh: SH-Mobile R-standby register save/restore
clocksource: Fix up a registration/IRQ race in the sh drivers.
sh: ms7724: modify scan_timing for KEYSC
sh: ms7724: Add sh_sir support
sh: mach-ecovec24: Add sh_sir support
sh: wire up SET/GET_UNALIGN_CTL.
sh: allow alignment fault mode to be configured at kernel boot.
sh: sh7724: Update FSI/SPU2 clock
sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
sh: add sh7724 kick callback to clk_div4_table
sh: introduce struct clk_div4_table
sh: clock-cpg div4 set_rate() shift fix
sh: Turn on speculative return for SH7785 and SH7786
sh: Merge legacy and dynamic PMB modes.
sh: Use uncached I/O helpers in PMB setup.
sh: Provide uncached I/O helpers.
...
Diffstat (limited to 'arch/sh/drivers/pci')
-rw-r--r-- | arch/sh/drivers/pci/Makefile | 5 | ||||
-rw-r--r-- | arch/sh/drivers/pci/common.c | 162 | ||||
-rw-r--r-- | arch/sh/drivers/pci/fixups-dreamcast.c | 2 | ||||
-rw-r--r-- | arch/sh/drivers/pci/fixups-r7780rp.c | 12 | ||||
-rw-r--r-- | arch/sh/drivers/pci/fixups-rts7751r2d.c | 4 | ||||
-rw-r--r-- | arch/sh/drivers/pci/fixups-sdk7780.c | 19 | ||||
-rw-r--r-- | arch/sh/drivers/pci/fixups-se7751.c | 6 | ||||
-rw-r--r-- | arch/sh/drivers/pci/ops-sh4.c | 30 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-dreamcast.c | 32 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh4.h | 18 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh5.c | 19 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh5.h | 12 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh7751.c | 52 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh7780.c | 408 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh7780.h | 64 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci.c | 167 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pcie-sh7786.c | 205 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pcie-sh7786.h | 74 |
18 files changed, 857 insertions, 434 deletions
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 08af1f459756..4a59e6890876 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile | |||
@@ -1,14 +1,14 @@ | |||
1 | # | 1 | # |
2 | # Makefile for the PCI specific kernel interface routines under Linux. | 2 | # Makefile for the PCI specific kernel interface routines under Linux. |
3 | # | 3 | # |
4 | obj-y += pci.o | 4 | obj-y += common.o pci.o |
5 | 5 | ||
6 | obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o | 6 | obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o |
7 | obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o | 7 | obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o |
8 | obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o | 8 | obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o |
9 | obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o | 9 | obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o |
10 | obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o | 10 | obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o |
11 | obj-$(CONFIG_CPU_SUBTYPE_SH7786) += ops-sh7786.o | 11 | obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o |
12 | obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o | 12 | obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o |
13 | 13 | ||
14 | obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ | 14 | obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ |
@@ -25,4 +25,3 @@ obj-$(CONFIG_SH_TITAN) += fixups-titan.o | |||
25 | obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o | 25 | obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o |
26 | obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o | 26 | obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o |
27 | obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o | 27 | obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o |
28 | obj-$(CONFIG_SH_URQUELL) += pcie-sh7786.o | ||
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c new file mode 100644 index 000000000000..dbf138199871 --- /dev/null +++ b/arch/sh/drivers/pci/common.c | |||
@@ -0,0 +1,162 @@ | |||
1 | #include <linux/pci.h> | ||
2 | #include <linux/interrupt.h> | ||
3 | #include <linux/timer.h> | ||
4 | #include <linux/kernel.h> | ||
5 | |||
6 | /* | ||
7 | * These functions are used early on before PCI scanning is done | ||
8 | * and all of the pci_dev and pci_bus structures have been created. | ||
9 | */ | ||
10 | static struct pci_dev *fake_pci_dev(struct pci_channel *hose, | ||
11 | int top_bus, int busnr, int devfn) | ||
12 | { | ||
13 | static struct pci_dev dev; | ||
14 | static struct pci_bus bus; | ||
15 | |||
16 | dev.bus = &bus; | ||
17 | dev.sysdata = hose; | ||
18 | dev.devfn = devfn; | ||
19 | bus.number = busnr; | ||
20 | bus.sysdata = hose; | ||
21 | bus.ops = hose->pci_ops; | ||
22 | |||
23 | if(busnr != top_bus) | ||
24 | /* Fake a parent bus structure. */ | ||
25 | bus.parent = &bus; | ||
26 | else | ||
27 | bus.parent = NULL; | ||
28 | |||
29 | return &dev; | ||
30 | } | ||
31 | |||
32 | #define EARLY_PCI_OP(rw, size, type) \ | ||
33 | int __init early_##rw##_config_##size(struct pci_channel *hose, \ | ||
34 | int top_bus, int bus, int devfn, int offset, type value) \ | ||
35 | { \ | ||
36 | return pci_##rw##_config_##size( \ | ||
37 | fake_pci_dev(hose, top_bus, bus, devfn), \ | ||
38 | offset, value); \ | ||
39 | } | ||
40 | |||
41 | EARLY_PCI_OP(read, byte, u8 *) | ||
42 | EARLY_PCI_OP(read, word, u16 *) | ||
43 | EARLY_PCI_OP(read, dword, u32 *) | ||
44 | EARLY_PCI_OP(write, byte, u8) | ||
45 | EARLY_PCI_OP(write, word, u16) | ||
46 | EARLY_PCI_OP(write, dword, u32) | ||
47 | |||
48 | int __init pci_is_66mhz_capable(struct pci_channel *hose, | ||
49 | int top_bus, int current_bus) | ||
50 | { | ||
51 | u32 pci_devfn; | ||
52 | unsigned short vid; | ||
53 | int cap66 = -1; | ||
54 | u16 stat; | ||
55 | |||
56 | printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); | ||
57 | |||
58 | for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { | ||
59 | if (PCI_FUNC(pci_devfn)) | ||
60 | continue; | ||
61 | if (early_read_config_word(hose, top_bus, current_bus, | ||
62 | pci_devfn, PCI_VENDOR_ID, &vid) != | ||
63 | PCIBIOS_SUCCESSFUL) | ||
64 | continue; | ||
65 | if (vid == 0xffff) | ||
66 | continue; | ||
67 | |||
68 | /* check 66MHz capability */ | ||
69 | if (cap66 < 0) | ||
70 | cap66 = 1; | ||
71 | if (cap66) { | ||
72 | early_read_config_word(hose, top_bus, current_bus, | ||
73 | pci_devfn, PCI_STATUS, &stat); | ||
74 | if (!(stat & PCI_STATUS_66MHZ)) { | ||
75 | printk(KERN_DEBUG | ||
76 | "PCI: %02x:%02x not 66MHz capable.\n", | ||
77 | current_bus, pci_devfn); | ||
78 | cap66 = 0; | ||
79 | break; | ||
80 | } | ||
81 | } | ||
82 | } | ||
83 | |||
84 | return cap66 > 0; | ||
85 | } | ||
86 | |||
87 | static void pcibios_enable_err(unsigned long __data) | ||
88 | { | ||
89 | struct pci_channel *hose = (struct pci_channel *)__data; | ||
90 | |||
91 | del_timer(&hose->err_timer); | ||
92 | printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n"); | ||
93 | enable_irq(hose->err_irq); | ||
94 | } | ||
95 | |||
96 | static void pcibios_enable_serr(unsigned long __data) | ||
97 | { | ||
98 | struct pci_channel *hose = (struct pci_channel *)__data; | ||
99 | |||
100 | del_timer(&hose->serr_timer); | ||
101 | printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n"); | ||
102 | enable_irq(hose->serr_irq); | ||
103 | } | ||
104 | |||
105 | void pcibios_enable_timers(struct pci_channel *hose) | ||
106 | { | ||
107 | if (hose->err_irq) { | ||
108 | init_timer(&hose->err_timer); | ||
109 | hose->err_timer.data = (unsigned long)hose; | ||
110 | hose->err_timer.function = pcibios_enable_err; | ||
111 | } | ||
112 | |||
113 | if (hose->serr_irq) { | ||
114 | init_timer(&hose->serr_timer); | ||
115 | hose->serr_timer.data = (unsigned long)hose; | ||
116 | hose->serr_timer.function = pcibios_enable_serr; | ||
117 | } | ||
118 | } | ||
119 | |||
120 | /* | ||
121 | * A simple handler for the regular PCI status errors, called from IRQ | ||
122 | * context. | ||
123 | */ | ||
124 | unsigned int pcibios_handle_status_errors(unsigned long addr, | ||
125 | unsigned int status, | ||
126 | struct pci_channel *hose) | ||
127 | { | ||
128 | unsigned int cmd = 0; | ||
129 | |||
130 | if (status & PCI_STATUS_REC_MASTER_ABORT) { | ||
131 | printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr); | ||
132 | cmd |= PCI_STATUS_REC_MASTER_ABORT; | ||
133 | } | ||
134 | |||
135 | if (status & PCI_STATUS_REC_TARGET_ABORT) { | ||
136 | printk(KERN_DEBUG "PCI: target abort: "); | ||
137 | pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT | | ||
138 | PCI_STATUS_SIG_TARGET_ABORT | | ||
139 | PCI_STATUS_REC_MASTER_ABORT, 1); | ||
140 | printk("\n"); | ||
141 | |||
142 | cmd |= PCI_STATUS_REC_TARGET_ABORT; | ||
143 | } | ||
144 | |||
145 | if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) { | ||
146 | printk(KERN_DEBUG "PCI: parity error detected: "); | ||
147 | pcibios_report_status(PCI_STATUS_PARITY | | ||
148 | PCI_STATUS_DETECTED_PARITY, 1); | ||
149 | printk("\n"); | ||
150 | |||
151 | cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY; | ||
152 | |||
153 | /* Now back off of the IRQ for awhile */ | ||
154 | if (hose->err_irq) { | ||
155 | disable_irq_nosync(hose->err_irq); | ||
156 | hose->err_timer.expires = jiffies + HZ; | ||
157 | add_timer(&hose->err_timer); | ||
158 | } | ||
159 | } | ||
160 | |||
161 | return cmd; | ||
162 | } | ||
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index ed7f489936f1..942ef4f155f5 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c | |||
@@ -39,7 +39,7 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) | |||
39 | /* | 39 | /* |
40 | * We also assume that dev->devfn == 0 | 40 | * We also assume that dev->devfn == 0 |
41 | */ | 41 | */ |
42 | dev->resource[1].start = p->io_resource->start + 0x100; | 42 | dev->resource[1].start = p->resources[0].start + 0x100; |
43 | dev->resource[1].end = dev->resource[1].start + 0x200 - 1; | 43 | dev->resource[1].end = dev->resource[1].start + 0x200 - 1; |
44 | 44 | ||
45 | /* | 45 | /* |
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 15ca65cb667e..08b2d8658a00 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c | |||
@@ -22,15 +22,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) | |||
22 | { | 22 | { |
23 | return irq_tab[slot]; | 23 | return irq_tab[slot]; |
24 | } | 24 | } |
25 | |||
26 | int pci_fixup_pcic(struct pci_channel *chan) | ||
27 | { | ||
28 | pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); | ||
29 | pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); | ||
30 | pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); | ||
31 | pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); | ||
32 | pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); | ||
33 | pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); | ||
34 | |||
35 | return 0; | ||
36 | } | ||
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 7898f14d6641..e248516118a9 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c | |||
@@ -43,7 +43,7 @@ int pci_fixup_pcic(struct pci_channel *chan) | |||
43 | { | 43 | { |
44 | unsigned long bcr1, mcr; | 44 | unsigned long bcr1, mcr; |
45 | 45 | ||
46 | bcr1 = ctrl_inl(SH7751_BCR1); | 46 | bcr1 = __raw_readl(SH7751_BCR1); |
47 | bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ | 47 | bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ |
48 | pci_write_reg(chan, bcr1, SH4_PCIBCR1); | 48 | pci_write_reg(chan, bcr1, SH4_PCIBCR1); |
49 | 49 | ||
@@ -54,7 +54,7 @@ int pci_fixup_pcic(struct pci_channel *chan) | |||
54 | pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); | 54 | pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); |
55 | pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); | 55 | pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); |
56 | 56 | ||
57 | mcr = ctrl_inl(SH7751_MCR); | 57 | mcr = __raw_readl(SH7751_MCR); |
58 | mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; | 58 | mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; |
59 | pci_write_reg(chan, mcr, SH4_PCIMCR); | 59 | pci_write_reg(chan, mcr, SH4_PCIMCR); |
60 | 60 | ||
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 250b0edd7365..0930f988ac29 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c | |||
@@ -31,22 +31,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) | |||
31 | { | 31 | { |
32 | return sdk7780_irq_tab[pin-1][slot]; | 32 | return sdk7780_irq_tab[pin-1][slot]; |
33 | } | 33 | } |
34 | int pci_fixup_pcic(struct pci_channel *chan) | ||
35 | { | ||
36 | /* Enable all interrupts, so we know what to fix */ | ||
37 | pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); | ||
38 | |||
39 | /* Set up standard PCI config registers */ | ||
40 | pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ | ||
41 | pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */ | ||
42 | pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */ | ||
43 | |||
44 | pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); | ||
45 | pci_write_reg(chan, 0x00000000, SH4_PCILAR1); | ||
46 | pci_write_reg(chan, 0x00000000, SH4_PCILSR1); | ||
47 | |||
48 | pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); | ||
49 | pci_write_reg(chan, 0xA5000C01, SH4_PCICR); | ||
50 | |||
51 | return 0; | ||
52 | } | ||
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c index 475fa9f0fe2c..a4c7d3a4efca 100644 --- a/arch/sh/drivers/pci/fixups-se7751.c +++ b/arch/sh/drivers/pci/fixups-se7751.c | |||
@@ -97,12 +97,12 @@ int pci_fixup_pcic(struct pci_channel *chan) | |||
97 | * meaning all calls go straight through... use BUG_ON to | 97 | * meaning all calls go straight through... use BUG_ON to |
98 | * catch erroneous assumption. | 98 | * catch erroneous assumption. |
99 | */ | 99 | */ |
100 | BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE); | 100 | BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE); |
101 | 101 | ||
102 | PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start); | 102 | PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start); |
103 | 103 | ||
104 | /* Set IOBR for window containing area specified in pci.h */ | 104 | /* Set IOBR for window containing area specified in pci.h */ |
105 | PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK)); | 105 | PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK)); |
106 | 106 | ||
107 | /* All done, may as well say so... */ | 107 | /* All done, may as well say so... */ |
108 | printk("SH7751 PCI: Finished initialization of the PCI controller\n"); | 108 | printk("SH7751 PCI: Finished initialization of the PCI controller\n"); |
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 78bebebdc99c..0b81999fb88b 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c | |||
@@ -16,7 +16,7 @@ | |||
16 | * Direct access to PCI hardware... | 16 | * Direct access to PCI hardware... |
17 | */ | 17 | */ |
18 | #define CONFIG_CMD(bus, devfn, where) \ | 18 | #define CONFIG_CMD(bus, devfn, where) \ |
19 | (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3)) | 19 | (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) |
20 | 20 | ||
21 | static DEFINE_SPINLOCK(sh4_pci_lock); | 21 | static DEFINE_SPINLOCK(sh4_pci_lock); |
22 | 22 | ||
@@ -102,34 +102,6 @@ struct pci_ops sh4_pci_ops = { | |||
102 | .write = sh4_pci_write, | 102 | .write = sh4_pci_write, |
103 | }; | 103 | }; |
104 | 104 | ||
105 | /* | ||
106 | * Not really related to pci_ops, but it's common and not worth shoving | ||
107 | * somewhere else for now.. | ||
108 | */ | ||
109 | int __init sh4_pci_check_direct(struct pci_channel *chan) | ||
110 | { | ||
111 | /* | ||
112 | * Check if configuration works. | ||
113 | */ | ||
114 | unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); | ||
115 | |||
116 | pci_write_reg(chan, P1SEG, SH4_PCIPAR); | ||
117 | |||
118 | if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { | ||
119 | pci_write_reg(chan, tmp, SH4_PCIPAR); | ||
120 | printk(KERN_INFO "PCI: Using configuration type 1\n"); | ||
121 | request_region(chan->reg_base + SH4_PCIPAR, 8, | ||
122 | "PCI conf1"); | ||
123 | return 0; | ||
124 | } | ||
125 | |||
126 | pci_write_reg(chan, tmp, SH4_PCIPAR); | ||
127 | |||
128 | printk(KERN_ERR "PCI: %s failed\n", __func__); | ||
129 | |||
130 | return -EINVAL; | ||
131 | } | ||
132 | |||
133 | int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) | 105 | int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) |
134 | { | 106 | { |
135 | /* Nothing to do. */ | 107 | /* Nothing to do. */ |
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c index 210f9d4af141..633694193af8 100644 --- a/arch/sh/drivers/pci/pci-dreamcast.c +++ b/arch/sh/drivers/pci/pci-dreamcast.c | |||
@@ -25,25 +25,25 @@ | |||
25 | #include <asm/irq.h> | 25 | #include <asm/irq.h> |
26 | #include <mach/pci.h> | 26 | #include <mach/pci.h> |
27 | 27 | ||
28 | static struct resource gapspci_io_resource = { | 28 | static struct resource gapspci_resources[] = { |
29 | .name = "GAPSPCI IO", | 29 | { |
30 | .start = GAPSPCI_BBA_CONFIG, | 30 | .name = "GAPSPCI IO", |
31 | .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, | 31 | .start = GAPSPCI_BBA_CONFIG, |
32 | .flags = IORESOURCE_IO, | 32 | .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, |
33 | }; | 33 | .flags = IORESOURCE_IO, |
34 | 34 | }, { | |
35 | static struct resource gapspci_mem_resource = { | 35 | .name = "GAPSPCI mem", |
36 | .name = "GAPSPCI mem", | 36 | .start = GAPSPCI_DMA_BASE, |
37 | .start = GAPSPCI_DMA_BASE, | 37 | .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, |
38 | .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, | 38 | .flags = IORESOURCE_MEM, |
39 | .flags = IORESOURCE_MEM, | 39 | }, |
40 | }; | 40 | }; |
41 | 41 | ||
42 | static struct pci_channel dreamcast_pci_controller = { | 42 | static struct pci_channel dreamcast_pci_controller = { |
43 | .pci_ops = &gapspci_pci_ops, | 43 | .pci_ops = &gapspci_pci_ops, |
44 | .io_resource = &gapspci_io_resource, | 44 | .resources = gapspci_resources, |
45 | .nr_resources = ARRAY_SIZE(gapspci_resources), | ||
45 | .io_offset = 0x00000000, | 46 | .io_offset = 0x00000000, |
46 | .mem_resource = &gapspci_mem_resource, | ||
47 | .mem_offset = 0x00000000, | 47 | .mem_offset = 0x00000000, |
48 | }; | 48 | }; |
49 | 49 | ||
@@ -95,8 +95,6 @@ static int __init gapspci_init(void) | |||
95 | outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); | 95 | outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); |
96 | outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); | 96 | outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); |
97 | 97 | ||
98 | register_pci_controller(&dreamcast_pci_controller); | 98 | return register_pci_controller(&dreamcast_pci_controller); |
99 | |||
100 | return 0; | ||
101 | } | 99 | } |
102 | arch_initcall(gapspci_init); | 100 | arch_initcall(gapspci_init); |
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 3d5296cde622..cbf763b3015e 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h | |||
@@ -49,6 +49,17 @@ | |||
49 | #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ | 49 | #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ |
50 | #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */ | 50 | #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */ |
51 | #define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */ | 51 | #define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */ |
52 | #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */ | ||
53 | #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */ | ||
54 | #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */ | ||
55 | #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */ | ||
56 | #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */ | ||
57 | #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */ | ||
58 | #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */ | ||
59 | #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */ | ||
60 | #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */ | ||
61 | #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */ | ||
62 | #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */ | ||
52 | #define SH4_PCIALR 0x11C /* Error Address Register */ | 63 | #define SH4_PCIALR 0x11C /* Error Address Register */ |
53 | #define SH4_PCICLR 0x120 /* Error Command/Data */ | 64 | #define SH4_PCICLR 0x120 /* Error Command/Data */ |
54 | #define SH4_PCICLR_MPIO 0x80000000 | 65 | #define SH4_PCICLR_MPIO 0x80000000 |
@@ -61,7 +72,7 @@ | |||
61 | #define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */ | 72 | #define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */ |
62 | #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ | 73 | #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ |
63 | #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ | 74 | #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ |
64 | #define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */ | 75 | #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */ |
65 | #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */ | 76 | #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */ |
66 | #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */ | 77 | #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */ |
67 | #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ | 78 | #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ |
@@ -151,7 +162,6 @@ | |||
151 | 162 | ||
152 | /* arch/sh/kernel/drivers/pci/ops-sh4.c */ | 163 | /* arch/sh/kernel/drivers/pci/ops-sh4.c */ |
153 | extern struct pci_ops sh4_pci_ops; | 164 | extern struct pci_ops sh4_pci_ops; |
154 | int sh4_pci_check_direct(struct pci_channel *chan); | ||
155 | int pci_fixup_pcic(struct pci_channel *chan); | 165 | int pci_fixup_pcic(struct pci_channel *chan); |
156 | 166 | ||
157 | struct sh4_pci_address_space { | 167 | struct sh4_pci_address_space { |
@@ -167,13 +177,13 @@ struct sh4_pci_address_map { | |||
167 | static inline void pci_write_reg(struct pci_channel *chan, | 177 | static inline void pci_write_reg(struct pci_channel *chan, |
168 | unsigned long val, unsigned long reg) | 178 | unsigned long val, unsigned long reg) |
169 | { | 179 | { |
170 | ctrl_outl(val, chan->reg_base + reg); | 180 | __raw_writel(val, chan->reg_base + reg); |
171 | } | 181 | } |
172 | 182 | ||
173 | static inline unsigned long pci_read_reg(struct pci_channel *chan, | 183 | static inline unsigned long pci_read_reg(struct pci_channel *chan, |
174 | unsigned long reg) | 184 | unsigned long reg) |
175 | { | 185 | { |
176 | return ctrl_inl(chan->reg_base + reg); | 186 | return __raw_readl(chan->reg_base + reg); |
177 | } | 187 | } |
178 | 188 | ||
179 | #endif /* __PCI_SH4_H */ | 189 | #endif /* __PCI_SH4_H */ |
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 873ed2b44055..0bf296c78795 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c | |||
@@ -89,14 +89,13 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) | |||
89 | return IRQ_NONE; | 89 | return IRQ_NONE; |
90 | } | 90 | } |
91 | 91 | ||
92 | static struct resource sh5_io_resource = { /* place holder */ }; | 92 | static struct resource sh5_pci_resources[2]; |
93 | static struct resource sh5_mem_resource = { /* place holder */ }; | ||
94 | 93 | ||
95 | static struct pci_channel sh5pci_controller = { | 94 | static struct pci_channel sh5pci_controller = { |
96 | .pci_ops = &sh5_pci_ops, | 95 | .pci_ops = &sh5_pci_ops, |
97 | .mem_resource = &sh5_mem_resource, | 96 | .resources = sh5_pci_resources, |
97 | .nr_resources = ARRAY_SIZE(sh5_pci_resources), | ||
98 | .mem_offset = 0x00000000, | 98 | .mem_offset = 0x00000000, |
99 | .io_resource = &sh5_io_resource, | ||
100 | .io_offset = 0x00000000, | 99 | .io_offset = 0x00000000, |
101 | }; | 100 | }; |
102 | 101 | ||
@@ -210,14 +209,12 @@ static int __init sh5pci_init(void) | |||
210 | SH5PCI_WRITE(AINTM, ~0); | 209 | SH5PCI_WRITE(AINTM, ~0); |
211 | SH5PCI_WRITE(PINTM, ~0); | 210 | SH5PCI_WRITE(PINTM, ~0); |
212 | 211 | ||
213 | sh5_io_resource.start = PCI_IO_AREA; | 212 | sh5_pci_resources[0].start = PCI_IO_AREA; |
214 | sh5_io_resource.end = PCI_IO_AREA + 0x10000; | 213 | sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000; |
215 | 214 | ||
216 | sh5_mem_resource.start = memStart; | 215 | sh5_pci_resources[1].start = memStart; |
217 | sh5_mem_resource.end = memStart + memSize; | 216 | sh5_pci_resources[1].end = memStart + memSize; |
218 | 217 | ||
219 | register_pci_controller(&sh5pci_controller); | 218 | return register_pci_controller(&sh5pci_controller); |
220 | |||
221 | return 0; | ||
222 | } | 219 | } |
223 | arch_initcall(sh5pci_init); | 220 | arch_initcall(sh5pci_init); |
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index f277628221f3..3f01decb4307 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h | |||
@@ -86,14 +86,14 @@ extern unsigned long pcicr_virt; | |||
86 | /* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ | 86 | /* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ |
87 | 87 | ||
88 | /* Write I/O functions */ | 88 | /* Write I/O functions */ |
89 | #define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg)) | 89 | #define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg)) |
90 | #define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg)) | 90 | #define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg)) |
91 | #define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg)) | 91 | #define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg)) |
92 | 92 | ||
93 | /* Read I/O functions */ | 93 | /* Read I/O functions */ |
94 | #define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg)) | 94 | #define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg)) |
95 | #define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg)) | 95 | #define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg)) |
96 | #define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg)) | 96 | #define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg)) |
97 | 97 | ||
98 | /* Set PCI config bits */ | 98 | /* Set PCI config bits */ |
99 | #define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000) | 99 | #define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000) |
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 70c1999a0ec4..17811e5d287b 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c | |||
@@ -44,25 +44,25 @@ static int __init __area_sdram_check(struct pci_channel *chan, | |||
44 | return 1; | 44 | return 1; |
45 | } | 45 | } |
46 | 46 | ||
47 | static struct resource sh7751_io_resource = { | 47 | static struct resource sh7751_pci_resources[] = { |
48 | .name = "SH7751_IO", | 48 | { |
49 | .start = SH7751_PCI_IO_BASE, | 49 | .name = "SH7751_IO", |
50 | .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, | 50 | .start = SH7751_PCI_IO_BASE, |
51 | .flags = IORESOURCE_IO | 51 | .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, |
52 | }; | 52 | .flags = IORESOURCE_IO |
53 | 53 | }, { | |
54 | static struct resource sh7751_mem_resource = { | 54 | .name = "SH7751_mem", |
55 | .name = "SH7751_mem", | 55 | .start = SH7751_PCI_MEMORY_BASE, |
56 | .start = SH7751_PCI_MEMORY_BASE, | 56 | .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, |
57 | .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, | 57 | .flags = IORESOURCE_MEM |
58 | .flags = IORESOURCE_MEM | 58 | }, |
59 | }; | 59 | }; |
60 | 60 | ||
61 | static struct pci_channel sh7751_pci_controller = { | 61 | static struct pci_channel sh7751_pci_controller = { |
62 | .pci_ops = &sh4_pci_ops, | 62 | .pci_ops = &sh4_pci_ops, |
63 | .mem_resource = &sh7751_mem_resource, | 63 | .resources = sh7751_pci_resources, |
64 | .nr_resources = ARRAY_SIZE(sh7751_pci_resources), | ||
64 | .mem_offset = 0x00000000, | 65 | .mem_offset = 0x00000000, |
65 | .io_resource = &sh7751_io_resource, | ||
66 | .io_offset = 0x00000000, | 66 | .io_offset = 0x00000000, |
67 | .io_map_base = SH7751_PCI_IO_BASE, | 67 | .io_map_base = SH7751_PCI_IO_BASE, |
68 | }; | 68 | }; |
@@ -79,7 +79,6 @@ static int __init sh7751_pci_init(void) | |||
79 | struct pci_channel *chan = &sh7751_pci_controller; | 79 | struct pci_channel *chan = &sh7751_pci_controller; |
80 | unsigned int id; | 80 | unsigned int id; |
81 | u32 word, reg; | 81 | u32 word, reg; |
82 | int ret; | ||
83 | 82 | ||
84 | printk(KERN_NOTICE "PCI: Starting intialization.\n"); | 83 | printk(KERN_NOTICE "PCI: Starting intialization.\n"); |
85 | 84 | ||
@@ -93,13 +92,10 @@ static int __init sh7751_pci_init(void) | |||
93 | return -ENODEV; | 92 | return -ENODEV; |
94 | } | 93 | } |
95 | 94 | ||
96 | if ((ret = sh4_pci_check_direct(chan)) != 0) | ||
97 | return ret; | ||
98 | |||
99 | /* Set the BCR's to enable PCI access */ | 95 | /* Set the BCR's to enable PCI access */ |
100 | reg = ctrl_inl(SH7751_BCR1); | 96 | reg = __raw_readl(SH7751_BCR1); |
101 | reg |= 0x80000; | 97 | reg |= 0x80000; |
102 | ctrl_outl(reg, SH7751_BCR1); | 98 | __raw_writel(reg, SH7751_BCR1); |
103 | 99 | ||
104 | /* Turn the clocks back on (not done in reset)*/ | 100 | /* Turn the clocks back on (not done in reset)*/ |
105 | pci_write_reg(chan, 0, SH4_PCICLKR); | 101 | pci_write_reg(chan, 0, SH4_PCICLKR); |
@@ -132,13 +128,13 @@ static int __init sh7751_pci_init(void) | |||
132 | /* Set the local 16MB PCI memory space window to | 128 | /* Set the local 16MB PCI memory space window to |
133 | * the lowest PCI mapped address | 129 | * the lowest PCI mapped address |
134 | */ | 130 | */ |
135 | word = chan->mem_resource->start & SH4_PCIMBR_MASK; | 131 | word = chan->resources[1].start & SH4_PCIMBR_MASK; |
136 | pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); | 132 | pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); |
137 | pci_write_reg(chan, word , SH4_PCIMBR); | 133 | pci_write_reg(chan, word , SH4_PCIMBR); |
138 | 134 | ||
139 | /* Make sure the MSB's of IO window are set to access PCI space | 135 | /* Make sure the MSB's of IO window are set to access PCI space |
140 | * correctly */ | 136 | * correctly */ |
141 | word = chan->io_resource->start & SH4_PCIIOBR_MASK; | 137 | word = chan->resources[0].start & SH4_PCIIOBR_MASK; |
142 | pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); | 138 | pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); |
143 | pci_write_reg(chan, word, SH4_PCIIOBR); | 139 | pci_write_reg(chan, word, SH4_PCIIOBR); |
144 | 140 | ||
@@ -159,13 +155,13 @@ static int __init sh7751_pci_init(void) | |||
159 | return -1; | 155 | return -1; |
160 | 156 | ||
161 | /* configure the wait control registers */ | 157 | /* configure the wait control registers */ |
162 | word = ctrl_inl(SH7751_WCR1); | 158 | word = __raw_readl(SH7751_WCR1); |
163 | pci_write_reg(chan, word, SH4_PCIWCR1); | 159 | pci_write_reg(chan, word, SH4_PCIWCR1); |
164 | word = ctrl_inl(SH7751_WCR2); | 160 | word = __raw_readl(SH7751_WCR2); |
165 | pci_write_reg(chan, word, SH4_PCIWCR2); | 161 | pci_write_reg(chan, word, SH4_PCIWCR2); |
166 | word = ctrl_inl(SH7751_WCR3); | 162 | word = __raw_readl(SH7751_WCR3); |
167 | pci_write_reg(chan, word, SH4_PCIWCR3); | 163 | pci_write_reg(chan, word, SH4_PCIWCR3); |
168 | word = ctrl_inl(SH7751_MCR); | 164 | word = __raw_readl(SH7751_MCR); |
169 | pci_write_reg(chan, word, SH4_PCIMCR); | 165 | pci_write_reg(chan, word, SH4_PCIMCR); |
170 | 166 | ||
171 | /* NOTE: I'm ignoring the PCI error IRQs for now.. | 167 | /* NOTE: I'm ignoring the PCI error IRQs for now.. |
@@ -180,8 +176,6 @@ static int __init sh7751_pci_init(void) | |||
180 | word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; | 176 | word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; |
181 | pci_write_reg(chan, word, SH4_PCICR); | 177 | pci_write_reg(chan, word, SH4_PCICR); |
182 | 178 | ||
183 | register_pci_controller(chan); | 179 | return register_pci_controller(chan); |
184 | |||
185 | return 0; | ||
186 | } | 180 | } |
187 | arch_initcall(sh7751_pci_init); | 181 | arch_initcall(sh7751_pci_init); |
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 323b92d565fe..ffdcbf10b95e 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * Low-Level PCI Support for the SH7780 | 2 | * Low-Level PCI Support for the SH7780 |
3 | * | 3 | * |
4 | * Copyright (C) 2005 - 2009 Paul Mundt | 4 | * Copyright (C) 2005 - 2010 Paul Mundt |
5 | * | 5 | * |
6 | * This file is subject to the terms and conditions of the GNU General Public | 6 | * This file is subject to the terms and conditions of the GNU General Public |
7 | * License. See the file "COPYING" in the main directory of this archive | 7 | * License. See the file "COPYING" in the main directory of this archive |
@@ -11,52 +11,240 @@ | |||
11 | #include <linux/kernel.h> | 11 | #include <linux/kernel.h> |
12 | #include <linux/init.h> | 12 | #include <linux/init.h> |
13 | #include <linux/pci.h> | 13 | #include <linux/pci.h> |
14 | #include <linux/interrupt.h> | ||
15 | #include <linux/timer.h> | ||
16 | #include <linux/irq.h> | ||
14 | #include <linux/errno.h> | 17 | #include <linux/errno.h> |
15 | #include <linux/delay.h> | 18 | #include <linux/delay.h> |
19 | #include <linux/log2.h> | ||
16 | #include "pci-sh4.h" | 20 | #include "pci-sh4.h" |
21 | #include <asm/mmu.h> | ||
22 | #include <asm/sizes.h> | ||
17 | 23 | ||
18 | static struct resource sh7785_io_resource = { | 24 | static struct resource sh7785_pci_resources[] = { |
19 | .name = "SH7785_IO", | 25 | { |
20 | .start = SH7780_PCI_IO_BASE, | 26 | .name = "PCI IO", |
21 | .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, | 27 | .start = 0x1000, |
22 | .flags = IORESOURCE_IO | 28 | .end = SZ_4M - 1, |
23 | }; | 29 | .flags = IORESOURCE_IO, |
24 | 30 | }, { | |
25 | static struct resource sh7785_mem_resource = { | 31 | .name = "PCI MEM 0", |
26 | .name = "SH7785_mem", | 32 | .start = 0xfd000000, |
27 | .start = SH7780_PCI_MEMORY_BASE, | 33 | .end = 0xfd000000 + SZ_16M - 1, |
28 | .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, | 34 | .flags = IORESOURCE_MEM, |
29 | .flags = IORESOURCE_MEM | 35 | }, { |
36 | .name = "PCI MEM 1", | ||
37 | .start = 0x10000000, | ||
38 | .end = 0x10000000 + SZ_64M - 1, | ||
39 | .flags = IORESOURCE_MEM, | ||
40 | }, { | ||
41 | /* | ||
42 | * 32-bit only resources must be last. | ||
43 | */ | ||
44 | .name = "PCI MEM 2", | ||
45 | .start = 0xc0000000, | ||
46 | .end = 0xc0000000 + SZ_512M - 1, | ||
47 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, | ||
48 | }, | ||
30 | }; | 49 | }; |
31 | 50 | ||
32 | static struct pci_channel sh7780_pci_controller = { | 51 | static struct pci_channel sh7780_pci_controller = { |
33 | .pci_ops = &sh4_pci_ops, | 52 | .pci_ops = &sh4_pci_ops, |
34 | .mem_resource = &sh7785_mem_resource, | 53 | .resources = sh7785_pci_resources, |
35 | .mem_offset = 0x00000000, | 54 | .nr_resources = ARRAY_SIZE(sh7785_pci_resources), |
36 | .io_resource = &sh7785_io_resource, | 55 | .io_offset = 0, |
37 | .io_offset = 0x00000000, | 56 | .mem_offset = 0, |
38 | .io_map_base = SH7780_PCI_IO_BASE, | 57 | .io_map_base = 0xfe200000, |
58 | .serr_irq = evt2irq(0xa00), | ||
59 | .err_irq = evt2irq(0xaa0), | ||
39 | }; | 60 | }; |
40 | 61 | ||
41 | static struct sh4_pci_address_map sh7780_pci_map = { | 62 | struct pci_errors { |
42 | .window0 = { | 63 | unsigned int mask; |
43 | #if defined(CONFIG_32BIT) | 64 | const char *str; |
44 | .base = SH7780_32BIT_DDR_BASE_ADDR, | 65 | } pci_arbiter_errors[] = { |
45 | .size = 0x40000000, | 66 | { SH4_PCIAINT_MBKN, "master broken" }, |
46 | #else | 67 | { SH4_PCIAINT_TBTO, "target bus time out" }, |
47 | .base = SH7780_CS0_BASE_ADDR, | 68 | { SH4_PCIAINT_MBTO, "master bus time out" }, |
48 | .size = 0x20000000, | 69 | { SH4_PCIAINT_TABT, "target abort" }, |
49 | #endif | 70 | { SH4_PCIAINT_MABT, "master abort" }, |
50 | }, | 71 | { SH4_PCIAINT_RDPE, "read data parity error" }, |
72 | { SH4_PCIAINT_WDPE, "write data parity error" }, | ||
73 | }, pci_interrupt_errors[] = { | ||
74 | { SH4_PCIINT_MLCK, "master lock error" }, | ||
75 | { SH4_PCIINT_TABT, "target-target abort" }, | ||
76 | { SH4_PCIINT_TRET, "target retry time out" }, | ||
77 | { SH4_PCIINT_MFDE, "master function disable erorr" }, | ||
78 | { SH4_PCIINT_PRTY, "address parity error" }, | ||
79 | { SH4_PCIINT_SERR, "SERR" }, | ||
80 | { SH4_PCIINT_TWDP, "data parity error for target write" }, | ||
81 | { SH4_PCIINT_TRDP, "PERR detected for target read" }, | ||
82 | { SH4_PCIINT_MTABT, "target abort for master" }, | ||
83 | { SH4_PCIINT_MMABT, "master abort for master" }, | ||
84 | { SH4_PCIINT_MWPD, "master write data parity error" }, | ||
85 | { SH4_PCIINT_MRPD, "master read data parity error" }, | ||
51 | }; | 86 | }; |
52 | 87 | ||
88 | static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id) | ||
89 | { | ||
90 | struct pci_channel *hose = dev_id; | ||
91 | unsigned long addr; | ||
92 | unsigned int status; | ||
93 | unsigned int cmd; | ||
94 | int i; | ||
95 | |||
96 | addr = __raw_readl(hose->reg_base + SH4_PCIALR); | ||
97 | |||
98 | /* | ||
99 | * Handle status errors. | ||
100 | */ | ||
101 | status = __raw_readw(hose->reg_base + PCI_STATUS); | ||
102 | if (status & (PCI_STATUS_PARITY | | ||
103 | PCI_STATUS_DETECTED_PARITY | | ||
104 | PCI_STATUS_SIG_TARGET_ABORT | | ||
105 | PCI_STATUS_REC_TARGET_ABORT | | ||
106 | PCI_STATUS_REC_MASTER_ABORT)) { | ||
107 | cmd = pcibios_handle_status_errors(addr, status, hose); | ||
108 | if (likely(cmd)) | ||
109 | __raw_writew(cmd, hose->reg_base + PCI_STATUS); | ||
110 | } | ||
111 | |||
112 | /* | ||
113 | * Handle arbiter errors. | ||
114 | */ | ||
115 | status = __raw_readl(hose->reg_base + SH4_PCIAINT); | ||
116 | for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) { | ||
117 | if (status & pci_arbiter_errors[i].mask) { | ||
118 | printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", | ||
119 | pci_arbiter_errors[i].str, addr); | ||
120 | cmd |= pci_arbiter_errors[i].mask; | ||
121 | } | ||
122 | } | ||
123 | __raw_writel(cmd, hose->reg_base + SH4_PCIAINT); | ||
124 | |||
125 | /* | ||
126 | * Handle the remaining PCI errors. | ||
127 | */ | ||
128 | status = __raw_readl(hose->reg_base + SH4_PCIINT); | ||
129 | for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) { | ||
130 | if (status & pci_interrupt_errors[i].mask) { | ||
131 | printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", | ||
132 | pci_interrupt_errors[i].str, addr); | ||
133 | cmd |= pci_interrupt_errors[i].mask; | ||
134 | } | ||
135 | } | ||
136 | __raw_writel(cmd, hose->reg_base + SH4_PCIINT); | ||
137 | |||
138 | return IRQ_HANDLED; | ||
139 | } | ||
140 | |||
141 | static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id) | ||
142 | { | ||
143 | struct pci_channel *hose = dev_id; | ||
144 | |||
145 | printk(KERN_DEBUG "PCI: system error received: "); | ||
146 | pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); | ||
147 | printk("\n"); | ||
148 | |||
149 | /* Deassert SERR */ | ||
150 | __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM); | ||
151 | |||
152 | /* Back off the IRQ for awhile */ | ||
153 | disable_irq_nosync(irq); | ||
154 | hose->serr_timer.expires = jiffies + HZ; | ||
155 | add_timer(&hose->serr_timer); | ||
156 | |||
157 | return IRQ_HANDLED; | ||
158 | } | ||
159 | |||
160 | static int __init sh7780_pci_setup_irqs(struct pci_channel *hose) | ||
161 | { | ||
162 | int ret; | ||
163 | |||
164 | /* Clear out PCI arbiter IRQs */ | ||
165 | __raw_writel(0, hose->reg_base + SH4_PCIAINT); | ||
166 | |||
167 | /* Clear all error conditions */ | ||
168 | __raw_writew(PCI_STATUS_DETECTED_PARITY | \ | ||
169 | PCI_STATUS_SIG_SYSTEM_ERROR | \ | ||
170 | PCI_STATUS_REC_MASTER_ABORT | \ | ||
171 | PCI_STATUS_REC_TARGET_ABORT | \ | ||
172 | PCI_STATUS_SIG_TARGET_ABORT | \ | ||
173 | PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS); | ||
174 | |||
175 | ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED, | ||
176 | "PCI SERR interrupt", hose); | ||
177 | if (unlikely(ret)) { | ||
178 | printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n"); | ||
179 | return ret; | ||
180 | } | ||
181 | |||
182 | /* | ||
183 | * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power | ||
184 | * down IRQ vectors are routed through the ERR IRQ vector. We | ||
185 | * only request_irq() once as there is only a single masking | ||
186 | * source for multiple events. | ||
187 | */ | ||
188 | ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED, | ||
189 | "PCI ERR interrupt", hose); | ||
190 | if (unlikely(ret)) { | ||
191 | free_irq(hose->serr_irq, hose); | ||
192 | return ret; | ||
193 | } | ||
194 | |||
195 | /* Unmask all of the arbiter IRQs. */ | ||
196 | __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \ | ||
197 | SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \ | ||
198 | SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM); | ||
199 | |||
200 | /* Unmask all of the PCI IRQs */ | ||
201 | __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \ | ||
202 | SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \ | ||
203 | SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \ | ||
204 | SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \ | ||
205 | SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \ | ||
206 | SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM); | ||
207 | |||
208 | return ret; | ||
209 | } | ||
210 | |||
211 | static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose) | ||
212 | { | ||
213 | free_irq(hose->err_irq, hose); | ||
214 | free_irq(hose->serr_irq, hose); | ||
215 | } | ||
216 | |||
217 | static void __init sh7780_pci66_init(struct pci_channel *hose) | ||
218 | { | ||
219 | unsigned int tmp; | ||
220 | |||
221 | if (!pci_is_66mhz_capable(hose, 0, 0)) | ||
222 | return; | ||
223 | |||
224 | /* Enable register access */ | ||
225 | tmp = __raw_readl(hose->reg_base + SH4_PCICR); | ||
226 | tmp |= SH4_PCICR_PREFIX; | ||
227 | __raw_writel(tmp, hose->reg_base + SH4_PCICR); | ||
228 | |||
229 | /* Enable 66MHz operation */ | ||
230 | tmp = __raw_readw(hose->reg_base + PCI_STATUS); | ||
231 | tmp |= PCI_STATUS_66MHZ; | ||
232 | __raw_writew(tmp, hose->reg_base + PCI_STATUS); | ||
233 | |||
234 | /* Done */ | ||
235 | tmp = __raw_readl(hose->reg_base + SH4_PCICR); | ||
236 | tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN; | ||
237 | __raw_writel(tmp, hose->reg_base + SH4_PCICR); | ||
238 | } | ||
239 | |||
53 | static int __init sh7780_pci_init(void) | 240 | static int __init sh7780_pci_init(void) |
54 | { | 241 | { |
55 | struct pci_channel *chan = &sh7780_pci_controller; | 242 | struct pci_channel *chan = &sh7780_pci_controller; |
243 | phys_addr_t memphys; | ||
244 | size_t memsize; | ||
56 | unsigned int id; | 245 | unsigned int id; |
57 | const char *type = NULL; | 246 | const char *type; |
58 | int ret; | 247 | int ret, i; |
59 | u32 word; | ||
60 | 248 | ||
61 | printk(KERN_NOTICE "PCI: Starting intialization.\n"); | 249 | printk(KERN_NOTICE "PCI: Starting intialization.\n"); |
62 | 250 | ||
@@ -65,17 +253,28 @@ static int __init sh7780_pci_init(void) | |||
65 | /* Enable CPU access to the PCIC registers. */ | 253 | /* Enable CPU access to the PCIC registers. */ |
66 | __raw_writel(PCIECR_ENBL, PCIECR); | 254 | __raw_writel(PCIECR_ENBL, PCIECR); |
67 | 255 | ||
68 | id = __raw_readw(chan->reg_base + SH7780_PCIVID); | 256 | /* Reset */ |
69 | if (id != SH7780_VENDOR_ID) { | 257 | __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST, |
258 | chan->reg_base + SH4_PCICR); | ||
259 | |||
260 | /* | ||
261 | * Wait for it to come back up. The spec says to allow for up to | ||
262 | * 1 second after toggling the reset pin, but in practice 100ms | ||
263 | * is more than enough. | ||
264 | */ | ||
265 | mdelay(100); | ||
266 | |||
267 | id = __raw_readw(chan->reg_base + PCI_VENDOR_ID); | ||
268 | if (id != PCI_VENDOR_ID_RENESAS) { | ||
70 | printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); | 269 | printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); |
71 | return -ENODEV; | 270 | return -ENODEV; |
72 | } | 271 | } |
73 | 272 | ||
74 | id = __raw_readw(chan->reg_base + SH7780_PCIDID); | 273 | id = __raw_readw(chan->reg_base + PCI_DEVICE_ID); |
75 | type = (id == SH7763_DEVICE_ID) ? "SH7763" : | 274 | type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" : |
76 | (id == SH7780_DEVICE_ID) ? "SH7780" : | 275 | (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" : |
77 | (id == SH7781_DEVICE_ID) ? "SH7781" : | 276 | (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" : |
78 | (id == SH7785_DEVICE_ID) ? "SH7785" : | 277 | (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" : |
79 | NULL; | 278 | NULL; |
80 | if (unlikely(!type)) { | 279 | if (unlikely(!type)) { |
81 | printk(KERN_ERR "PCI: Found an unsupported Renesas host " | 280 | printk(KERN_ERR "PCI: Found an unsupported Renesas host " |
@@ -85,62 +284,119 @@ static int __init sh7780_pci_init(void) | |||
85 | 284 | ||
86 | printk(KERN_NOTICE "PCI: Found a Renesas %s host " | 285 | printk(KERN_NOTICE "PCI: Found a Renesas %s host " |
87 | "controller, revision %d.\n", type, | 286 | "controller, revision %d.\n", type, |
88 | __raw_readb(chan->reg_base + SH7780_PCIRID)); | 287 | __raw_readb(chan->reg_base + PCI_REVISION_ID)); |
89 | 288 | ||
90 | if ((ret = sh4_pci_check_direct(chan)) != 0) | 289 | /* |
290 | * Now throw it in to register initialization mode and | ||
291 | * start the real work. | ||
292 | */ | ||
293 | __raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR); | ||
294 | |||
295 | memphys = __pa(memory_start); | ||
296 | memsize = roundup_pow_of_two(memory_end - memory_start); | ||
297 | |||
298 | /* | ||
299 | * If there's more than 512MB of memory, we need to roll over to | ||
300 | * LAR1/LSR1. | ||
301 | */ | ||
302 | if (memsize > SZ_512M) { | ||
303 | __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1); | ||
304 | __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1, | ||
305 | chan->reg_base + SH4_PCILSR1); | ||
306 | memsize = SZ_512M; | ||
307 | } else { | ||
308 | /* | ||
309 | * Otherwise just zero it out and disable it. | ||
310 | */ | ||
311 | __raw_writel(0, chan->reg_base + SH4_PCILAR1); | ||
312 | __raw_writel(0, chan->reg_base + SH4_PCILSR1); | ||
313 | } | ||
314 | |||
315 | /* | ||
316 | * LAR0/LSR0 covers up to the first 512MB, which is enough to | ||
317 | * cover all of lowmem on most platforms. | ||
318 | */ | ||
319 | __raw_writel(memphys, chan->reg_base + SH4_PCILAR0); | ||
320 | __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1, | ||
321 | chan->reg_base + SH4_PCILSR0); | ||
322 | |||
323 | /* | ||
324 | * Hook up the ERR and SERR IRQs. | ||
325 | */ | ||
326 | ret = sh7780_pci_setup_irqs(chan); | ||
327 | if (unlikely(ret)) | ||
91 | return ret; | 328 | return ret; |
92 | 329 | ||
93 | /* | 330 | /* |
94 | * Set the class and sub-class codes. | 331 | * Disable the cache snoop controller for non-coherent DMA. |
95 | */ | 332 | */ |
96 | __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, | 333 | __raw_writel(0, chan->reg_base + SH7780_PCICSCR0); |
97 | chan->reg_base + SH7780_PCIBCC); | 334 | __raw_writel(0, chan->reg_base + SH7780_PCICSAR0); |
98 | __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff, | 335 | __raw_writel(0, chan->reg_base + SH7780_PCICSCR1); |
99 | chan->reg_base + SH7780_PCISUB); | 336 | __raw_writel(0, chan->reg_base + SH7780_PCICSAR1); |
100 | 337 | ||
101 | /* | 338 | /* |
102 | * Set IO and Mem windows to local address | 339 | * Setup the memory BARs |
103 | * Make PCI and local address the same for easy 1 to 1 mapping | ||
104 | */ | 340 | */ |
105 | pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0); | 341 | for (i = 1; i < chan->nr_resources; i++) { |
106 | /* Set the values on window 0 PCI config registers */ | 342 | struct resource *res = chan->resources + i; |
107 | pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0); | 343 | resource_size_t size; |
108 | pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0); | ||
109 | 344 | ||
110 | pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); | 345 | if (unlikely(res->flags & IORESOURCE_IO)) |
346 | continue; | ||
111 | 347 | ||
112 | /* Set up standard PCI config registers */ | 348 | /* |
113 | __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS); | 349 | * Make sure we're in the right physical addressing mode |
114 | __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD); | 350 | * for dealing with the resource. |
115 | __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID); | 351 | */ |
116 | __raw_writew(0x0001, chan->reg_base + SH7780_PCISID); | 352 | if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) { |
353 | chan->nr_resources--; | ||
354 | continue; | ||
355 | } | ||
117 | 356 | ||
118 | __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF); | 357 | size = resource_size(res); |
358 | |||
359 | /* | ||
360 | * The MBMR mask is calculated in units of 256kB, which | ||
361 | * keeps things pretty simple. | ||
362 | */ | ||
363 | __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18, | ||
364 | chan->reg_base + SH7780_PCIMBMR(i - 1)); | ||
365 | __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1)); | ||
366 | } | ||
119 | 367 | ||
120 | /* Apply any last-minute PCIC fixups */ | 368 | /* |
121 | pci_fixup_pcic(chan); | 369 | * And I/O. |
370 | */ | ||
371 | __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0); | ||
372 | __raw_writel(0, chan->reg_base + SH7780_PCIIOBR); | ||
373 | __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR); | ||
122 | 374 | ||
123 | pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); | 375 | __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \ |
124 | pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); | 376 | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \ |
377 | PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND); | ||
125 | 378 | ||
126 | #ifdef CONFIG_32BIT | 379 | /* |
127 | pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); | 380 | * Initialization mode complete, release the control register and |
128 | pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); | 381 | * enable round robin mode to stop device overruns/starvation. |
129 | #endif | 382 | */ |
383 | __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO, | ||
384 | chan->reg_base + SH4_PCICR); | ||
130 | 385 | ||
131 | /* Set IOBR for windows containing area specified in pci.h */ | 386 | ret = register_pci_controller(chan); |
132 | pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), | 387 | if (unlikely(ret)) |
133 | SH7780_PCIIOBR); | 388 | goto err; |
134 | pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), | ||
135 | SH7780_PCIIOBMR); | ||
136 | 389 | ||
137 | /* SH7780 init done, set central function init complete */ | 390 | sh7780_pci66_init(chan); |
138 | /* use round robin mode to stop a device starving/overruning */ | ||
139 | word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; | ||
140 | pci_write_reg(chan, word, SH4_PCICR); | ||
141 | 391 | ||
142 | register_pci_controller(chan); | 392 | printk(KERN_NOTICE "PCI: Running at %dMHz.\n", |
393 | (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ? | ||
394 | 66 : 33); | ||
143 | 395 | ||
144 | return 0; | 396 | return 0; |
397 | |||
398 | err: | ||
399 | sh7780_pci_teardown_irqs(chan); | ||
400 | return ret; | ||
145 | } | 401 | } |
146 | arch_initcall(sh7780_pci_init); | 402 | arch_initcall(sh7780_pci_init); |
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 4a52478c97cf..205dcbefe275 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h | |||
@@ -12,12 +12,11 @@ | |||
12 | #ifndef _PCI_SH7780_H_ | 12 | #ifndef _PCI_SH7780_H_ |
13 | #define _PCI_SH7780_H_ | 13 | #define _PCI_SH7780_H_ |
14 | 14 | ||
15 | /* Platform Specific Values */ | 15 | #define PCI_VENDOR_ID_RENESAS 0x1912 |
16 | #define SH7780_VENDOR_ID 0x1912 | 16 | #define PCI_DEVICE_ID_RENESAS_SH7781 0x0001 |
17 | #define SH7781_DEVICE_ID 0x0001 | 17 | #define PCI_DEVICE_ID_RENESAS_SH7780 0x0002 |
18 | #define SH7780_DEVICE_ID 0x0002 | 18 | #define PCI_DEVICE_ID_RENESAS_SH7763 0x0004 |
19 | #define SH7763_DEVICE_ID 0x0004 | 19 | #define PCI_DEVICE_ID_RENESAS_SH7785 0x0007 |
20 | #define SH7785_DEVICE_ID 0x0007 | ||
21 | 20 | ||
22 | /* SH7780 Control Registers */ | 21 | /* SH7780 Control Registers */ |
23 | #define PCIECR 0xFE000008 | 22 | #define PCIECR 0xFE000008 |
@@ -27,44 +26,9 @@ | |||
27 | #define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ | 26 | #define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ |
28 | #define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */ | 27 | #define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */ |
29 | 28 | ||
30 | #define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */ | ||
31 | #define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ | ||
32 | |||
33 | #define SH7780_PCI_IO_BASE 0xFE200000 /* IO space base address */ | ||
34 | #define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */ | ||
35 | |||
36 | #define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ | 29 | #define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ |
37 | 30 | ||
38 | /* SH7780 PCI Config Registers */ | 31 | /* SH7780 PCI Config Registers */ |
39 | #define SH7780_PCIVID 0x000 /* Vendor ID */ | ||
40 | #define SH7780_PCIDID 0x002 /* Device ID */ | ||
41 | #define SH7780_PCICMD 0x004 /* Command */ | ||
42 | #define SH7780_PCISTATUS 0x006 /* Status */ | ||
43 | #define SH7780_PCIRID 0x008 /* Revision ID */ | ||
44 | #define SH7780_PCIPIF 0x009 /* Program Interface */ | ||
45 | #define SH7780_PCISUB 0x00a /* Sub class code */ | ||
46 | #define SH7780_PCIBCC 0x00b /* Base class code */ | ||
47 | #define SH7780_PCICLS 0x00c /* Cache line size */ | ||
48 | #define SH7780_PCILTM 0x00d /* latency timer */ | ||
49 | #define SH7780_PCIHDR 0x00e /* Header type */ | ||
50 | #define SH7780_PCIBIST 0x00f /* BIST */ | ||
51 | #define SH7780_PCIIBAR 0x010 /* IO Base address */ | ||
52 | #define SH7780_PCIMBAR0 0x014 /* Memory base address0 */ | ||
53 | #define SH7780_PCIMBAR1 0x018 /* Memory base address1 */ | ||
54 | #define SH7780_PCISVID 0x02c /* Sub system vendor ID */ | ||
55 | #define SH7780_PCISID 0x02e /* Sub system ID */ | ||
56 | #define SH7780_PCICP 0x034 | ||
57 | #define SH7780_PCIINTLINE 0x03c /* Interrupt line */ | ||
58 | #define SH7780_PCIINTPIN 0x03d /* Interrupt pin */ | ||
59 | #define SH7780_PCIMINGNT 0x03e /* Minumum grand */ | ||
60 | #define SH7780_PCIMAXLAT 0x03f /* Maxmum latency */ | ||
61 | #define SH7780_PCICID 0x040 | ||
62 | #define SH7780_PCINIP 0x041 | ||
63 | #define SH7780_PCIPMC 0x042 | ||
64 | #define SH7780_PCIPMCSR 0x044 | ||
65 | #define SH7780_PCIPMCSR_BSE 0x046 | ||
66 | #define SH7780_PCICDD 0x047 | ||
67 | |||
68 | #define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ | 32 | #define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ |
69 | #define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ | 33 | #define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ |
70 | #define SH7780_PCIAIR 0x11C /* Error Address Register */ | 34 | #define SH7780_PCIAIR 0x11C /* Error Address Register */ |
@@ -76,10 +40,8 @@ | |||
76 | #define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ | 40 | #define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ |
77 | #define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ | 41 | #define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ |
78 | 42 | ||
79 | #define SH7780_PCIMBR0 0x1E0 | 43 | #define SH7780_PCIMBR(x) (0x1E0 + ((x) * 8)) |
80 | #define SH7780_PCIMBMR0 0x1E4 | 44 | #define SH7780_PCIMBMR(x) (0x1E4 + ((x) * 8)) |
81 | #define SH7780_PCIMBR2 0x1F0 | ||
82 | #define SH7780_PCIMBMR2 0x1F4 | ||
83 | #define SH7780_PCIIOBR 0x1F8 | 45 | #define SH7780_PCIIOBR 0x1F8 |
84 | #define SH7780_PCIIOBMR 0x1FC | 46 | #define SH7780_PCIIOBMR 0x1FC |
85 | #define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */ | 47 | #define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */ |
@@ -87,16 +49,4 @@ | |||
87 | #define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */ | 49 | #define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */ |
88 | #define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */ | 50 | #define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */ |
89 | 51 | ||
90 | /* General Memory Config Addresses */ | ||
91 | #define SH7780_CS0_BASE_ADDR 0x0 | ||
92 | #define SH7780_MEM_REGION_SIZE 0x04000000 | ||
93 | #define SH7780_CS1_BASE_ADDR (SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE) | ||
94 | #define SH7780_CS2_BASE_ADDR (SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE) | ||
95 | #define SH7780_CS3_BASE_ADDR (SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE) | ||
96 | #define SH7780_CS4_BASE_ADDR (SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE) | ||
97 | #define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE) | ||
98 | #define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE) | ||
99 | |||
100 | #define SH7780_32BIT_DDR_BASE_ADDR 0x40000000 | ||
101 | |||
102 | #endif /* _PCI_SH7780_H_ */ | 52 | #endif /* _PCI_SH7780_H_ */ |
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 96213fd172ce..953af139e230 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c | |||
@@ -33,15 +33,22 @@ static int pci_initialized; | |||
33 | static void __devinit pcibios_scanbus(struct pci_channel *hose) | 33 | static void __devinit pcibios_scanbus(struct pci_channel *hose) |
34 | { | 34 | { |
35 | static int next_busno; | 35 | static int next_busno; |
36 | static int need_domain_info; | ||
36 | struct pci_bus *bus; | 37 | struct pci_bus *bus; |
37 | 38 | ||
38 | bus = pci_scan_bus(next_busno, hose->pci_ops, hose); | 39 | bus = pci_scan_bus(next_busno, hose->pci_ops, hose); |
40 | hose->bus = bus; | ||
41 | |||
42 | need_domain_info = need_domain_info || hose->index; | ||
43 | hose->need_domain_info = need_domain_info; | ||
39 | if (bus) { | 44 | if (bus) { |
40 | next_busno = bus->subordinate + 1; | 45 | next_busno = bus->subordinate + 1; |
41 | /* Don't allow 8-bit bus number overflow inside the hose - | 46 | /* Don't allow 8-bit bus number overflow inside the hose - |
42 | reserve some space for bridges. */ | 47 | reserve some space for bridges. */ |
43 | if (next_busno > 224) | 48 | if (next_busno > 224) { |
44 | next_busno = 0; | 49 | next_busno = 0; |
50 | need_domain_info = 1; | ||
51 | } | ||
45 | 52 | ||
46 | pci_bus_size_bridges(bus); | 53 | pci_bus_size_bridges(bus); |
47 | pci_bus_assign_resources(bus); | 54 | pci_bus_assign_resources(bus); |
@@ -51,10 +58,21 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose) | |||
51 | 58 | ||
52 | static DEFINE_MUTEX(pci_scan_mutex); | 59 | static DEFINE_MUTEX(pci_scan_mutex); |
53 | 60 | ||
54 | void __devinit register_pci_controller(struct pci_channel *hose) | 61 | int __devinit register_pci_controller(struct pci_channel *hose) |
55 | { | 62 | { |
56 | request_resource(&iomem_resource, hose->mem_resource); | 63 | int i; |
57 | request_resource(&ioport_resource, hose->io_resource); | 64 | |
65 | for (i = 0; i < hose->nr_resources; i++) { | ||
66 | struct resource *res = hose->resources + i; | ||
67 | |||
68 | if (res->flags & IORESOURCE_IO) { | ||
69 | if (request_resource(&ioport_resource, res) < 0) | ||
70 | goto out; | ||
71 | } else { | ||
72 | if (request_resource(&iomem_resource, res) < 0) | ||
73 | goto out; | ||
74 | } | ||
75 | } | ||
58 | 76 | ||
59 | *hose_tail = hose; | 77 | *hose_tail = hose; |
60 | hose_tail = &hose->next; | 78 | hose_tail = &hose->next; |
@@ -68,6 +86,11 @@ void __devinit register_pci_controller(struct pci_channel *hose) | |||
68 | } | 86 | } |
69 | 87 | ||
70 | /* | 88 | /* |
89 | * Setup the ERR/PERR and SERR timers, if available. | ||
90 | */ | ||
91 | pcibios_enable_timers(hose); | ||
92 | |||
93 | /* | ||
71 | * Scan the bus if it is register after the PCI subsystem | 94 | * Scan the bus if it is register after the PCI subsystem |
72 | * initialization. | 95 | * initialization. |
73 | */ | 96 | */ |
@@ -76,6 +99,15 @@ void __devinit register_pci_controller(struct pci_channel *hose) | |||
76 | pcibios_scanbus(hose); | 99 | pcibios_scanbus(hose); |
77 | mutex_unlock(&pci_scan_mutex); | 100 | mutex_unlock(&pci_scan_mutex); |
78 | } | 101 | } |
102 | |||
103 | return 0; | ||
104 | |||
105 | out: | ||
106 | for (--i; i >= 0; i--) | ||
107 | release_resource(&hose->resources[i]); | ||
108 | |||
109 | printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n"); | ||
110 | return -1; | ||
79 | } | 111 | } |
80 | 112 | ||
81 | static int __init pcibios_init(void) | 113 | static int __init pcibios_init(void) |
@@ -127,11 +159,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) | |||
127 | { | 159 | { |
128 | struct pci_dev *dev = bus->self; | 160 | struct pci_dev *dev = bus->self; |
129 | struct list_head *ln; | 161 | struct list_head *ln; |
130 | struct pci_channel *chan = bus->sysdata; | 162 | struct pci_channel *hose = bus->sysdata; |
131 | 163 | ||
132 | if (!dev) { | 164 | if (!dev) { |
133 | bus->resource[0] = chan->io_resource; | 165 | int i; |
134 | bus->resource[1] = chan->mem_resource; | 166 | |
167 | for (i = 0; i < hose->nr_resources; i++) | ||
168 | bus->resource[i] = hose->resources + i; | ||
135 | } | 169 | } |
136 | 170 | ||
137 | for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { | 171 | for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { |
@@ -152,30 +186,25 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, | |||
152 | resource_size_t size, resource_size_t align) | 186 | resource_size_t size, resource_size_t align) |
153 | { | 187 | { |
154 | struct pci_dev *dev = data; | 188 | struct pci_dev *dev = data; |
155 | struct pci_channel *chan = dev->sysdata; | 189 | struct pci_channel *hose = dev->sysdata; |
156 | resource_size_t start = res->start; | 190 | resource_size_t start = res->start; |
157 | 191 | ||
158 | if (res->flags & IORESOURCE_IO) { | 192 | if (res->flags & IORESOURCE_IO) { |
159 | if (start < PCIBIOS_MIN_IO + chan->io_resource->start) | 193 | if (start < PCIBIOS_MIN_IO + hose->resources[0].start) |
160 | start = PCIBIOS_MIN_IO + chan->io_resource->start; | 194 | start = PCIBIOS_MIN_IO + hose->resources[0].start; |
161 | 195 | ||
162 | /* | 196 | /* |
163 | * Put everything into 0x00-0xff region modulo 0x400. | 197 | * Put everything into 0x00-0xff region modulo 0x400. |
164 | */ | 198 | */ |
165 | if (start & 0x300) { | 199 | if (start & 0x300) |
166 | start = (start + 0x3ff) & ~0x3ff; | 200 | start = (start + 0x3ff) & ~0x3ff; |
167 | res->start = start; | ||
168 | } | ||
169 | } else if (res->flags & IORESOURCE_MEM) { | ||
170 | if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) | ||
171 | start = PCIBIOS_MIN_MEM + chan->mem_resource->start; | ||
172 | } | 201 | } |
173 | 202 | ||
174 | return start; | 203 | return start; |
175 | } | 204 | } |
176 | 205 | ||
177 | void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, | 206 | void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, |
178 | struct resource *res) | 207 | struct resource *res) |
179 | { | 208 | { |
180 | struct pci_channel *hose = dev->sysdata; | 209 | struct pci_channel *hose = dev->sysdata; |
181 | unsigned long offset = 0; | 210 | unsigned long offset = 0; |
@@ -189,9 +218,8 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, | |||
189 | region->end = res->end - offset; | 218 | region->end = res->end - offset; |
190 | } | 219 | } |
191 | 220 | ||
192 | void __devinit | 221 | void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, |
193 | pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, | 222 | struct pci_bus_region *region) |
194 | struct pci_bus_region *region) | ||
195 | { | 223 | { |
196 | struct pci_channel *hose = dev->sysdata; | 224 | struct pci_channel *hose = dev->sysdata; |
197 | unsigned long offset = 0; | 225 | unsigned long offset = 0; |
@@ -274,6 +302,86 @@ char * __devinit pcibios_setup(char *str) | |||
274 | return str; | 302 | return str; |
275 | } | 303 | } |
276 | 304 | ||
305 | static void __init | ||
306 | pcibios_bus_report_status_early(struct pci_channel *hose, | ||
307 | int top_bus, int current_bus, | ||
308 | unsigned int status_mask, int warn) | ||
309 | { | ||
310 | unsigned int pci_devfn; | ||
311 | u16 status; | ||
312 | int ret; | ||
313 | |||
314 | for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { | ||
315 | if (PCI_FUNC(pci_devfn)) | ||
316 | continue; | ||
317 | ret = early_read_config_word(hose, top_bus, current_bus, | ||
318 | pci_devfn, PCI_STATUS, &status); | ||
319 | if (ret != PCIBIOS_SUCCESSFUL) | ||
320 | continue; | ||
321 | if (status == 0xffff) | ||
322 | continue; | ||
323 | |||
324 | early_write_config_word(hose, top_bus, current_bus, | ||
325 | pci_devfn, PCI_STATUS, | ||
326 | status & status_mask); | ||
327 | if (warn) | ||
328 | printk("(%02x:%02x: %04X) ", current_bus, | ||
329 | pci_devfn, status); | ||
330 | } | ||
331 | } | ||
332 | |||
333 | /* | ||
334 | * We can't use pci_find_device() here since we are | ||
335 | * called from interrupt context. | ||
336 | */ | ||
337 | static void __init_refok | ||
338 | pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask, | ||
339 | int warn) | ||
340 | { | ||
341 | struct pci_dev *dev; | ||
342 | |||
343 | list_for_each_entry(dev, &bus->devices, bus_list) { | ||
344 | u16 status; | ||
345 | |||
346 | /* | ||
347 | * ignore host bridge - we handle | ||
348 | * that separately | ||
349 | */ | ||
350 | if (dev->bus->number == 0 && dev->devfn == 0) | ||
351 | continue; | ||
352 | |||
353 | pci_read_config_word(dev, PCI_STATUS, &status); | ||
354 | if (status == 0xffff) | ||
355 | continue; | ||
356 | |||
357 | if ((status & status_mask) == 0) | ||
358 | continue; | ||
359 | |||
360 | /* clear the status errors */ | ||
361 | pci_write_config_word(dev, PCI_STATUS, status & status_mask); | ||
362 | |||
363 | if (warn) | ||
364 | printk("(%s: %04X) ", pci_name(dev), status); | ||
365 | } | ||
366 | |||
367 | list_for_each_entry(dev, &bus->devices, bus_list) | ||
368 | if (dev->subordinate) | ||
369 | pcibios_bus_report_status(dev->subordinate, status_mask, warn); | ||
370 | } | ||
371 | |||
372 | void __init_refok pcibios_report_status(unsigned int status_mask, int warn) | ||
373 | { | ||
374 | struct pci_channel *hose; | ||
375 | |||
376 | for (hose = hose_head; hose; hose = hose->next) { | ||
377 | if (unlikely(!hose->bus)) | ||
378 | pcibios_bus_report_status_early(hose, hose_head->index, | ||
379 | hose->index, status_mask, warn); | ||
380 | else | ||
381 | pcibios_bus_report_status(hose->bus, status_mask, warn); | ||
382 | } | ||
383 | } | ||
384 | |||
277 | int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, | 385 | int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, |
278 | enum pci_mmap_state mmap_state, int write_combine) | 386 | enum pci_mmap_state mmap_state, int write_combine) |
279 | { | 387 | { |
@@ -302,9 +410,15 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev, | |||
302 | { | 410 | { |
303 | struct pci_channel *chan = dev->sysdata; | 411 | struct pci_channel *chan = dev->sysdata; |
304 | 412 | ||
305 | if (!chan->io_map_base) | 413 | if (unlikely(!chan->io_map_base)) { |
306 | chan->io_map_base = generic_io_base; | 414 | chan->io_map_base = generic_io_base; |
307 | 415 | ||
416 | if (pci_domains_supported) | ||
417 | panic("To avoid data corruption io_map_base MUST be " | ||
418 | "set with multiple PCI domains."); | ||
419 | } | ||
420 | |||
421 | |||
308 | return (void __iomem *)(chan->io_map_base + port); | 422 | return (void __iomem *)(chan->io_map_base + port); |
309 | } | 423 | } |
310 | 424 | ||
@@ -321,20 +435,9 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) | |||
321 | 435 | ||
322 | if (flags & IORESOURCE_IO) | 436 | if (flags & IORESOURCE_IO) |
323 | return ioport_map_pci(dev, start, len); | 437 | return ioport_map_pci(dev, start, len); |
324 | |||
325 | /* | ||
326 | * Presently the IORESOURCE_MEM case is a bit special, most | ||
327 | * SH7751 style PCI controllers have PCI memory at a fixed | ||
328 | * location in the address space where no remapping is desired. | ||
329 | * With the IORESOURCE_MEM case more care has to be taken | ||
330 | * to inhibit page table mapping for legacy cores, but this is | ||
331 | * punted off to __ioremap(). | ||
332 | * -- PFM. | ||
333 | */ | ||
334 | if (flags & IORESOURCE_MEM) { | 438 | if (flags & IORESOURCE_MEM) { |
335 | if (flags & IORESOURCE_CACHEABLE) | 439 | if (flags & IORESOURCE_CACHEABLE) |
336 | return ioremap(start, len); | 440 | return ioremap(start, len); |
337 | |||
338 | return ioremap_nocache(start, len); | 441 | return ioremap_nocache(start, len); |
339 | } | 442 | } |
340 | 443 | ||
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index ac37ee879bab..ae91a2dd9183 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * Low-Level PCI Express Support for the SH7786 | 2 | * Low-Level PCI Express Support for the SH7786 |
3 | * | 3 | * |
4 | * Copyright (C) 2009 Paul Mundt | 4 | * Copyright (C) 2009 - 2010 Paul Mundt |
5 | * | 5 | * |
6 | * This file is subject to the terms and conditions of the GNU General Public | 6 | * This file is subject to the terms and conditions of the GNU General Public |
7 | * License. See the file "COPYING" in the main directory of this archive | 7 | * License. See the file "COPYING" in the main directory of this archive |
@@ -30,60 +30,84 @@ static struct sh7786_pcie_hwops { | |||
30 | int (*port_init_hw)(struct sh7786_pcie_port *port); | 30 | int (*port_init_hw)(struct sh7786_pcie_port *port); |
31 | } *sh7786_pcie_hwops; | 31 | } *sh7786_pcie_hwops; |
32 | 32 | ||
33 | static struct resource sh7786_pci_32bit_mem_resources[] = { | 33 | static struct resource sh7786_pci0_resources[] = { |
34 | { | 34 | { |
35 | .name = "pci0_mem", | 35 | .name = "PCIe0 IO", |
36 | .start = SH4A_PCIMEM_BASEA, | 36 | .start = 0xfd000000, |
37 | .end = SH4A_PCIMEM_BASEA + SZ_64M - 1, | 37 | .end = 0xfd000000 + SZ_8M - 1, |
38 | .flags = IORESOURCE_MEM, | 38 | .flags = IORESOURCE_IO, |
39 | }, { | 39 | }, { |
40 | .name = "pci1_mem", | 40 | .name = "PCIe0 MEM 0", |
41 | .start = SH4A_PCIMEM_BASEA1, | 41 | .start = 0xc0000000, |
42 | .end = SH4A_PCIMEM_BASEA1 + SZ_64M - 1, | 42 | .end = 0xc0000000 + SZ_512M - 1, |
43 | .flags = IORESOURCE_MEM, | 43 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
44 | }, { | 44 | }, { |
45 | .name = "pci2_mem", | 45 | .name = "PCIe0 MEM 1", |
46 | .start = SH4A_PCIMEM_BASEA2, | 46 | .start = 0x10000000, |
47 | .end = SH4A_PCIMEM_BASEA2 + SZ_64M - 1, | 47 | .end = 0x10000000 + SZ_64M - 1, |
48 | .flags = IORESOURCE_MEM, | 48 | .flags = IORESOURCE_MEM, |
49 | }, { | ||
50 | .name = "PCIe0 MEM 2", | ||
51 | .start = 0xfe100000, | ||
52 | .end = 0xfe100000 + SZ_1M - 1, | ||
49 | }, | 53 | }, |
50 | }; | 54 | }; |
51 | 55 | ||
52 | static struct resource sh7786_pci_29bit_mem_resource = { | 56 | static struct resource sh7786_pci1_resources[] = { |
53 | .start = SH4A_PCIMEM_BASE, | 57 | { |
54 | .end = SH4A_PCIMEM_BASE + SZ_64M - 1, | 58 | .name = "PCIe1 IO", |
55 | .flags = IORESOURCE_MEM, | 59 | .start = 0xfd800000, |
60 | .end = 0xfd800000 + SZ_8M - 1, | ||
61 | .flags = IORESOURCE_IO, | ||
62 | }, { | ||
63 | .name = "PCIe1 MEM 0", | ||
64 | .start = 0xa0000000, | ||
65 | .end = 0xa0000000 + SZ_512M - 1, | ||
66 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, | ||
67 | }, { | ||
68 | .name = "PCIe1 MEM 1", | ||
69 | .start = 0x30000000, | ||
70 | .end = 0x30000000 + SZ_256M - 1, | ||
71 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, | ||
72 | }, { | ||
73 | .name = "PCIe1 MEM 2", | ||
74 | .start = 0xfe300000, | ||
75 | .end = 0xfe300000 + SZ_1M - 1, | ||
76 | }, | ||
56 | }; | 77 | }; |
57 | 78 | ||
58 | static struct resource sh7786_pci_io_resources[] = { | 79 | static struct resource sh7786_pci2_resources[] = { |
59 | { | 80 | { |
60 | .name = "pci0_io", | 81 | .name = "PCIe2 IO", |
61 | .start = SH4A_PCIIO_BASE, | 82 | .start = 0xfc800000, |
62 | .end = SH4A_PCIIO_BASE + SZ_8M - 1, | 83 | .end = 0xfc800000 + SZ_4M - 1, |
63 | .flags = IORESOURCE_IO, | ||
64 | }, { | 84 | }, { |
65 | .name = "pci1_io", | 85 | .name = "PCIe2 MEM 0", |
66 | .start = SH4A_PCIIO_BASE1, | 86 | .start = 0x80000000, |
67 | .end = SH4A_PCIIO_BASE1 + SZ_8M - 1, | 87 | .end = 0x80000000 + SZ_512M - 1, |
68 | .flags = IORESOURCE_IO, | 88 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
69 | }, { | 89 | }, { |
70 | .name = "pci2_io", | 90 | .name = "PCIe2 MEM 1", |
71 | .start = SH4A_PCIIO_BASE2, | 91 | .start = 0x20000000, |
72 | .end = SH4A_PCIIO_BASE2 + SZ_4M - 1, | 92 | .end = 0x20000000 + SZ_256M - 1, |
73 | .flags = IORESOURCE_IO, | 93 | .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, |
94 | }, { | ||
95 | .name = "PCIe2 MEM 2", | ||
96 | .start = 0xfcd00000, | ||
97 | .end = 0xfcd00000 + SZ_1M - 1, | ||
74 | }, | 98 | }, |
75 | }; | 99 | }; |
76 | 100 | ||
77 | extern struct pci_ops sh7786_pci_ops; | 101 | extern struct pci_ops sh7786_pci_ops; |
78 | 102 | ||
79 | #define DEFINE_CONTROLLER(start, idx) \ | 103 | #define DEFINE_CONTROLLER(start, idx) \ |
80 | { \ | 104 | { \ |
81 | .pci_ops = &sh7786_pci_ops, \ | 105 | .pci_ops = &sh7786_pci_ops, \ |
82 | .reg_base = start, \ | 106 | .resources = sh7786_pci##idx##_resources, \ |
83 | /* mem_resource filled in at probe time */ \ | 107 | .nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \ |
84 | .mem_offset = 0, \ | 108 | .reg_base = start, \ |
85 | .io_resource = &sh7786_pci_io_resources[idx], \ | 109 | .mem_offset = 0, \ |
86 | .io_offset = 0, \ | 110 | .io_offset = 0, \ |
87 | } | 111 | } |
88 | 112 | ||
89 | static struct pci_channel sh7786_pci_channels[] = { | 113 | static struct pci_channel sh7786_pci_channels[] = { |
@@ -180,7 +204,9 @@ static int pcie_init(struct sh7786_pcie_port *port) | |||
180 | { | 204 | { |
181 | struct pci_channel *chan = port->hose; | 205 | struct pci_channel *chan = port->hose; |
182 | unsigned int data; | 206 | unsigned int data; |
183 | int ret; | 207 | phys_addr_t memphys; |
208 | size_t memsize; | ||
209 | int ret, i; | ||
184 | 210 | ||
185 | /* Begin initialization */ | 211 | /* Begin initialization */ |
186 | pci_write_reg(chan, 0, SH4A_PCIETCTLR); | 212 | pci_write_reg(chan, 0, SH4A_PCIETCTLR); |
@@ -203,15 +229,24 @@ static int pcie_init(struct sh7786_pcie_port *port) | |||
203 | data |= PCI_CAP_ID_EXP; | 229 | data |= PCI_CAP_ID_EXP; |
204 | pci_write_reg(chan, data, SH4A_PCIEEXPCAP0); | 230 | pci_write_reg(chan, data, SH4A_PCIEEXPCAP0); |
205 | 231 | ||
206 | /* Enable x4 link width and extended sync. */ | 232 | /* Enable data link layer active state reporting */ |
233 | pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3); | ||
234 | |||
235 | /* Enable extended sync and ASPM L0s support */ | ||
207 | data = pci_read_reg(chan, SH4A_PCIEEXPCAP4); | 236 | data = pci_read_reg(chan, SH4A_PCIEEXPCAP4); |
208 | data &= ~(PCI_EXP_LNKSTA_NLW << 16); | 237 | data &= ~PCI_EXP_LNKCTL_ASPMC; |
209 | data |= (1 << 22) | PCI_EXP_LNKCTL_ES; | 238 | data |= PCI_EXP_LNKCTL_ES | 1; |
210 | pci_write_reg(chan, data, SH4A_PCIEEXPCAP4); | 239 | pci_write_reg(chan, data, SH4A_PCIEEXPCAP4); |
211 | 240 | ||
241 | /* Write out the physical slot number */ | ||
242 | data = pci_read_reg(chan, SH4A_PCIEEXPCAP5); | ||
243 | data &= ~PCI_EXP_SLTCAP_PSN; | ||
244 | data |= (port->index + 1) << 19; | ||
245 | pci_write_reg(chan, data, SH4A_PCIEEXPCAP5); | ||
246 | |||
212 | /* Set the completion timer timeout to the maximum 32ms. */ | 247 | /* Set the completion timer timeout to the maximum 32ms. */ |
213 | data = pci_read_reg(chan, SH4A_PCIETLCTLR); | 248 | data = pci_read_reg(chan, SH4A_PCIETLCTLR); |
214 | data &= ~0xffff; | 249 | data &= ~0x3f00; |
215 | data |= 0x32 << 8; | 250 | data |= 0x32 << 8; |
216 | pci_write_reg(chan, data, SH4A_PCIETLCTLR); | 251 | pci_write_reg(chan, data, SH4A_PCIETLCTLR); |
217 | 252 | ||
@@ -224,6 +259,33 @@ static int pcie_init(struct sh7786_pcie_port *port) | |||
224 | data |= (0xff << 16); | 259 | data |= (0xff << 16); |
225 | pci_write_reg(chan, data, SH4A_PCIEMACCTLR); | 260 | pci_write_reg(chan, data, SH4A_PCIEMACCTLR); |
226 | 261 | ||
262 | memphys = __pa(memory_start); | ||
263 | memsize = roundup_pow_of_two(memory_end - memory_start); | ||
264 | |||
265 | /* | ||
266 | * If there's more than 512MB of memory, we need to roll over to | ||
267 | * LAR1/LAMR1. | ||
268 | */ | ||
269 | if (memsize > SZ_512M) { | ||
270 | __raw_writel(memphys + SZ_512M, chan->reg_base + SH4A_PCIELAR1); | ||
271 | __raw_writel(((memsize - SZ_512M) - SZ_256) | 1, | ||
272 | chan->reg_base + SH4A_PCIELAMR1); | ||
273 | memsize = SZ_512M; | ||
274 | } else { | ||
275 | /* | ||
276 | * Otherwise just zero it out and disable it. | ||
277 | */ | ||
278 | __raw_writel(0, chan->reg_base + SH4A_PCIELAR1); | ||
279 | __raw_writel(0, chan->reg_base + SH4A_PCIELAMR1); | ||
280 | } | ||
281 | |||
282 | /* | ||
283 | * LAR0/LAMR0 covers up to the first 512MB, which is enough to | ||
284 | * cover all of lowmem on most platforms. | ||
285 | */ | ||
286 | __raw_writel(memphys, chan->reg_base + SH4A_PCIELAR0); | ||
287 | __raw_writel((memsize - SZ_256) | 1, chan->reg_base + SH4A_PCIELAMR0); | ||
288 | |||
227 | /* Finish initialization */ | 289 | /* Finish initialization */ |
228 | data = pci_read_reg(chan, SH4A_PCIETCTLR); | 290 | data = pci_read_reg(chan, SH4A_PCIETCTLR); |
229 | data |= 0x1; | 291 | data |= 0x1; |
@@ -243,10 +305,14 @@ static int pcie_init(struct sh7786_pcie_port *port) | |||
243 | if (unlikely(ret != 0)) | 305 | if (unlikely(ret != 0)) |
244 | return -ENODEV; | 306 | return -ENODEV; |
245 | 307 | ||
246 | pci_write_reg(chan, 0x00100007, SH4A_PCIEPCICONF1); | 308 | data = pci_read_reg(chan, SH4A_PCIEPCICONF1); |
309 | data &= ~(PCI_STATUS_DEVSEL_MASK << 16); | ||
310 | data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | | ||
311 | (PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16; | ||
312 | pci_write_reg(chan, data, SH4A_PCIEPCICONF1); | ||
313 | |||
247 | pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR); | 314 | pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR); |
248 | pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR); | 315 | pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR); |
249 | pci_write_reg(chan, 0x000050A0, SH4A_PCIEEXPCAP2); | ||
250 | 316 | ||
251 | wmb(); | 317 | wmb(); |
252 | 318 | ||
@@ -254,15 +320,32 @@ static int pcie_init(struct sh7786_pcie_port *port) | |||
254 | printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n", | 320 | printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n", |
255 | port->index, (data >> 20) & 0x3f); | 321 | port->index, (data >> 20) & 0x3f); |
256 | 322 | ||
257 | pci_write_reg(chan, 0x007c0000, SH4A_PCIEPAMR0); | ||
258 | pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH0); | ||
259 | pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL0); | ||
260 | pci_write_reg(chan, 0x80000100, SH4A_PCIEPTCTLR0); | ||
261 | 323 | ||
262 | pci_write_reg(chan, 0x03fc0000, SH4A_PCIEPAMR2); | 324 | for (i = 0; i < chan->nr_resources; i++) { |
263 | pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH2); | 325 | struct resource *res = chan->resources + i; |
264 | pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL2); | 326 | resource_size_t size; |
265 | pci_write_reg(chan, 0x80000000, SH4A_PCIEPTCTLR2); | 327 | u32 enable_mask; |
328 | |||
329 | pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(i)); | ||
330 | |||
331 | size = resource_size(res); | ||
332 | |||
333 | /* | ||
334 | * The PAMR mask is calculated in units of 256kB, which | ||
335 | * keeps things pretty simple. | ||
336 | */ | ||
337 | __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18, | ||
338 | chan->reg_base + SH4A_PCIEPAMR(i)); | ||
339 | |||
340 | pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH(i)); | ||
341 | pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL(i)); | ||
342 | |||
343 | enable_mask = MASK_PARE; | ||
344 | if (res->flags & IORESOURCE_IO) | ||
345 | enable_mask |= MASK_SPC; | ||
346 | |||
347 | pci_write_reg(chan, enable_mask, SH4A_PCIEPTCTLR(i)); | ||
348 | } | ||
266 | 349 | ||
267 | return 0; | 350 | return 0; |
268 | } | 351 | } |
@@ -296,9 +379,7 @@ static int __devinit sh7786_pcie_init_hw(struct sh7786_pcie_port *port) | |||
296 | if (unlikely(ret < 0)) | 379 | if (unlikely(ret < 0)) |
297 | return ret; | 380 | return ret; |
298 | 381 | ||
299 | register_pci_controller(port->hose); | 382 | return register_pci_controller(port->hose); |
300 | |||
301 | return 0; | ||
302 | } | 383 | } |
303 | 384 | ||
304 | static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { | 385 | static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { |
@@ -332,17 +413,7 @@ static int __init sh7786_pcie_init(void) | |||
332 | 413 | ||
333 | port->index = i; | 414 | port->index = i; |
334 | port->hose = sh7786_pci_channels + i; | 415 | port->hose = sh7786_pci_channels + i; |
335 | port->hose->io_map_base = port->hose->io_resource->start; | 416 | port->hose->io_map_base = port->hose->resources[0].start; |
336 | |||
337 | /* | ||
338 | * Check if we are booting in 29 or 32-bit mode | ||
339 | * | ||
340 | * 32-bit mode provides each controller with its own | ||
341 | * memory window, while 29-bit mode uses a shared one. | ||
342 | */ | ||
343 | port->hose->mem_resource = test_mode_pin(MODE_PIN10) ? | ||
344 | &sh7786_pci_32bit_mem_resources[i] : | ||
345 | &sh7786_pci_29bit_mem_resource; | ||
346 | 417 | ||
347 | ret |= sh7786_pcie_hwops->port_init_hw(port); | 418 | ret |= sh7786_pcie_hwops->port_init_hw(port); |
348 | } | 419 | } |
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h index c655290a7750..90a6992576b0 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.h +++ b/arch/sh/drivers/pci/pcie-sh7786.h | |||
@@ -30,47 +30,9 @@ | |||
30 | * for other(Max Payload Size=4096B,PCIIO_SIZE=8M) | 30 | * for other(Max Payload Size=4096B,PCIIO_SIZE=8M) |
31 | */ | 31 | */ |
32 | 32 | ||
33 | /* PCI0-0: PCI I/O space */ | ||
34 | #define SH4A_PCIIO_BASE 0xFD000000 /* PCI I/O for controller 0 */ | ||
35 | #define SH4A_PCIIO_BASE1 0xFD800000 /* PCI I/O for controller 1 (Rev1.14)*/ | ||
36 | #define SH4A_PCIIO_BASE2 0xFC800000 /* PCI I/O for controller 2 (Rev1.171)*/ | ||
37 | |||
38 | #define SH4A_PCIIO_SIZE64 0x00010000 /* PLX allows only 64K */ | ||
39 | #define SH4A_PCIIO_SIZE 0x00800000 /* 8M */ | ||
40 | #define SH4A_PCIIO_SIZE2 0x00400000 /* 4M (Rev1.171)*/ | ||
41 | |||
42 | /* PCI0-1: PCI memory space 29-bit address */ | ||
43 | #define SH4A_PCIMEM_BASE 0x10000000 | ||
44 | #define SH4A_PCIMEM_SIZE 0x04000000 /* 64M */ | ||
45 | |||
46 | /* PCI0-2: PCI memory space 32-bit address */ | ||
47 | #define SH4A_PCIMEM_BASEA 0xC0000000 /* for controller 0 */ | ||
48 | #define SH4A_PCIMEM_BASEA1 0xA0000000 /* for controller 1 (Rev1.14)*/ | ||
49 | #define SH4A_PCIMEM_BASEA2 0x80000000 /* for controller 2 (Rev1.171)*/ | ||
50 | #define SH4A_PCIMEM_SIZEA 0x20000000 /* 512M */ | ||
51 | |||
52 | /* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/ | 33 | /* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/ |
53 | #define SH4A_PCIBMSTR_TRANSLATION 0x20000000 | 34 | #define SH4A_PCIBMSTR_TRANSLATION 0x20000000 |
54 | 35 | ||
55 | #define SH4A_PCI_DEVICE_ID 0x0002 | ||
56 | #define SH4A_PCI_VENDOR_ID 0x1912 | ||
57 | |||
58 | // PCI compatible 000-03f | ||
59 | #define PCI_CMD 0x004 | ||
60 | #define PCI_RID 0x008 | ||
61 | #define PCI_IBAR 0x010 | ||
62 | #define PCI_MBAR0 0x014 | ||
63 | #define PCI_MBAR1 0x018 | ||
64 | |||
65 | /* PCI power management/MSI/capablity 040-0ff */ | ||
66 | /* PCIE extended 100-fff */ | ||
67 | |||
68 | /* SH7786 device identification */ // Rev1.171 | ||
69 | #define SH4A_PVR (0xFF000030) | ||
70 | #define SH4A_PVR_SHX3 (0x10400000) | ||
71 | #define SH4A_PRR (0xFF000044) | ||
72 | #define SH4A_PRR_SH7786 (0x00000400) // Rev1.171 | ||
73 | |||
74 | /* SPVCR0 */ | 36 | /* SPVCR0 */ |
75 | #define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */ | 37 | #define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */ |
76 | #define BITS_TOP_MB (24) | 38 | #define BITS_TOP_MB (24) |
@@ -350,23 +312,23 @@ | |||
350 | #define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */ | 312 | #define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */ |
351 | #define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */ | 313 | #define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */ |
352 | 314 | ||
353 | /* PCIEPARL0 */ | 315 | /* PCIEPARL */ |
354 | #define SH4A_PCIEPARL0 (0x020400) /* R/W R/W 0x0000 0000 32 */ | 316 | #define SH4A_PCIEPARL(x) (0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */ |
355 | #define BITS_PAL (18) | 317 | #define BITS_PAL (18) |
356 | #define MASK_PAL (0x3fff<<BITS_PAL) | 318 | #define MASK_PAL (0x3fff<<BITS_PAL) |
357 | 319 | ||
358 | /* PCIEPARH0 */ | 320 | /* PCIEPARH */ |
359 | #define SH4A_PCIEPARH0 (0x020404) /* R/W R/W 0x0000 0000 32 */ | 321 | #define SH4A_PCIEPARH(x) (0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */ |
360 | #define BITS_PAH (0) | 322 | #define BITS_PAH (0) |
361 | #define MASK_PAH (0xffffffff<<BITS_PAH) | 323 | #define MASK_PAH (0xffffffff<<BITS_PAH) |
362 | 324 | ||
363 | /* PCIEPAMR0 */ | 325 | /* PCIEPAMR */ |
364 | #define SH4A_PCIEPAMR0 (0x020408) /* R/W R/W 0x0000 0000 32 */ | 326 | #define SH4A_PCIEPAMR(x) (0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */ |
365 | #define BITS_PAM (18) | 327 | #define BITS_PAM (18) |
366 | #define MASK_PAM (0x3fff<<BITS_PAM) | 328 | #define MASK_PAM (0x3fff<<BITS_PAM) |
367 | 329 | ||
368 | /* PCIEPTCTLR0 */ | 330 | /* PCIEPTCTLR */ |
369 | #define SH4A_PCIEPTCTLR0 (0x02040C) /* R/W R/W 0x0000 0000 32 */ | 331 | #define SH4A_PCIEPTCTLR(x) (0x02040C + ((x) * 0x20)) |
370 | #define BITS_PARE (31) | 332 | #define BITS_PARE (31) |
371 | #define MASK_PARE (0x1<<BITS_PARE) | 333 | #define MASK_PARE (0x1<<BITS_PARE) |
372 | #define BITS_TC (20) | 334 | #define BITS_TC (20) |
@@ -378,26 +340,6 @@ | |||
378 | #define BITS_SPC (8) | 340 | #define BITS_SPC (8) |
379 | #define MASK_SPC (0x1<<BITS_SPC) | 341 | #define MASK_SPC (0x1<<BITS_SPC) |
380 | 342 | ||
381 | #define SH4A_PCIEPARL1 (0x020420) /* R/W R/W 0x0000 0000 32 */ | ||
382 | #define SH4A_PCIEPARH1 (0x020424) /* R/W R/W 0x0000 0000 32 */ | ||
383 | #define SH4A_PCIEPAMR1 (0x020428) /* R/W R/W 0x0000 0000 32 */ | ||
384 | #define SH4A_PCIEPTCTLR1 (0x02042C) /* R/W R/W 0x0000 0000 32 */ | ||
385 | #define SH4A_PCIEPARL2 (0x020440) /* R/W R/W 0x0000 0000 32 */ | ||
386 | #define SH4A_PCIEPARH2 (0x020444) /* R/W R/W 0x0000 0000 32 */ | ||
387 | #define SH4A_PCIEPAMR2 (0x020448) /* R/W R/W 0x0000 0000 32 */ | ||
388 | #define SH4A_PCIEPTCTLR2 (0x02044C) /* R/W R/W 0x0000 0000 32 */ | ||
389 | #define SH4A_PCIEPARL3 (0x020460) /* R/W R/W 0x0000 0000 32 */ | ||
390 | #define SH4A_PCIEPARH3 (0x020464) /* R/W R/W 0x0000 0000 32 */ | ||
391 | #define SH4A_PCIEPAMR3 (0x020468) /* R/W R/W 0x0000 0000 32 */ | ||
392 | #define SH4A_PCIEPTCTLR3 (0x02046C) /* R/W R/W 0x0000 0000 32 */ | ||
393 | #define SH4A_PCIEPARL4 (0x020480) /* R/W R/W 0x0000 0000 32 */ | ||
394 | #define SH4A_PCIEPARH4 (0x020484) /* R/W R/W 0x0000 0000 32 */ | ||
395 | #define SH4A_PCIEPAMR4 (0x020488) /* R/W R/W 0x0000 0000 32 */ | ||
396 | #define SH4A_PCIEPTCTLR4 (0x02048C) /* R/W R/W 0x0000 0000 32 */ | ||
397 | #define SH4A_PCIEPARL5 (0x0204A0) /* R/W R/W 0x0000 0000 32 */ | ||
398 | #define SH4A_PCIEPARH5 (0x0204A4) /* R/W R/W 0x0000 0000 32 */ | ||
399 | #define SH4A_PCIEPAMR5 (0x0204A8) /* R/W R/W 0x0000 0000 32 */ | ||
400 | #define SH4A_PCIEPTCTLR5 (0x0204AC) /* R/W R/W 0x0000 0000 32 */ | ||
401 | #define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */ | 343 | #define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */ |
402 | #define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */ | 344 | #define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */ |
403 | #define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */ | 345 | #define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */ |