sh: Magic Panel MTD mapping update.

This update moves the flash mapping for the Magic Panel into the board
setup. It also removes references to the old MTD mapping option in the
defconfig.

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 85 insertions, 3 deletions

diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/magicpanelr2/setup.c
index c5930656654f..f3b8b07ea5d6 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/magicpanelr2/setup.c
@@ -12,14 +12,19 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
-#include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
 #include <asm/magicpanelr2.h>
 #include <asm/heartbeat.h>
 
 #define LAN9115_READY   (ctrl_inl(0xA8000084UL) & 0x00000001UL)
 
+/* Prefer cmdline over RedBoot */
+static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
+
 /* Wait until reset finished. Timeout is 100ms. */
 static int __init ethernet_reset_finished(void)
 {
@@ -270,13 +275,90 @@ static struct platform_device heartbeat_device = {
         .resource       = heartbeat_resources,
 };
 
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition mpr2_partitions[] = {
+        /* Reserved for bootloader, read-only */
+        {
+                .name = "Bootloader",
+                .offset = 0x00000000UL,
+                .size = MPR2_MTD_BOOTLOADER_SIZE,
+                .mask_flags = MTD_WRITEABLE,
+        },
+        /* Reserved for kernel image */
+        {
+                .name = "Kernel",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = MPR2_MTD_KERNEL_SIZE,
+        },
+        /* Rest is used for Flash FS */
+        {
+                .name = "Flash_FS",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = MTDPART_SIZ_FULL,
+        }
+};
+
+static struct physmap_flash_data flash_data = {
+        .width          = 2,
+};
+
+static struct resource flash_resource = {
+        .start          = 0x00000000,
+        .end            = 0x2000000UL,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+        .name           = "physmap-flash",
+        .id             = -1,
+        .resource       = &flash_resource,
+        .num_resources  = 1,
+        .dev            = {
+                .platform_data = &flash_data,
+        },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info mpr2_flash_map = {
+        .name = "Magic Panel R2 Flash",
+        .size = 0x2000000UL,
+        .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+        int nr_parts = 0;
+
+        simple_map_init(&mpr2_flash_map);
+        flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map);
+        nr_parts = parse_mtd_partitions(flash_mtd, probes,
+                                        &parsed_partitions, 0);
+        /* If there is no partition table, used the hard coded table */
+        if (nr_parts <= 0) {
+                flash_data.parts = mpr2_partitions;
+                flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions);
+        } else {
+                flash_data.nr_parts = nr_parts;
+                flash_data.parts = parsed_partitions;
+        }
+}
+
+/*
+ * Add all resources to the platform_device
+ */
+
 static struct platform_device *mpr2_devices[] __initdata = {
         &heartbeat_device,
         &smc911x_device,
+        &flash_device,
 };
 
+
 static int __init mpr2_devices_setup(void)
 {
+        set_mtd_partitions();
         return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
 }
 device_initcall(mpr2_devices_setup);
@@ -308,5 +390,5 @@ static void __init init_mpr2_IRQ(void)
 static struct sh_machine_vector mv_mpr2 __initmv = {
         .mv_name                = "mpr2",
         .mv_setup               = mpr2_setup,
-        .mv_init_irq            = init_mpr2_IRQ,
+        .mv_init_irq            = init_mpr2_IRQ,
 };