Merge branch 'wip-2.6.34' into old-private-masterarchived-private-master

1 files changed, 530 insertions, 70 deletions

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3b1ceb46fa54..6c13b92742e8 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -19,13 +19,22 @@
 #include <linux/usb/r8a66597.h>
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_msiof.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
+#include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/tw9910.h>
+#include <media/mt9t112.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
-#include <asm/sh_keysc.h>
 #include <asm/clock.h>
+#include <asm/suspend.h>
 #include <cpu/sh7724.h>
 
 /*
@@ -55,18 +64,16 @@
 
 /* Heartbeat */
 static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
 static struct heartbeat_data heartbeat_data = {
-        .regsize = 8,
         .nr_bits = 4,
         .bit_pos = led_pos,
 };
 
-static struct resource heartbeat_resources[] = {
-        [0] = {
-                .start  = 0xA405012C, /* PTG */
-                .end    = 0xA405012E - 1,
-                .flags  = IORESOURCE_MEM,
-        },
+static struct resource heartbeat_resource = {
+        .start  = 0xA405012C, /* PTG */
+        .end    = 0xA405012E - 1,
+        .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
 };
 
 static struct platform_device heartbeat_device = {
@@ -75,8 +82,8 @@ static struct platform_device heartbeat_device = {
         .dev = {
                 .platform_data = &heartbeat_data,
         },
-        .num_resources  = ARRAY_SIZE(heartbeat_resources),
-        .resource       = heartbeat_resources,
+        .num_resources  = 1,
+        .resource       = &heartbeat_resource,
 };
 
 /* MTD */
@@ -119,8 +126,6 @@ static struct platform_device nor_flash_device = {
 
 /* SH Eth */
 #define SH_ETH_ADDR     (0xA4600000)
-#define SH_ETH_MAHR     (SH_ETH_ADDR + 0x1C0)
-#define SH_ETH_MALR     (SH_ETH_ADDR + 0x1C8)
 static struct resource sh_eth_resources[] = {
         [0] = {
                 .start = SH_ETH_ADDR,
@@ -147,6 +152,9 @@ static struct platform_device sh_eth_device = {
         },
         .num_resources = ARRAY_SIZE(sh_eth_resources),
         .resource = sh_eth_resources,
+        .archdata = {
+                .hwblk_id = HWBLK_ETHER,
+        },
 };
 
 /* USB0 host */
@@ -185,30 +193,18 @@ static struct platform_device usb0_host_device = {
         .resource       = usb0_host_resources,
 };
 
-/*
- * USB1
- *
- * CN5 can use both host/function,
- * and we can determine it by checking PTB[3]
- *
- * This time only USB1 host is supported.
- */
+/* USB1 host/function */
 void usb1_port_power(int port, int power)
 {
-        if (!gpio_get_value(GPIO_PTB3)) {
-                printk(KERN_ERR "USB1 function is not supported\n");
-                return;
-        }
-
         gpio_set_value(GPIO_PTB5, power);
 }
 
-static struct r8a66597_platdata usb1_host_data = {
+static struct r8a66597_platdata usb1_common_data = {
         .on_chip = 1,
         .port_power = usb1_port_power,
 };
 
-static struct resource usb1_host_resources[] = {
+static struct resource usb1_common_resources[] = {
         [0] = {
                 .start  = 0xa4d90000,
                 .end    = 0xa4d90124 - 1,
@@ -221,16 +217,16 @@ static struct resource usb1_host_resources[] = {
         },
 };
 
-static struct platform_device usb1_host_device = {
-        .name           = "r8a66597_hcd",
+static struct platform_device usb1_common_device = {
+        /* .name will be added in arch_setup */
         .id             = 1,
         .dev = {
                 .dma_mask               = NULL,         /*  not use dma */
                 .coherent_dma_mask      = 0xffffffff,
-                .platform_data          = &usb1_host_data,
+                .platform_data          = &usb1_common_data,
         },
-        .num_resources  = ARRAY_SIZE(usb1_host_resources),
-        .resource       = usb1_host_resources,
+        .num_resources  = ARRAY_SIZE(usb1_common_resources),
+        .resource       = usb1_common_resources,
 };
 
 /* LCDC */
@@ -345,10 +341,20 @@ static struct platform_device ceu1_device = {
 };
 
 /* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+        {
+                I2C_BOARD_INFO("da7210", 0x1a),
+        },
+};
+
 static struct i2c_board_info i2c1_devices[] = {
         {
                 I2C_BOARD_INFO("r2025sd", 0x32),
         },
+        {
+                I2C_BOARD_INFO("lis3lv02d", 0x1c),
+                .irq = 33,
+        }
 };
 
 /* KEYSC */
@@ -428,18 +434,367 @@ static struct i2c_board_info ts_i2c_clients = {
         .irq            = IRQ0,
 };
 
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+/* SHDI0 */
+static void sdhi0_set_pwr(struct platform_device *pdev, int state)
+{
+        gpio_set_value(GPIO_PTB6, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi0_info = {
+        .set_pwr = sdhi0_set_pwr,
+};
+
+static struct resource sdhi0_resources[] = {
+        [0] = {
+                .name   = "SDHI0",
+                .start  = 0x04ce0000,
+                .end    = 0x04ce01ff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 100,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sdhi0_device = {
+        .name           = "sh_mobile_sdhi",
+        .num_resources  = ARRAY_SIZE(sdhi0_resources),
+        .resource       = sdhi0_resources,
+        .id             = 0,
+        .dev    = {
+                .platform_data  = &sdhi0_info,
+        },
+        .archdata = {
+                .hwblk_id = HWBLK_SDHI0,
+        },
+};
+
+/* SHDI1 */
+static void sdhi1_set_pwr(struct platform_device *pdev, int state)
+{
+        gpio_set_value(GPIO_PTB7, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi1_info = {
+        .set_pwr = sdhi1_set_pwr,
+};
+
+static struct resource sdhi1_resources[] = {
+        [0] = {
+                .name   = "SDHI1",
+                .start  = 0x04cf0000,
+                .end    = 0x04cf01ff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 23,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sdhi1_device = {
+        .name           = "sh_mobile_sdhi",
+        .num_resources  = ARRAY_SIZE(sdhi1_resources),
+        .resource       = sdhi1_resources,
+        .id             = 1,
+        .dev    = {
+                .platform_data  = &sdhi1_info,
+        },
+        .archdata = {
+                .hwblk_id = HWBLK_SDHI1,
+        },
+};
+
+#else
+
+/* MMC SPI */
+static int mmc_spi_get_ro(struct device *dev)
+{
+        return gpio_get_value(GPIO_PTY6);
+}
+
+static int mmc_spi_get_cd(struct device *dev)
+{
+        return !gpio_get_value(GPIO_PTY7);
+}
+
+static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
+{
+        gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
+}
+
+static struct mmc_spi_platform_data mmc_spi_info = {
+        .get_ro = mmc_spi_get_ro,
+        .get_cd = mmc_spi_get_cd,
+        .caps = MMC_CAP_NEEDS_POLL,
+        .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
+        .setpower = mmc_spi_setpower,
+};
+
+static struct spi_board_info spi_bus[] = {
+        {
+                .modalias       = "mmc_spi",
+                .platform_data  = &mmc_spi_info,
+                .max_speed_hz   = 5000000,
+                .mode           = SPI_MODE_0,
+                .controller_data = (void *) GPIO_PTM4,
+        },
+};
+
+/* MSIOF0 */
+static struct sh_msiof_spi_info msiof0_data = {
+        .num_chipselect = 1,
+};
+
+static struct resource msiof0_resources[] = {
+        [0] = {
+                .name   = "MSIOF0",
+                .start  = 0xa4c40000,
+                .end    = 0xa4c40063,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 84,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device msiof0_device = {
+        .name           = "spi_sh_msiof",
+        .id             = 0, /* MSIOF0 */
+        .dev = {
+                .platform_data = &msiof0_data,
+        },
+        .num_resources  = ARRAY_SIZE(msiof0_resources),
+        .resource       = msiof0_resources,
+        .archdata = {
+                .hwblk_id = HWBLK_MSIOF0,
+        },
+};
+
+#endif
+
+/* I2C Video/Camera */
+static struct i2c_board_info i2c_camera[] = {
+        {
+                I2C_BOARD_INFO("tw9910", 0x45),
+        },
+        {
+                /* 1st camera */
+                I2C_BOARD_INFO("mt9t112", 0x3c),
+        },
+        {
+                /* 2nd camera */
+                I2C_BOARD_INFO("mt9t112", 0x3c),
+        },
+};
+
+/* tw9910 */
+static int tw9910_power(struct device *dev, int mode)
+{
+        int val = mode ? 0 : 1;
+
+        gpio_set_value(GPIO_PTU2, val);
+        if (mode)
+                mdelay(100);
+
+        return 0;
+}
+
+static struct tw9910_video_info tw9910_info = {
+        .buswidth       = SOCAM_DATAWIDTH_8,
+        .mpout          = TW9910_MPO_FIELD,
+};
+
+static struct soc_camera_link tw9910_link = {
+        .i2c_adapter_id = 0,
+        .bus_id         = 1,
+        .power          = tw9910_power,
+        .board_info     = &i2c_camera[0],
+        .module_name    = "tw9910",
+        .priv           = &tw9910_info,
+};
+
+/* mt9t112 */
+static int mt9t112_power1(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_PTA3, mode);
+        if (mode)
+                mdelay(100);
+
+        return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info1 = {
+        .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+        .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link1 = {
+        .i2c_adapter_id = 0,
+        .power          = mt9t112_power1,
+        .bus_id         = 0,
+        .board_info     = &i2c_camera[1],
+        .module_name    = "mt9t112",
+        .priv           = &mt9t112_info1,
+};
+
+static int mt9t112_power2(struct device *dev, int mode)
+{
+        gpio_set_value(GPIO_PTA4, mode);
+        if (mode)
+                mdelay(100);
+
+        return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info2 = {
+        .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+        .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link2 = {
+        .i2c_adapter_id = 1,
+        .power          = mt9t112_power2,
+        .bus_id         = 1,
+        .board_info     = &i2c_camera[2],
+        .module_name    = "mt9t112",
+        .priv           = &mt9t112_info2,
+};
+
+static struct platform_device camera_devices[] = {
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 0,
+                .dev    = {
+                        .platform_data = &tw9910_link,
+                },
+        },
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 1,
+                .dev    = {
+                        .platform_data = &mt9t112_link1,
+                },
+        },
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 2,
+                .dev    = {
+                        .platform_data = &mt9t112_link2,
+                },
+        },
+};
+
+/* FSI */
+/*
+ * FSI-B use external clock which came from da7210.
+ * So, we should change parent of fsi
+ */
+#define FCLKBCR         0xa415000c
+static void fsimck_init(struct clk *clk)
+{
+        u32 status = __raw_readl(clk->enable_reg);
+
+        /* use external clock */
+        status &= ~0x000000ff;
+        status |= 0x00000080;
+
+        __raw_writel(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+        .init = fsimck_init,
+};
+
+static struct clk fsimckb_clk = {
+        .name           = "fsimckb_clk",
+        .id             = -1,
+        .ops            = &fsimck_clk_ops,
+        .enable_reg     = (void __iomem *)FCLKBCR,
+        .rate           = 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+        .portb_flags = SH_FSI_BRS_INV |
+                       SH_FSI_OUT_SLAVE_MODE |
+                       SH_FSI_IN_SLAVE_MODE |
+                       SH_FSI_OFMT(I2S) |
+                       SH_FSI_IFMT(I2S),
+};
+
+static struct resource fsi_resources[] = {
+        [0] = {
+                .name   = "FSI",
+                .start  = 0xFE3C0000,
+                .end    = 0xFE3C021d,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 108,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device fsi_device = {
+        .name           = "sh_fsi",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(fsi_resources),
+        .resource       = fsi_resources,
+        .dev    = {
+                .platform_data  = &fsi_info,
+        },
+        .archdata = {
+                .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
+        },
+};
+
+/* IrDA */
+static struct resource irda_resources[] = {
+        [0] = {
+                .name   = "IrDA",
+                .start  = 0xA45D0000,
+                .end    = 0xA45D0049,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 20,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device irda_device = {
+        .name           = "sh_sir",
+        .num_resources  = ARRAY_SIZE(irda_resources),
+        .resource       = irda_resources,
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
         &heartbeat_device,
         &nor_flash_device,
         &sh_eth_device,
         &usb0_host_device,
-        &usb1_host_device, /* USB1 host support */
+        &usb1_common_device,
         &lcdc_device,
         &ceu0_device,
         &ceu1_device,
         &keysc_device,
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+        &sdhi0_device,
+        &sdhi1_device,
+#else
+        &msiof0_device,
+#endif
+        &camera_devices[0],
+        &camera_devices[1],
+        &camera_devices[2],
+        &fsi_device,
+        &irda_device,
 };
 
+#ifdef CONFIG_I2C
 #define EEPROM_ADDR 0x50
 static u8 mac_read(struct i2c_adapter *a, u8 command)
 {
@@ -466,12 +821,9 @@ static u8 mac_read(struct i2c_adapter *a, u8 command)
         return buf;
 }
 
-#define MAC_LEN 6
-static void __init sh_eth_init(void)
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
 {
         struct i2c_adapter *a = i2c_get_adapter(1);
-        struct clk *eth_clk;
-        u8 mac[MAC_LEN];
         int i;
 
         if (!a) {
@@ -479,39 +831,41 @@ static void __init sh_eth_init(void)
                 return;
         }
 
-        eth_clk = clk_get(NULL, "eth0");
-        if (!eth_clk) {
-                pr_err("can not get eth0 clk\n");
-                return;
-        }
-
         /* read MAC address frome EEPROM */
-        for (i = 0; i < MAC_LEN; i++) {
-                mac[i] = mac_read(a, 0x10 + i);
+        for (i = 0; i < sizeof(pd->mac_addr); i++) {
+                pd->mac_addr[i] = mac_read(a, 0x10 + i);
                 msleep(10);
         }
 
-        /* clock enable */
-        clk_enable(eth_clk);
-
-        /* reset sh-eth */
-        ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
-        /* set MAC addr */
-        ctrl_outl((mac[0] << 24) |
-                  (mac[1] << 16) |
-                  (mac[2] <<  8) |
-                  (mac[3] <<  0), SH_ETH_MAHR);
-        ctrl_outl((mac[4] <<  8) |
-                  (mac[5] <<  0), SH_ETH_MALR);
-
-        clk_put(eth_clk);
+        i2c_put_adapter(a);
+}
+#else
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+        pr_err("unable to read sh_eth MAC address\n");
 }
+#endif
 
 #define PORT_HIZA 0xA4050158
 #define IODRIVEA  0xA405018A
+
+extern char ecovec24_sdram_enter_start;
+extern char ecovec24_sdram_enter_end;
+extern char ecovec24_sdram_leave_start;
+extern char ecovec24_sdram_leave_end;
+
 static int __init arch_setup(void)
 {
+        struct clk *clk;
+
+        /* register board specific self-refresh code */
+        sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+                                        SUSP_SH_RSTANDBY,
+                                        &ecovec24_sdram_enter_start,
+                                        &ecovec24_sdram_enter_end,
+                                        &ecovec24_sdram_leave_start,
+                                        &ecovec24_sdram_leave_end);
+
         /* enable STATUS0, STATUS2 and PDSTATUS */
         gpio_request(GPIO_FN_STATUS0, NULL);
         gpio_request(GPIO_FN_STATUS2, NULL);
@@ -530,7 +884,7 @@ static int __init arch_setup(void)
         gpio_direction_output(GPIO_PTG1, 0);
         gpio_direction_output(GPIO_PTG2, 0);
         gpio_direction_output(GPIO_PTG3, 0);
-        ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+        __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
 
         /* enable SH-Eth */
         gpio_request(GPIO_PTA1, NULL);
@@ -550,16 +904,24 @@ static int __init arch_setup(void)
         gpio_request(GPIO_FN_LNKSTA,       NULL);
 
         /* enable USB */
-        ctrl_outw(0x0000, 0xA4D80000);
-        ctrl_outw(0x0000, 0xA4D90000);
+        __raw_writew(0x0000, 0xA4D80000);
+        __raw_writew(0x0000, 0xA4D90000);
         gpio_request(GPIO_PTB3,  NULL);
         gpio_request(GPIO_PTB4,  NULL);
         gpio_request(GPIO_PTB5,  NULL);
         gpio_direction_input(GPIO_PTB3);
         gpio_direction_output(GPIO_PTB4, 0);
         gpio_direction_output(GPIO_PTB5, 0);
-        ctrl_outw(0x0600, 0xa40501d4);
-        ctrl_outw(0x0600, 0xa4050192);
+        __raw_writew(0x0600, 0xa40501d4);
+        __raw_writew(0x0600, 0xa4050192);
+
+        if (gpio_get_value(GPIO_PTB3)) {
+                printk(KERN_INFO "USB1 function is selected\n");
+                usb1_common_device.name = "r8a66597_udc";
+        } else {
+                printk(KERN_INFO "USB1 host is selected\n");
+                usb1_common_device.name = "r8a66597_hcd";
+        }
 
         /* enable LCDC */
         gpio_request(GPIO_FN_LCDD23,   NULL);
@@ -592,7 +954,7 @@ static int __init arch_setup(void)
         gpio_request(GPIO_FN_LCDVSYN,  NULL);
         gpio_request(GPIO_FN_LCDDON,   NULL);
         gpio_request(GPIO_FN_LCDLCLK,  NULL);
-        ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+        __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
 
         gpio_request(GPIO_PTE6, NULL);
         gpio_request(GPIO_PTU1, NULL);
@@ -603,8 +965,8 @@ static int __init arch_setup(void)
         gpio_direction_output(GPIO_PTR1, 0);
         gpio_direction_output(GPIO_PTA2, 0);
 
-        /* I/O buffer drive ability is low */
-        ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+        /* I/O buffer drive ability is high */
+        __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
 
         if (gpio_get_value(GPIO_PTE6)) {
                 /* DVI */
@@ -710,7 +1072,106 @@ static int __init arch_setup(void)
         gpio_direction_input(GPIO_PTR5);
         gpio_direction_input(GPIO_PTR6);
 
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+        /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
+        gpio_request(GPIO_FN_SDHI0CD,  NULL);
+        gpio_request(GPIO_FN_SDHI0WP,  NULL);
+        gpio_request(GPIO_FN_SDHI0CMD, NULL);
+        gpio_request(GPIO_FN_SDHI0CLK, NULL);
+        gpio_request(GPIO_FN_SDHI0D3,  NULL);
+        gpio_request(GPIO_FN_SDHI0D2,  NULL);
+        gpio_request(GPIO_FN_SDHI0D1,  NULL);
+        gpio_request(GPIO_FN_SDHI0D0,  NULL);
+        gpio_request(GPIO_PTB6, NULL);
+        gpio_direction_output(GPIO_PTB6, 0);
+
+        /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
+        gpio_request(GPIO_FN_SDHI1CD,  NULL);
+        gpio_request(GPIO_FN_SDHI1WP,  NULL);
+        gpio_request(GPIO_FN_SDHI1CMD, NULL);
+        gpio_request(GPIO_FN_SDHI1CLK, NULL);
+        gpio_request(GPIO_FN_SDHI1D3,  NULL);
+        gpio_request(GPIO_FN_SDHI1D2,  NULL);
+        gpio_request(GPIO_FN_SDHI1D1,  NULL);
+        gpio_request(GPIO_FN_SDHI1D0,  NULL);
+        gpio_request(GPIO_PTB7, NULL);
+        gpio_direction_output(GPIO_PTB7, 0);
+
+        /* I/O buffer drive ability is high for SDHI1 */
+        __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#else
+        /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
+        gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
+        gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
+        gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
+        gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
+        gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
+        gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
+        gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
+        gpio_request(GPIO_PTY6, NULL); /* write protect */
+        gpio_direction_input(GPIO_PTY6);
+        gpio_request(GPIO_PTY7, NULL); /* card detect */
+        gpio_direction_input(GPIO_PTY7);
+
+        spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+#endif
+
+        /* enable Video */
+        gpio_request(GPIO_PTU2, NULL);
+        gpio_direction_output(GPIO_PTU2, 1);
+
+        /* enable Camera */
+        gpio_request(GPIO_PTA3, NULL);
+        gpio_request(GPIO_PTA4, NULL);
+        gpio_direction_output(GPIO_PTA3, 0);
+        gpio_direction_output(GPIO_PTA4, 0);
+
+        /* enable FSI */
+        gpio_request(GPIO_FN_FSIMCKB,    NULL);
+        gpio_request(GPIO_FN_FSIIBSD,    NULL);
+        gpio_request(GPIO_FN_FSIOBSD,    NULL);
+        gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+        gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+        gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+        gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+        gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+
+        /* set SPU2 clock to 83.4 MHz */
+        clk = clk_get(NULL, "spu_clk");
+        clk_set_rate(clk, clk_round_rate(clk, 83333333));
+        clk_put(clk);
+
+        /* change parent of FSI B */
+        clk = clk_get(NULL, "fsib_clk");
+        clk_register(&fsimckb_clk);
+        clk_set_parent(clk, &fsimckb_clk);
+        clk_set_rate(clk, 11000);
+        clk_set_rate(&fsimckb_clk, 11000);
+        clk_put(clk);
+
+        gpio_request(GPIO_PTU0, NULL);
+        gpio_direction_output(GPIO_PTU0, 0);
+        mdelay(20);
+
+        /* enable motion sensor */
+        gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+        gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
+        /* set VPU clock to 166 MHz */
+        clk = clk_get(NULL, "vpu_clk");
+        clk_set_rate(clk, clk_round_rate(clk, 166000000));
+        clk_put(clk);
+
+        /* enable IrDA */
+        gpio_request(GPIO_FN_IRDA_OUT, NULL);
+        gpio_request(GPIO_FN_IRDA_IN,  NULL);
+        gpio_request(GPIO_PTU5, NULL);
+        gpio_direction_output(GPIO_PTU5, 0);
+
         /* enable I2C device */
+        i2c_register_board_info(0, i2c0_devices,
+                                ARRAY_SIZE(i2c0_devices));
+
         i2c_register_board_info(1, i2c1_devices,
                                 ARRAY_SIZE(i2c1_devices));
 
@@ -721,12 +1182,11 @@ arch_initcall(arch_setup);
 
 static int __init devices_setup(void)
 {
-        sh_eth_init();
+        sh_eth_init(&sh_eth_plat);
         return 0;
 }
 device_initcall(devices_setup);
 
-
 static struct sh_machine_vector mv_ecovec __initmv = {
         .mv_name        = "R0P7724 (EcoVec)",
 };