Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 354 insertions, 0 deletions

diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
new file mode 100644
index 000000000000..81f1968c3269
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -0,0 +1,354 @@
+/*
+ * arch/ppc/syslib/ppc85xx_setup.c
+ *
+ * MPC85XX common board code
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+#include <linux/tty.h>  /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/mpc85xx.h>
+#include <asm/immap_85xx.h>
+#include <asm/mmu.h>
+#include <asm/ppc_sys.h>
+#include <asm/kgdb.h>
+
+#include <syslib/ppc85xx_setup.h>
+
+/* Return the amount of memory */
+unsigned long __init
+mpc85xx_find_end_of_memory(void)
+{
+        bd_t *binfo;
+
+        binfo = (bd_t *) __res;
+
+        return binfo->bi_memsize;
+}
+
+/* The decrementer counts at the system (internal) clock freq divided by 8 */
+void __init
+mpc85xx_calibrate_decr(void)
+{
+        bd_t *binfo = (bd_t *) __res;
+        unsigned int freq, divisor;
+
+        /* get the core frequency */
+        freq = binfo->bi_busfreq;
+
+        /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */
+        divisor = 8;
+        tb_ticks_per_jiffy = freq / divisor / HZ;
+        tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+
+        /* Set the time base to zero */
+        mtspr(SPRN_TBWL, 0);
+        mtspr(SPRN_TBWU, 0);
+
+        /* Clear any pending timer interrupts */
+        mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+        /* Enable decrementer interrupt */
+        mtspr(SPRN_TCR, TCR_DIE);
+}
+
+#ifdef CONFIG_SERIAL_8250
+void __init
+mpc85xx_early_serial_map(void)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+        struct uart_port serial_req;
+#endif
+        struct plat_serial8250_port *pdata;
+        bd_t *binfo = (bd_t *) __res;
+        pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART);
+
+        /* Setup serial port access */
+        pdata[0].uartclk = binfo->bi_busfreq;
+        pdata[0].mapbase += binfo->bi_immr_base;
+        pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE);
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+        memset(&serial_req, 0, sizeof (serial_req));
+        serial_req.iotype = SERIAL_IO_MEM;
+        serial_req.mapbase = pdata[0].mapbase;
+        serial_req.membase = pdata[0].membase;
+        serial_req.regshift = 0;
+
+        gen550_init(0, &serial_req);
+#endif
+
+        pdata[1].uartclk = binfo->bi_busfreq;
+        pdata[1].mapbase += binfo->bi_immr_base;
+        pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE);
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+        /* Assume gen550_init() doesn't modify serial_req */
+        serial_req.mapbase = pdata[1].mapbase;
+        serial_req.membase = pdata[1].membase;
+
+        gen550_init(1, &serial_req);
+#endif
+}
+#endif
+
+void
+mpc85xx_restart(char *cmd)
+{
+        local_irq_disable();
+        abort();
+}
+
+void
+mpc85xx_power_off(void)
+{
+        local_irq_disable();
+        for(;;);
+}
+
+void
+mpc85xx_halt(void)
+{
+        local_irq_disable();
+        for(;;);
+}
+
+#ifdef CONFIG_PCI
+static void __init
+mpc85xx_setup_pci1(struct pci_controller *hose)
+{
+        volatile struct ccsr_pci *pci;
+        volatile struct ccsr_guts *guts;
+        unsigned short temps;
+        bd_t *binfo = (bd_t *) __res;
+
+        pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET,
+                    MPC85xx_PCI1_SIZE);
+
+        guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET,
+                    MPC85xx_GUTS_SIZE);
+
+        early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps);
+        temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+        early_write_config_word(hose, 0, 0, PCI_COMMAND, temps);
+
+#define PORDEVSR_PCI    (0x00800000)    /* PCI Mode */
+        if (guts->pordevsr & PORDEVSR_PCI) {
+                early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+        } else {
+                /* PCI-X init */
+                temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+                        | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+                early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps);
+        }
+
+        /* Disable all windows (except powar0 since its ignored) */
+        pci->powar1 = 0;
+        pci->powar2 = 0;
+        pci->powar3 = 0;
+        pci->powar4 = 0;
+        pci->piwar1 = 0;
+        pci->piwar2 = 0;
+        pci->piwar3 = 0;
+
+        /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */
+        pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
+        pci->potear1 = 0x00000000;
+        pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
+        /* Enable, Mem R/W */
+        pci->powar1 = 0x80044000 |
+           (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
+
+        /* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
+        pci->potar2 = 0x00000000;
+        pci->potear2 = 0x00000000;
+        pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
+        /* Enable, IO R/W */
+        pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
+
+        /* Setup 2G inbound Memory Window @ 0 */
+        pci->pitar1 = 0x00000000;
+        pci->piwbar1 = 0x00000000;
+        pci->piwar1 = 0xa0f5501e;       /* Enable, Prefetch, Local
+                                           Mem, Snoop R/W, 2G */
+}
+
+
+extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin);
+extern int mpc85xx_exclude_device(u_char bus, u_char devfn);
+
+#ifdef CONFIG_85xx_PCI2
+static void __init
+mpc85xx_setup_pci2(struct pci_controller *hose)
+{
+        volatile struct ccsr_pci *pci;
+        unsigned short temps;
+        bd_t *binfo = (bd_t *) __res;
+
+        pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET,
+                    MPC85xx_PCI2_SIZE);
+
+        early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps);
+        temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+        early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps);
+        early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80);
+
+        /* Disable all windows (except powar0 since its ignored) */
+        pci->powar1 = 0;
+        pci->powar2 = 0;
+        pci->powar3 = 0;
+        pci->powar4 = 0;
+        pci->piwar1 = 0;
+        pci->piwar2 = 0;
+        pci->piwar3 = 0;
+
+        /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */
+        pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
+        pci->potear1 = 0x00000000;
+        pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
+        /* Enable, Mem R/W */
+        pci->powar1 = 0x80044000 |
+           (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
+
+        /* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
+        pci->potar2 = 0x00000000;
+        pci->potear2 = 0x00000000;
+        pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
+        /* Enable, IO R/W */
+        pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
+
+        /* Setup 2G inbound Memory Window @ 0 */
+        pci->pitar1 = 0x00000000;
+        pci->piwbar1 = 0x00000000;
+        pci->piwar1 = 0xa0f5501e;       /* Enable, Prefetch, Local
+                                           Mem, Snoop R/W, 2G */
+}
+#endif /* CONFIG_85xx_PCI2 */
+
+int mpc85xx_pci1_last_busno = 0;
+
+void __init
+mpc85xx_setup_hose(void)
+{
+        struct pci_controller *hose_a;
+#ifdef CONFIG_85xx_PCI2
+        struct pci_controller *hose_b;
+#endif
+        bd_t *binfo = (bd_t *) __res;
+
+        hose_a = pcibios_alloc_controller();
+
+        if (!hose_a)
+                return;
+
+        ppc_md.pci_swizzle = common_swizzle;
+        ppc_md.pci_map_irq = mpc85xx_map_irq;
+
+        hose_a->first_busno = 0;
+        hose_a->bus_offset = 0;
+        hose_a->last_busno = 0xff;
+
+        setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
+                           binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
+        hose_a->set_cfg_type = 1;
+
+        mpc85xx_setup_pci1(hose_a);
+
+        hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET;
+        hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM;
+        hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM;
+
+        hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO;
+        hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO;
+        hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE;
+#ifdef CONFIG_85xx_PCI2
+        isa_io_base =
+                (unsigned long) ioremap(MPC85XX_PCI1_IO_BASE,
+                                        MPC85XX_PCI1_IO_SIZE +
+                                        MPC85XX_PCI2_IO_SIZE);
+#else
+        isa_io_base =
+                (unsigned long) ioremap(MPC85XX_PCI1_IO_BASE,
+                                        MPC85XX_PCI1_IO_SIZE);
+#endif
+        hose_a->io_base_virt = (void *) isa_io_base;
+
+        /* setup resources */
+        pci_init_resource(&hose_a->mem_resources[0],
+                        MPC85XX_PCI1_LOWER_MEM,
+                        MPC85XX_PCI1_UPPER_MEM,
+                        IORESOURCE_MEM, "PCI1 host bridge");
+
+        pci_init_resource(&hose_a->io_resource,
+                        MPC85XX_PCI1_LOWER_IO,
+                        MPC85XX_PCI1_UPPER_IO,
+                        IORESOURCE_IO, "PCI1 host bridge");
+
+        ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+
+        hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
+
+#ifdef CONFIG_85xx_PCI2
+        hose_b = pcibios_alloc_controller();
+
+        if (!hose_b)
+                return;
+
+        hose_b->bus_offset = hose_a->last_busno + 1;
+        hose_b->first_busno = hose_a->last_busno + 1;
+        hose_b->last_busno = 0xff;
+
+        setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
+                           binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
+        hose_b->set_cfg_type = 1;
+
+        mpc85xx_setup_pci2(hose_b);
+
+        hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET;
+        hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM;
+        hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM;
+
+        hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO;
+        hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO;
+        hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE;
+        hose_b->io_base_virt = (void *) isa_io_base + MPC85XX_PCI1_IO_SIZE;
+
+        /* setup resources */
+        pci_init_resource(&hose_b->mem_resources[0],
+                        MPC85XX_PCI2_LOWER_MEM,
+                        MPC85XX_PCI2_UPPER_MEM,
+                        IORESOURCE_MEM, "PCI2 host bridge");
+
+        pci_init_resource(&hose_b->io_resource,
+                        MPC85XX_PCI2_LOWER_IO,
+                        MPC85XX_PCI2_UPPER_IO,
+                        IORESOURCE_IO, "PCI2 host bridge");
+
+        hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno);
+
+        /* let board code know what the last bus number was on PCI1 */
+        mpc85xx_pci1_last_busno = hose_a->last_busno;
+#endif
+        return;
+}
+#endif /* CONFIG_PCI */
+
+