Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 74 insertions, 0 deletions

diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h
new file mode 100644
index 000000000000..7bcc6c35a417
--- /dev/null
+++ b/arch/ppc/platforms/85xx/stx_gp3.h
@@ -0,0 +1,74 @@
+/*
+ * arch/ppc/platforms/stx8560_gp3.h
+ *
+ * STx GP3 board definitions
+ *
+ * Dan Malek (dan@embeddededge.com)
+ * Copyright 2004 Embedded Edge, LLC
+ *
+ * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_STX_GP3_H
+#define __MACH_STX_GP3_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <asm/ppcboot.h>
+
+#define BOARD_CCSRBAR           ((uint)0xe0000000)
+#define CCSRBAR_SIZE            ((uint)1024*1024)
+
+#define CPM_MAP_ADDR            (CCSRBAR + MPC85xx_CPM_OFFSET)
+
+#define BCSR_ADDR               ((uint)0xfc000000)
+#define BCSR_SIZE               ((uint)(16 * 1024))
+
+#define BCSR_TSEC1_RESET        0x00000080
+#define BCSR_TSEC2_RESET        0x00000040
+#define BCSR_LED1               0x00000008
+#define BCSR_LED2               0x00000004
+#define BCSR_LED3               0x00000002
+#define BCSR_LED4               0x00000001
+
+extern void mpc85xx_setup_hose(void) __init;
+extern void mpc85xx_restart(char *cmd);
+extern void mpc85xx_power_off(void);
+extern void mpc85xx_halt(void);
+extern int mpc85xx_show_cpuinfo(struct seq_file *m);
+extern void mpc85xx_init_IRQ(void) __init;
+extern unsigned long mpc85xx_find_end_of_memory(void) __init;
+extern void mpc85xx_calibrate_decr(void) __init;
+
+#define PCI_CFG_ADDR_OFFSET     (0x8000)
+#define PCI_CFG_DATA_OFFSET     (0x8004)
+
+/* PCI interrupt controller */
+#define PIRQA           MPC85xx_IRQ_EXT1
+#define PIRQB           MPC85xx_IRQ_EXT2
+#define PIRQC           MPC85xx_IRQ_EXT3
+#define PIRQD           MPC85xx_IRQ_EXT4
+#define PCI_MIN_IDSEL   16
+#define PCI_MAX_IDSEL   19
+#define PCI_IRQ_SLOT    4
+
+#define MPC85XX_PCI1_LOWER_IO   0x00000000
+#define MPC85XX_PCI1_UPPER_IO   0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM  0x80000000
+#define MPC85XX_PCI1_UPPER_MEM  0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE    0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE    0x01000000
+
+#endif /* __MACH_STX_GP3_H */