powerpc/QE: switch to the cpm_muram implementation

This is very trivial patch. We're transitioning to the cpm_muram_*
calls. That's it.

Less trivial changes:
- BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines
  we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_*
  prototypes;
- qe_muram_dump was unused and thus removed;
- added some code to the cpm_common.c to support legacy QE bindings
  (data-only node name).
- For convenience, define qe_* calls to cpm_*. So drivers need not to be
  changed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

3 files changed, 14 insertions, 95 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 2bfbb39380e9..16a0ed28eb00 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -42,6 +42,7 @@ endif
 ifeq ($(ARCH),powerpc)
 obj-$(CONFIG_CPM)               += cpm_common.o
 obj-$(CONFIG_CPM2)              += cpm2.o cpm2_pic.o
+obj-$(CONFIG_QUICC_ENGINE)      += cpm_common.o
 obj-$(CONFIG_PPC_DCR)           += dcr.o
 obj-$(CONFIG_8xx)               += mpc8xx_pic.o cpm1.o
 obj-$(CONFIG_UCODE_PATCH)       += micropatch.o
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index cb7df2dce44f..9b75d164bdf9 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -85,9 +85,13 @@ int __init cpm_muram_init(void)
 
         np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
         if (!np) {
-                printk(KERN_ERR "Cannot find CPM muram data node");
-                ret = -ENODEV;
-                goto out;
+                /* try legacy bindings */
+                np = of_find_node_by_name(NULL, "data-only");
+                if (!np) {
+                        printk(KERN_ERR "Cannot find CPM muram data node");
+                        ret = -ENODEV;
+                        goto out;
+                }
         }
 
         muram_pbase = of_translate_address(np, zero);
@@ -189,6 +193,12 @@ void __iomem *cpm_muram_addr(unsigned long offset)
 }
 EXPORT_SYMBOL(cpm_muram_addr);
 
+unsigned long cpm_muram_offset(void __iomem *addr)
+{
+        return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(cpm_muram_offset);
+
 /**
  * cpm_muram_dma - turn a muram virtual address into a DMA address
  * @offset: virtual address from cpm_muram_addr() to convert
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index cff550eec7e8..28e05df952de 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -35,7 +35,6 @@
 #include <asm/rheap.h>
 
 static void qe_snums_init(void);
-static void qe_muram_init(void);
 static int qe_sdma_init(void);
 
 static DEFINE_SPINLOCK(qe_lock);
@@ -325,97 +324,6 @@ static int qe_sdma_init(void)
         return 0;
 }
 
-/*
- * muram_alloc / muram_free bits.
- */
-static DEFINE_SPINLOCK(qe_muram_lock);
-
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t qe_boot_muram_rh_block[16];
-static rh_info_t qe_muram_info;
-
-static void qe_muram_init(void)
-{
-        struct device_node *np;
-        const u32 *address;
-        u64 size;
-        unsigned int flags;
-
-        /* initialize the info header */
-        rh_init(&qe_muram_info, 1,
-                sizeof(qe_boot_muram_rh_block) /
-                sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
-
-        /* Attach the usable muram area */
-        /* XXX: This is a subset of the available muram. It
-         * varies with the processor and the microcode patches activated.
-         */
-        np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
-        if (!np) {
-                np = of_find_node_by_name(NULL, "data-only");
-                if (!np) {
-                        WARN_ON(1);
-                        return;
-                }
-        }
-
-        address = of_get_address(np, 0, &size, &flags);
-        WARN_ON(!address);
-
-        of_node_put(np);
-        if (address)
-                rh_attach_region(&qe_muram_info, *address, (int)size);
-}
-
-/* This function returns an index into the MURAM area.
- */
-unsigned long qe_muram_alloc(int size, int align)
-{
-        unsigned long start;
-        unsigned long flags;
-
-        spin_lock_irqsave(&qe_muram_lock, flags);
-        start = rh_alloc_align(&qe_muram_info, size, align, "QE");
-        spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-        return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc);
-
-int qe_muram_free(unsigned long offset)
-{
-        int ret;
-        unsigned long flags;
-
-        spin_lock_irqsave(&qe_muram_lock, flags);
-        ret = rh_free(&qe_muram_info, offset);
-        spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-        return ret;
-}
-EXPORT_SYMBOL(qe_muram_free);
-
-/* not sure if this is ever needed */
-unsigned long qe_muram_alloc_fixed(unsigned long offset, int size)
-{
-        unsigned long start;
-        unsigned long flags;
-
-        spin_lock_irqsave(&qe_muram_lock, flags);
-        start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
-        spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-        return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc_fixed);
-
-void qe_muram_dump(void)
-{
-        rh_dump(&qe_muram_info);
-}
-EXPORT_SYMBOL(qe_muram_dump);
-
 /* The maximum number of RISCs we support */
 #define MAX_QE_RISC     2