Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:
 "Some nice cleanups like removing bootmem, and removal of
  __get_cpu_var().

  There is one patch to mm/gup.c.  This is the generic GUP
  implementation, but is only used by us and arm(64).  We have an ack
  from Steve Capper, and although we didn't get an ack from Andrew he
  told us to take the patch through the powerpc tree.

  There's one cxl patch.  This is in drivers/misc, but Greg said he was
  happy for us to manage fixes for it.

  There is an infrastructure patch to support an IPMI driver for OPAL.

  There is also an RTC driver for OPAL.  We weren't able to get any
  response from the RTC maintainer, Alessandro Zummo, so in the end we
  just merged the driver.

  The usual batch of Freescale updates from Scott"

* tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits)
  powerpc/powernv: Return to cpu offline loop when finished in KVM guest
  powerpc/book3s: Fix partial invalidation of TLBs in MCE code.
  powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
  powerpc/xmon: Cleanup the breakpoint flags
  powerpc/xmon: Enable HW instruction breakpoint on POWER8
  powerpc/mm/thp: Use tlbiel if possible
  powerpc/mm/thp: Remove code duplication
  powerpc/mm/hugetlb: Sanity check gigantic hugepage count
  powerpc/oprofile: Disable pagefaults during user stack read
  powerpc/mm: Check for matching hpte without taking hpte lock
  powerpc: Drop useless warning in eeh_init()
  powerpc/powernv: Cleanup unused MCE definitions/declarations.
  powerpc/eeh: Dump PHB diag-data early
  powerpc/eeh: Recover EEH error on ownership change for BCM5719
  powerpc/eeh: Set EEH_PE_RESET on PE reset
  powerpc/eeh: Refactor eeh_reset_pe()
  powerpc: Remove more traces of bootmem
  powerpc/pseries: Initialise nvram_pstore_info's buf_lock
  cxl: Name interrupts in /proc/interrupt
  cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  ...

17 files changed, 126 insertions, 22 deletions

diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 7aed8d0876b7..d09f4fa2c3d1 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -13,7 +13,6 @@
  *
  */
 #include <linux/irq.h>
-#include <linux/bootmem.h>
 #include <linux/msi.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 65d2ed4549e6..6455c1eada1a 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,7 +23,6 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/bootmem.h>
 #include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
@@ -152,7 +151,7 @@ static int setup_one_atmu(struct ccsr_pci __iomem *pci,
                 flags |= 0x10000000; /* enable relaxed ordering */
 
         for (i = 0; size > 0; i++) {
-                unsigned int bits = min(ilog2(size),
+                unsigned int bits = min_t(u32, ilog2(size),
                                         __ffs(pci_addr | phys_addr));
 
                 if (index + i >= 5)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index c04b718307c8..08d60f183dad 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -58,6 +58,19 @@
 #define RIO_ISR_AACR            0x10120
 #define RIO_ISR_AACR_AA         0x1     /* Accept All ID */
 
+#define RIWTAR_TRAD_VAL_SHIFT   12
+#define RIWTAR_TRAD_MASK        0x00FFFFFF
+#define RIWBAR_BADD_VAL_SHIFT   12
+#define RIWBAR_BADD_MASK        0x003FFFFF
+#define RIWAR_ENABLE            0x80000000
+#define RIWAR_TGINT_LOCAL       0x00F00000
+#define RIWAR_RDTYP_NO_SNOOP    0x00040000
+#define RIWAR_RDTYP_SNOOP       0x00050000
+#define RIWAR_WRTYP_NO_SNOOP    0x00004000
+#define RIWAR_WRTYP_SNOOP       0x00005000
+#define RIWAR_WRTYP_ALLOC       0x00006000
+#define RIWAR_SIZE_MASK         0x0000003F
+
 #define __fsl_read_rio_config(x, addr, err, op)         \
         __asm__ __volatile__(                           \
                 "1:     "op" %1,0(%2)\n"                \
@@ -266,6 +279,89 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
         return 0;
 }
 
+static void fsl_rio_inbound_mem_init(struct rio_priv *priv)
+{
+        int i;
+
+        /* close inbound windows */
+        for (i = 0; i < RIO_INB_ATMU_COUNT; i++)
+                out_be32(&priv->inb_atmu_regs[i].riwar, 0);
+}
+
+int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+        u64 rstart, u32 size, u32 flags)
+{
+        struct rio_priv *priv = mport->priv;
+        u32 base_size;
+        unsigned int base_size_log;
+        u64 win_start, win_end;
+        u32 riwar;
+        int i;
+
+        if ((size & (size - 1)) != 0)
+                return -EINVAL;
+
+        base_size_log = ilog2(size);
+        base_size = 1 << base_size_log;
+
+        /* check if addresses are aligned with the window size */
+        if (lstart & (base_size - 1))
+                return -EINVAL;
+        if (rstart & (base_size - 1))
+                return -EINVAL;
+
+        /* check for conflicting ranges */
+        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+                if ((riwar & RIWAR_ENABLE) == 0)
+                        continue;
+                win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK))
+                        << RIWBAR_BADD_VAL_SHIFT;
+                win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1);
+                if (rstart < win_end && (rstart + size) > win_start)
+                        return -EINVAL;
+        }
+
+        /* find unused atmu */
+        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+                if ((riwar & RIWAR_ENABLE) == 0)
+                        break;
+        }
+        if (i >= RIO_INB_ATMU_COUNT)
+                return -ENOMEM;
+
+        out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT);
+        out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT);
+        out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL |
+                RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1));
+
+        return 0;
+}
+
+void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
+{
+        u32 win_start_shift, base_start_shift;
+        struct rio_priv *priv = mport->priv;
+        u32 riwar, riwtar;
+        int i;
+
+        /* skip default window */
+        base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT;
+        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
+                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
+                if ((riwar & RIWAR_ENABLE) == 0)
+                        continue;
+
+                riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar);
+                win_start_shift = riwtar & RIWTAR_TRAD_MASK;
+                if (win_start_shift == base_start_shift) {
+                        out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE);
+                        return;
+                }
+        }
+}
+
 void fsl_rio_port_error_handler(int offset)
 {
         /*XXX: Error recovery is not implemented, we just clear errors */
@@ -389,6 +485,8 @@ int fsl_rio_setup(struct platform_device *dev)
         ops->add_outb_message = fsl_add_outb_message;
         ops->add_inb_buffer = fsl_add_inb_buffer;
         ops->get_inb_message = fsl_get_inb_message;
+        ops->map_inb = fsl_map_inb_mem;
+        ops->unmap_inb = fsl_unmap_inb_mem;
 
         rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
         if (!rmu_node) {
@@ -602,6 +700,11 @@ int fsl_rio_setup(struct platform_device *dev)
                         RIO_ATMU_REGS_PORT2_OFFSET));
 
                 priv->maint_atmu_regs = priv->atmu_regs + 1;
+                priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *)
+                        (priv->regs_win +
+                        ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET :
+                        RIO_INB_ATMU_REGS_PORT2_OFFSET));
+
 
                 /* Set to receive any dist ID for serial RapidIO controller. */
                 if (port->phy_type == RIO_PHY_SERIAL)
@@ -620,6 +723,7 @@ int fsl_rio_setup(struct platform_device *dev)
                 rio_law_start = range_start;
 
                 fsl_rio_setup_rmu(port, rmu_np[i]);
+                fsl_rio_inbound_mem_init(priv);
 
                 dbell->mport[i] = port;
 
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
index ae8e27405a0d..d53407a34f32 100644
--- a/arch/powerpc/sysdev/fsl_rio.h
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -50,9 +50,12 @@
 #define RIO_S_DBELL_REGS_OFFSET 0x13400
 #define RIO_S_PW_REGS_OFFSET    0x134e0
 #define RIO_ATMU_REGS_DBELL_OFFSET      0x10C40
+#define RIO_INB_ATMU_REGS_PORT1_OFFSET 0x10d60
+#define RIO_INB_ATMU_REGS_PORT2_OFFSET 0x10f60
 
 #define MAX_MSG_UNIT_NUM        2
 #define MAX_PORT_NUM            4
+#define RIO_INB_ATMU_COUNT      4
 
 struct rio_atmu_regs {
          u32 rowtar;
@@ -63,6 +66,15 @@ struct rio_atmu_regs {
          u32 pad2[3];
 };
 
+struct rio_inb_atmu_regs {
+        u32 riwtar;
+        u32 pad1;
+        u32 riwbar;
+        u32 pad2;
+        u32 riwar;
+        u32 pad3[3];
+};
+
 struct rio_dbell_ring {
         void *virt;
         dma_addr_t phys;
@@ -99,6 +111,7 @@ struct rio_priv {
         void __iomem *regs_win;
         struct rio_atmu_regs __iomem *atmu_regs;
         struct rio_atmu_regs __iomem *maint_atmu_regs;
+        struct rio_inb_atmu_regs __iomem *inb_atmu_regs;
         void __iomem *maint_win;
         void *rmm_handle; /* RapidIO message manager(unit) Handle */
 };
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ffd1169ebaab..99269c041615 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -197,8 +197,7 @@ static int __init setup_rstcr(void)
         if (!rstcr && ppc_md.restart == fsl_rstcr_restart)
                 printk(KERN_ERR "No RSTCR register, warm reboot won't work\n");
 
-        if (np)
-                of_node_put(np);
+        of_node_put(np);
 
         return 0;
 }
@@ -238,7 +237,7 @@ void fsl_hv_restart(char *cmd)
 /*
  * Halt the current partition
  *
- * This function should be assigned to the ppc_md.power_off and ppc_md.halt
+ * This function should be assigned to the pm_power_off and ppc_md.halt
  * function pointers, to shut down the partition when we're running under
  * the Freescale hypervisor.
  */
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index b50f97811c25..b28733727ed3 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -20,7 +20,6 @@
 #include <linux/signal.h>
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
-#include <linux/bootmem.h>
 #include <linux/spinlock.h>
 #include <linux/fsl_devices.h>
 #include <asm/irq.h>
diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c
index 5492dc5f56f4..f4f0301b9a60 100644
--- a/arch/powerpc/sysdev/mpc5xxx_clocks.c
+++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c
@@ -26,8 +26,7 @@ unsigned long mpc5xxx_get_bus_frequency(struct device_node *node)
                 of_node_put(node);
                 node = np;
         }
-        if (node)
-                of_node_put(node);
+        of_node_put(node);
 
         return p_bus_freq ? *p_bus_freq : 0;
 }
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 89cec0ed6a58..c4648ad5c1f3 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -24,7 +24,6 @@
 #include <linux/irq.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
-#include <linux/bootmem.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 45c114bc430b..a3f660eed6de 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -16,7 +16,6 @@
 #undef DEBUG
 
 #include <linux/irq.h>
-#include <linux/bootmem.h>
 #include <linux/msi.h>
 #include <asm/mpic.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 0dff1cd44481..b2cef1809389 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/irq.h>
-#include <linux/bootmem.h>
 #include <linux/msi.h>
 #include <asm/mpic.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/sysdev/ppc4xx_cpm.c b/arch/powerpc/sysdev/ppc4xx_cpm.c
index 82e2cfe35c62..ba95adf81d8d 100644
--- a/arch/powerpc/sysdev/ppc4xx_cpm.c
+++ b/arch/powerpc/sysdev/ppc4xx_cpm.c
@@ -281,7 +281,7 @@ static int __init cpm_init(void)
                 printk(KERN_ERR "cpm: could not parse dcr property for %s\n",
                        np->full_name);
                 ret = -EINVAL;
-                goto out;
+                goto node_put;
         }
 
         cpm.dcr_host = dcr_map(np, dcr_base, dcr_len);
@@ -290,7 +290,7 @@ static int __init cpm_init(void)
                 printk(KERN_ERR "cpm: failed to map dcr property for %s\n",
                        np->full_name);
                 ret = -EINVAL;
-                goto out;
+                goto node_put;
         }
 
         /* All 4xx SoCs with a CPM controller have one of two
@@ -330,9 +330,9 @@ static int __init cpm_init(void)
 
         if (cpm.standby || cpm.suspend)
                 suspend_set_ops(&cpm_suspend_ops);
+node_put:
+        of_node_put(np);
 out:
-        if (np)
-                of_node_put(np);
         return ret;
 }
 
diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
index 518eabbe0bdc..5e622c0544c4 100644
--- a/arch/powerpc/sysdev/ppc4xx_msi.c
+++ b/arch/powerpc/sysdev/ppc4xx_msi.c
@@ -22,7 +22,6 @@
  */
 
 #include <linux/irq.h>
-#include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/msi.h>
 #include <linux/of_platform.h>
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index df6e2fc4ff92..086aca69ecae 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -22,7 +22,6 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/of.h>
-#include <linux/bootmem.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 238a07b97f2c..b584debbcd9c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -22,7 +22,6 @@
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index b2b87c30e266..543765e1ef14 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -23,7 +23,6 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/device.h>
-#include <linux/bootmem.h>
 #include <linux/spinlock.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 92033936a8f7..7c37157d4c24 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -19,7 +19,6 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/device.h>
-#include <linux/bootmem.h>
 #include <linux/spinlock.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index fe0cca477164..365249cd346b 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -155,7 +155,7 @@ int __init xics_smp_probe(void)
 
 void xics_teardown_cpu(void)
 {
-        struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+        struct xics_cppr *os_cppr = this_cpu_ptr(&xics_cppr);
 
         /*
          * we have to reset the cppr index to 0 because we're