powerpc: Merge remaining RTAS code

This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since
cell wants them as well as pseries (and chrp can use rtas-proc.c too,
at least in principle).  rtas_fw.c is gone, with its bits moved into
rtas_flash.c and rtas.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>

4 files changed, 531 insertions, 13 deletions

diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 2d57f588151d..e3fc3407bb1f 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -21,15 +21,6 @@ config EEH
         depends on PPC_PSERIES
         default y if !EMBEDDED
 
-config RTAS_PROC
-        bool "Proc interface to RTAS"
-        depends on PPC_RTAS
-        default y
-
-config RTAS_FLASH
-        tristate "Firmware flash interface"
-        depends on PPC64 && RTAS_PROC
-
 config SCANLOG
         tristate "Scanlog dump interface"
         depends on RTAS_PROC && PPC_PSERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 91909a844736..b9938fece781 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -1,5 +1,5 @@
 obj-y                   := pci.o lpar.o hvCall.o nvram.o reconfig.o \
-                           setup.o iommu.o ras.o
+                           setup.o iommu.o ras.o rtasd.o
 obj-$(CONFIG_SMP)       += smp.o
 obj-$(CONFIG_IBMVIO)    += vio.o
 obj-$(CONFIG_XICS)      += xics.o
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
new file mode 100644
index 000000000000..e26b0420b6dd
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -0,0 +1,527 @@
+/*
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Communication to userspace based on kernel/printk.c
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/rtas.h>
+#include <asm/prom.h>
+#include <asm/nvram.h>
+#include <asm/atomic.h>
+#include <asm/systemcfg.h>
+
+#if 0
+#define DEBUG(A...)     printk(KERN_ERR A)
+#else
+#define DEBUG(A...)
+#endif
+
+static DEFINE_SPINLOCK(rtasd_log_lock);
+
+DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
+
+static char *rtas_log_buf;
+static unsigned long rtas_log_start;
+static unsigned long rtas_log_size;
+
+static int surveillance_timeout = -1;
+static unsigned int rtas_event_scan_rate;
+static unsigned int rtas_error_log_max;
+static unsigned int rtas_error_log_buffer_max;
+
+static int full_rtas_msgs = 0;
+
+extern int no_logging;
+
+volatile int error_log_cnt = 0;
+
+/*
+ * Since we use 32 bit RTAS, the physical address of this must be below
+ * 4G or else bad things happen. Allocate this in the kernel data and
+ * make it big enough.
+ */
+static unsigned char logdata[RTAS_ERROR_LOG_MAX];
+
+static int get_eventscan_parms(void);
+
+static char *rtas_type[] = {
+        "Unknown", "Retry", "TCE Error", "Internal Device Failure",
+        "Timeout", "Data Parity", "Address Parity", "Cache Parity",
+        "Address Invalid", "ECC Uncorrected", "ECC Corrupted",
+};
+
+static char *rtas_event_type(int type)
+{
+        if ((type > 0) && (type < 11))
+                return rtas_type[type];
+
+        switch (type) {
+                case RTAS_TYPE_EPOW:
+                        return "EPOW";
+                case RTAS_TYPE_PLATFORM:
+                        return "Platform Error";
+                case RTAS_TYPE_IO:
+                        return "I/O Event";
+                case RTAS_TYPE_INFO:
+                        return "Platform Information Event";
+                case RTAS_TYPE_DEALLOC:
+                        return "Resource Deallocation Event";
+                case RTAS_TYPE_DUMP:
+                        return "Dump Notification Event";
+        }
+
+        return rtas_type[0];
+}
+
+/* To see this info, grep RTAS /var/log/messages and each entry
+ * will be collected together with obvious begin/end.
+ * There will be a unique identifier on the begin and end lines.
+ * This will persist across reboots.
+ *
+ * format of error logs returned from RTAS:
+ * bytes        (size)  : contents
+ * --------------------------------------------------------
+ * 0-7          (8)     : rtas_error_log
+ * 8-47         (40)    : extended info
+ * 48-51        (4)     : vendor id
+ * 52-1023 (vendor specific) : location code and debug data
+ */
+static void printk_log_rtas(char *buf, int len)
+{
+
+        int i,j,n = 0;
+        int perline = 16;
+        char buffer[64];
+        char * str = "RTAS event";
+
+        if (full_rtas_msgs) {
+                printk(RTAS_DEBUG "%d -------- %s begin --------\n",
+                       error_log_cnt, str);
+
+                /*
+                 * Print perline bytes on each line, each line will start
+                 * with RTAS and a changing number, so syslogd will
+                 * print lines that are otherwise the same.  Separate every
+                 * 4 bytes with a space.
+                 */
+                for (i = 0; i < len; i++) {
+                        j = i % perline;
+                        if (j == 0) {
+                                memset(buffer, 0, sizeof(buffer));
+                                n = sprintf(buffer, "RTAS %d:", i/perline);
+                        }
+
+                        if ((i % 4) == 0)
+                                n += sprintf(buffer+n, " ");
+
+                        n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]);
+
+                        if (j == (perline-1))
+                                printk(KERN_DEBUG "%s\n", buffer);
+                }
+                if ((i % perline) != 0)
+                        printk(KERN_DEBUG "%s\n", buffer);
+
+                printk(RTAS_DEBUG "%d -------- %s end ----------\n",
+                       error_log_cnt, str);
+        } else {
+                struct rtas_error_log *errlog = (struct rtas_error_log *)buf;
+
+                printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n",
+                       error_log_cnt, rtas_event_type(errlog->type),
+                       errlog->severity);
+        }
+}
+
+static int log_rtas_len(char * buf)
+{
+        int len;
+        struct rtas_error_log *err;
+
+        /* rtas fixed header */
+        len = 8;
+        err = (struct rtas_error_log *)buf;
+        if (err->extended_log_length) {
+
+                /* extended header */
+                len += err->extended_log_length;
+        }
+
+        if (rtas_error_log_max == 0) {
+                get_eventscan_parms();
+        }
+        if (len > rtas_error_log_max)
+                len = rtas_error_log_max;
+
+        return len;
+}
+
+/*
+ * First write to nvram, if fatal error, that is the only
+ * place we log the info.  The error will be picked up
+ * on the next reboot by rtasd.  If not fatal, run the
+ * method for the type of error.  Currently, only RTAS
+ * errors have methods implemented, but in the future
+ * there might be a need to store data in nvram before a
+ * call to panic().
+ *
+ * XXX We write to nvram periodically, to indicate error has
+ * been written and sync'd, but there is a possibility
+ * that if we don't shutdown correctly, a duplicate error
+ * record will be created on next reboot.
+ */
+void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
+{
+        unsigned long offset;
+        unsigned long s;
+        int len = 0;
+
+        DEBUG("logging event\n");
+        if (buf == NULL)
+                return;
+
+        spin_lock_irqsave(&rtasd_log_lock, s);
+
+        /* get length and increase count */
+        switch (err_type & ERR_TYPE_MASK) {
+        case ERR_TYPE_RTAS_LOG:
+                len = log_rtas_len(buf);
+                if (!(err_type & ERR_FLAG_BOOT))
+                        error_log_cnt++;
+                break;
+        case ERR_TYPE_KERNEL_PANIC:
+        default:
+                spin_unlock_irqrestore(&rtasd_log_lock, s);
+                return;
+        }
+
+        /* Write error to NVRAM */
+        if (!no_logging && !(err_type & ERR_FLAG_BOOT))
+                nvram_write_error_log(buf, len, err_type);
+
+        /*
+         * rtas errors can occur during boot, and we do want to capture
+         * those somewhere, even if nvram isn't ready (why not?), and even
+         * if rtasd isn't ready. Put them into the boot log, at least.
+         */
+        if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG)
+                printk_log_rtas(buf, len);
+
+        /* Check to see if we need to or have stopped logging */
+        if (fatal || no_logging) {
+                no_logging = 1;
+                spin_unlock_irqrestore(&rtasd_log_lock, s);
+                return;
+        }
+
+        /* call type specific method for error */
+        switch (err_type & ERR_TYPE_MASK) {
+        case ERR_TYPE_RTAS_LOG:
+                offset = rtas_error_log_buffer_max *
+                        ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK);
+
+                /* First copy over sequence number */
+                memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int));
+
+                /* Second copy over error log data */
+                offset += sizeof(int);
+                memcpy(&rtas_log_buf[offset], buf, len);
+
+                if (rtas_log_size < LOG_NUMBER)
+                        rtas_log_size += 1;
+                else
+                        rtas_log_start += 1;
+
+                spin_unlock_irqrestore(&rtasd_log_lock, s);
+                wake_up_interruptible(&rtas_log_wait);
+                break;
+        case ERR_TYPE_KERNEL_PANIC:
+        default:
+                spin_unlock_irqrestore(&rtasd_log_lock, s);
+                return;
+        }
+
+}
+
+
+static int rtas_log_open(struct inode * inode, struct file * file)
+{
+        return 0;
+}
+
+static int rtas_log_release(struct inode * inode, struct file * file)
+{
+        return 0;
+}
+
+/* This will check if all events are logged, if they are then, we
+ * know that we can safely clear the events in NVRAM.
+ * Next we'll sit and wait for something else to log.
+ */
+static ssize_t rtas_log_read(struct file * file, char __user * buf,
+                         size_t count, loff_t *ppos)
+{
+        int error;
+        char *tmp;
+        unsigned long s;
+        unsigned long offset;
+
+        if (!buf || count < rtas_error_log_buffer_max)
+                return -EINVAL;
+
+        count = rtas_error_log_buffer_max;
+
+        if (!access_ok(VERIFY_WRITE, buf, count))
+                return -EFAULT;
+
+        tmp = kmalloc(count, GFP_KERNEL);
+        if (!tmp)
+                return -ENOMEM;
+
+
+        spin_lock_irqsave(&rtasd_log_lock, s);
+        /* if it's 0, then we know we got the last one (the one in NVRAM) */
+        if (rtas_log_size == 0 && !no_logging)
+                nvram_clear_error_log();
+        spin_unlock_irqrestore(&rtasd_log_lock, s);
+
+
+        error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
+        if (error)
+                goto out;
+
+        spin_lock_irqsave(&rtasd_log_lock, s);
+        offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
+        memcpy(tmp, &rtas_log_buf[offset], count);
+
+        rtas_log_start += 1;
+        rtas_log_size -= 1;
+        spin_unlock_irqrestore(&rtasd_log_lock, s);
+
+        error = copy_to_user(buf, tmp, count) ? -EFAULT : count;
+out:
+        kfree(tmp);
+        return error;
+}
+
+static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
+{
+        poll_wait(file, &rtas_log_wait, wait);
+        if (rtas_log_size)
+                return POLLIN | POLLRDNORM;
+        return 0;
+}
+
+struct file_operations proc_rtas_log_operations = {
+        .read =         rtas_log_read,
+        .poll =         rtas_log_poll,
+        .open =         rtas_log_open,
+        .release =      rtas_log_release,
+};
+
+static int enable_surveillance(int timeout)
+{
+        int error;
+
+        error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout);
+
+        if (error == 0)
+                return 0;
+
+        if (error == -EINVAL) {
+                printk(KERN_INFO "rtasd: surveillance not supported\n");
+                return 0;
+        }
+
+        printk(KERN_ERR "rtasd: could not update surveillance\n");
+        return -1;
+}
+
+static int get_eventscan_parms(void)
+{
+        struct device_node *node;
+        int *ip;
+
+        node = of_find_node_by_path("/rtas");
+
+        ip = (int *)get_property(node, "rtas-event-scan-rate", NULL);
+        if (ip == NULL) {
+                printk(KERN_ERR "rtasd: no rtas-event-scan-rate\n");
+                of_node_put(node);
+                return -1;
+        }
+        rtas_event_scan_rate = *ip;
+        DEBUG("rtas-event-scan-rate %d\n", rtas_event_scan_rate);
+
+        /* Make room for the sequence number */
+        rtas_error_log_max = rtas_get_error_log_max();
+        rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
+
+        of_node_put(node);
+
+        return 0;
+}
+
+static void do_event_scan(int event_scan)
+{
+        int error;
+        do {
+                memset(logdata, 0, rtas_error_log_max);
+                error = rtas_call(event_scan, 4, 1, NULL,
+                                  RTAS_EVENT_SCAN_ALL_EVENTS, 0,
+                                  __pa(logdata), rtas_error_log_max);
+                if (error == -1) {
+                        printk(KERN_ERR "event-scan failed\n");
+                        break;
+                }
+
+                if (error == 0)
+                        pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0);
+
+        } while(error == 0);
+}
+
+static void do_event_scan_all_cpus(long delay)
+{
+        int cpu;
+
+        lock_cpu_hotplug();
+        cpu = first_cpu(cpu_online_map);
+        for (;;) {
+                set_cpus_allowed(current, cpumask_of_cpu(cpu));
+                do_event_scan(rtas_token("event-scan"));
+                set_cpus_allowed(current, CPU_MASK_ALL);
+
+                /* Drop hotplug lock, and sleep for the specified delay */
+                unlock_cpu_hotplug();
+                msleep_interruptible(delay);
+                lock_cpu_hotplug();
+
+                cpu = next_cpu(cpu, cpu_online_map);
+                if (cpu == NR_CPUS)
+                        break;
+        }
+        unlock_cpu_hotplug();
+}
+
+static int rtasd(void *unused)
+{
+        unsigned int err_type;
+        int event_scan = rtas_token("event-scan");
+        int rc;
+
+        daemonize("rtasd");
+
+        if (event_scan == RTAS_UNKNOWN_SERVICE || get_eventscan_parms() == -1)
+                goto error;
+
+        rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER);
+        if (!rtas_log_buf) {
+                printk(KERN_ERR "rtasd: no memory\n");
+                goto error;
+        }
+
+        printk(KERN_INFO "RTAS daemon started\n");
+
+        DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate));
+
+        /* See if we have any error stored in NVRAM */
+        memset(logdata, 0, rtas_error_log_max);
+
+        rc = nvram_read_error_log(logdata, rtas_error_log_max, &err_type);
+
+        /* We can use rtas_log_buf now */
+        no_logging = 0;
+
+        if (!rc) {
+                if (err_type != ERR_FLAG_ALREADY_LOGGED) {
+                        pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
+                }
+        }
+
+        /* First pass. */
+        do_event_scan_all_cpus(1000);
+
+        if (surveillance_timeout != -1) {
+                DEBUG("enabling surveillance\n");
+                enable_surveillance(surveillance_timeout);
+                DEBUG("surveillance enabled\n");
+        }
+
+        /* Delay should be at least one second since some
+         * machines have problems if we call event-scan too
+         * quickly. */
+        for (;;)
+                do_event_scan_all_cpus(30000/rtas_event_scan_rate);
+
+error:
+        /* Should delete proc entries */
+        return -EINVAL;
+}
+
+static int __init rtas_init(void)
+{
+        struct proc_dir_entry *entry;
+
+        /* No RTAS, only warn if we are on a pSeries box  */
+        if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) {
+                if (systemcfg->platform & PLATFORM_PSERIES)
+                        printk(KERN_INFO "rtasd: no event-scan on system\n");
+                return 1;
+        }
+
+        entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL);
+        if (entry)
+                entry->proc_fops = &proc_rtas_log_operations;
+        else
+                printk(KERN_ERR "Failed to create error_log proc entry\n");
+
+        if (kernel_thread(rtasd, NULL, CLONE_FS) < 0)
+                printk(KERN_ERR "Failed to start RTAS daemon\n");
+
+        return 0;
+}
+
+static int __init surveillance_setup(char *str)
+{
+        int i;
+
+        if (get_option(&str,&i)) {
+                if (i >= 0 && i <= 255)
+                        surveillance_timeout = i;
+        }
+
+        return 1;
+}
+
+static int __init rtasmsgs_setup(char *str)
+{
+        if (strcmp(str, "on") == 0)
+                full_rtas_msgs = 1;
+        else if (strcmp(str, "off") == 0)
+                full_rtas_msgs = 0;
+
+        return 1;
+}
+__initcall(rtas_init);
+__setup("surveillance=", surveillance_setup);
+__setup("rtasmsgs=", rtasmsgs_setup);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c0a3d918148a..f73d69143d35 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -589,9 +589,9 @@ struct machdep_calls __initdata pSeries_md = {
         .pcibios_fixup          = pSeries_final_fixup,
         .pci_probe_mode         = pSeries_pci_probe_mode,
         .irq_bus_setup          = pSeries_irq_bus_setup,
-        .restart                = rtas_fw_restart,
-        .power_off              = rtas_fw_power_off,
-        .halt                   = rtas_fw_halt,
+        .restart                = rtas_restart,
+        .power_off              = rtas_power_off,
+        .halt                   = rtas_halt,
         .panic                  = rtas_os_term,
         .cpu_die                = pSeries_mach_cpu_die,
         .get_boot_time          = rtas_get_boot_time,