powerpc/85xx: Add support for P5040DS board

Add support for the Freescale P5040DS Reference Board ("Superhydra"), which
is similar to the P5020DS.  Features of the P5040 are listed below, but
not all of these features (e.g. DPAA networking) are currently supported.

Four P5040 single-threaded e5500 cores built
    Up to 2.4 GHz with 64-bit ISA support
    Three levels of instruction: user, supervisor, hypervisor
CoreNet platform cache (CPC)
    2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
 support Up to 1600MT/s
    Memory pre-fetch engine
DPAA incorporating acceleration for the following functions
    Packet parsing, classification, and distribution (FMAN)
    Queue management for scheduling, packet sequencing and
	congestion management (QMAN)
    Hardware buffer management for buffer allocation and
	de-allocation (BMAN)
    Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes
    20 lanes at up to 5 Gbps
    Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
    Two 10 Gbps Ethernet MACs
    Ten 1 Gbps Ethernet MACs
High-speed peripheral interfaces
    Two PCI Express 2.0/3.0 controllers
Additional peripheral interfaces
    Two serial ATA (SATA 2.0) controllers
    Two high-speed USB 2.0 controllers with integrated PHY
    Enhanced secure digital host controller (SD/MMC/eMMC)
    Enhanced serial peripheral interface (eSPI)
    Two I2C controllers
    Four UARTs
    Integrated flash controller supporting NAND and NOR flash
DMA
    Dual four channel
Support for hardware virtualization and partitioning enforcement
    Extra privileged level for hypervisor support
QorIQ Trust Architecture 1.1
    Secure boot, secure debug, tamper detection, volatile key storage

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

4 files changed, 113 insertions, 1 deletions

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 159c01e91463..31f0618ec677 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -254,6 +254,20 @@ config P5020_DS
         help
           This option enables support for the P5020 DS board
 
+config P5040_DS
+        bool "Freescale P5040 DS"
+        select DEFAULT_UIMAGE
+        select E500
+        select PPC_E500MC
+        select PHYS_64BIT
+        select SWIOTLB
+        select ARCH_REQUIRE_GPIOLIB
+        select GPIO_MPC8XXX
+        select HAS_RAPIDIO
+        select PPC_EPAPR_HV_PIC
+        help
+          This option enables support for the P5040 DS board
+
 config PPC_QEMU_E500
         bool "QEMU generic e500 platform"
         depends on EXPERIMENTAL
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 3dfe81175036..d99268aef556 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
 obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
+obj-$(CONFIG_P5040_DS)    += p5040_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)     += stx_gp3.o
 obj-$(CONFIG_TQM85xx)     += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 925b02874233..473d57381119 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -63,7 +63,9 @@ void __init corenet_ds_setup_arch(void)
 #ifdef CONFIG_PCI
         for_each_node_by_type(np, "pci") {
                 if (of_device_is_compatible(np, "fsl,p4080-pcie") ||
-                    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2")) {
+                    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2") ||
+                    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.3") ||
+                    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.4")) {
                         fsl_add_bridge(np, 0);
                         hose = pci_find_hose_for_OF_device(np);
                         max = min(max, hose->dma_window_base_cur +
@@ -99,6 +101,12 @@ static const struct of_device_id of_device_ids[] __devinitconst = {
         {
                 .compatible     = "fsl,qoriq-pcie-v2.2",
         },
+        {
+                .compatible     = "fsl,qoriq-pcie-v2.3",
+        },
+        {
+                .compatible     = "fsl,qoriq-pcie-v2.4",
+        },
         /* The following two are for the Freescale hypervisor */
         {
                 .name           = "hypervisor",
diff --git a/arch/powerpc/platforms/85xx/p5040_ds.c b/arch/powerpc/platforms/85xx/p5040_ds.c
new file mode 100644
index 000000000000..8e22a3436e04
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p5040_ds.c
@@ -0,0 +1,89 @@
+/*
+ * P5040 DS Setup
+ *
+ * Copyright 2009-2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_fdt.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p5040_ds_probe(void)
+{
+        unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+        extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+        if (of_flat_dt_is_compatible(root, "fsl,P5040DS"))
+                return 1;
+
+        /* Check if we're running under the Freescale hypervisor */
+        if (of_flat_dt_is_compatible(root, "fsl,P5040DS-hv")) {
+                ppc_md.init_IRQ = ehv_pic_init;
+                ppc_md.get_irq = ehv_pic_get_irq;
+                ppc_md.restart = fsl_hv_restart;
+                ppc_md.power_off = fsl_hv_halt;
+                ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+                /*
+                 * Disable the timebase sync operations because we can't write
+                 * to the timebase registers under the hypervisor.
+                  */
+                smp_85xx_ops.give_timebase = NULL;
+                smp_85xx_ops.take_timebase = NULL;
+#endif
+                return 1;
+        }
+
+        return 0;
+}
+
+define_machine(p5040_ds) {
+        .name                   = "P5040 DS",
+        .probe                  = p5040_ds_probe,
+        .setup_arch             = corenet_ds_setup_arch,
+        .init_IRQ               = corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+        .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
+#endif
+/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
+#ifdef CONFIG_PPC64
+        .get_irq                = mpic_get_irq,
+#else
+        .get_irq                = mpic_get_coreint_irq,
+#endif
+        .restart                = fsl_rstcr_restart,
+        .calibrate_decr         = generic_calibrate_decr,
+        .progress               = udbg_progress,
+#ifdef CONFIG_PPC64
+        .power_save             = book3e_idle,
+#else
+        .power_save             = e500_idle,
+#endif
+};
+
+machine_device_initcall(p5040_ds, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(p5040_ds, swiotlb_setup_bus_notifier);
+#endif