[POWERPC] pasemi: Move electra-ide to pata_of_platform

Move electra-ide glue over to the new pata_of_platform framework, and
add the quirks needed to that driver.

Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 0 insertions, 106 deletions

diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index b3458a181a15..348e0619e3e5 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -37,13 +37,4 @@ config PPC_PASEMI_MDIO
         help
           Driver for MDIO via GPIO on PWRficient platforms
 
-config ELECTRA_IDE
-      tristate "Electra IDE driver"
-      default y
-      depends on PPC_PASEMI && ATA
-      select PATA_PLATFORM
-      help
-        This includes driver support for the Electra on-board IDE
-        interface.
-
 endmenu
diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile
index f47fcac7e581..2cd2a4f26a48 100644
--- a/arch/powerpc/platforms/pasemi/Makefile
+++ b/arch/powerpc/platforms/pasemi/Makefile
@@ -1,4 +1,3 @@
 obj-y   += setup.o pci.o time.o idle.o powersave.o iommu.o
 obj-$(CONFIG_PPC_PASEMI_MDIO)   += gpio_mdio.o
-obj-$(CONFIG_ELECTRA_IDE) += electra_ide.o
 obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
diff --git a/arch/powerpc/platforms/pasemi/electra_ide.c b/arch/powerpc/platforms/pasemi/electra_ide.c
deleted file mode 100644
index 12fb0c949263..000000000000
--- a/arch/powerpc/platforms/pasemi/electra_ide.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2007 PA Semi, Inc
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/prom.h>
-#include <asm/system.h>
-
-/* The electra IDE interface is incredibly simple: Just a device on the localbus
- * with interrupts hooked up to one of the GPIOs. The device tree contains the
- * address window and interrupt mappings already, and the pata_platform driver handles
- * the rest. We just need to hook the two up.
- */
-
-#define MAX_IFS 4       /* really, we have only one */
-
-static struct platform_device *pdevs[MAX_IFS];
-
-static int __devinit electra_ide_init(void)
-{
-        struct device_node *np;
-        struct resource r[3];
-        int ret = 0;
-        int i;
-
-        np = of_find_compatible_node(NULL, "ide", "electra-ide");
-        i = 0;
-
-        while (np && i < MAX_IFS) {
-                memset(r, 0, sizeof(r));
-
-                /* pata_platform wants two address ranges: one for the base registers,
-                 * another for the control (altstatus). It's located at offset 0x3f6 in
-                 * the window, but the device tree only has one large register window
-                 * that covers both ranges. So we need to split it up by hand here:
-                 */
-
-                ret = of_address_to_resource(np, 0, &r[0]);
-                if (ret)
-                        goto out;
-                ret = of_address_to_resource(np, 0, &r[1]);
-                if (ret)
-                        goto out;
-
-                r[1].start += 0x3f6;
-                r[0].end = r[1].start-1;
-
-                r[2].start = irq_of_parse_and_map(np, 0);
-                r[2].end = irq_of_parse_and_map(np, 0);
-                r[2].flags = IORESOURCE_IRQ;
-
-                pr_debug("registering platform device at 0x%lx/0x%lx, irq is %ld\n",
-                         r[0].start, r[1].start, r[2].start);
-                pdevs[i] = platform_device_register_simple("pata_platform", i, r, 3);
-                if (IS_ERR(pdevs[i])) {
-                        ret = PTR_ERR(pdevs[i]);
-                        pdevs[i] = NULL;
-                        goto out;
-                }
-                np = of_find_compatible_node(np, "ide", "electra-ide");
-        }
-out:
-        return ret;
-}
-module_init(electra_ide_init);
-
-static void __devexit electra_ide_exit(void)
-{
-        int i;
-
-        for (i = 0; i < MAX_IFS; i++)
-                if (pdevs[i])
-                        platform_device_unregister(pdevs[i]);
-}
-module_exit(electra_ide_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
-MODULE_DESCRIPTION("PA Semi Electra IDE driver");