[POWERPC] Removed config options that we don't support in embedded6xx

When we started arch/powerpc we duplicated a number of config options from
arch/ppc for various platforms that are supported.  Now that we actually
support a few platforms, remove all the ones that haven't been moved over.
Additionally, this cleanup moved the 82xx/PQ2 options over into
arch/powerpc/platforms/82xx/Kconfig where they belong.  It also killed
GEN550 which doesn't exist in arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 2 insertions, 262 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 3410bcbc9dbe..9557908ef545 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -2,78 +2,6 @@ choice
         prompt "Machine Type"
         depends on EMBEDDED6xx
 
-config KATANA
-        bool "Artesyn-Katana"
-        help
-          Select KATANA if configuring an Artesyn KATANA 750i or 3750
-          cPCI board.
-
-config WILLOW
-        bool "Cogent-Willow"
-
-config CPCI690
-        bool "Force-CPCI690"
-        help
-          Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
-        bool "Force-PowerPMC250"
-
-config CHESTNUT
-        bool "IBM 750FX Eval board or 750GX Eval board"
-        help
-          Select CHESTNUT if configuring an IBM 750FX Eval Board or a
-          IBM 750GX Eval board.
-
-config SPRUCE
-        bool "IBM-Spruce"
-        select PPC_INDIRECT_PCI
-
-config HDPU
-        bool "Sky-HDPU"
-        help
-          Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
-        depends on HDPU
-        tristate "HDPU-Features"
-        help
-          Select to enable HDPU enhanced features.
-
-config EV64260
-        bool "Marvell-EV64260BP"
-        help
-          Select EV64260 if configuring a Marvell (formerly Galileo)
-          EV64260BP Evaluation platform.
-
-config LOPEC
-        bool "Motorola-LoPEC"
-        select PPC_I8259
-
-config MVME5100
-        bool "Motorola-MVME5100"
-        select PPC_INDIRECT_PCI
-
-config PPLUS
-        bool "Motorola-PowerPlus"
-        select PPC_I8259
-        select PPC_INDIRECT_PCI
-
-config PRPMC750
-        bool "Motorola-PrPMC750"
-        select PPC_INDIRECT_PCI
-
-config PRPMC800
-        bool "Motorola-PrPMC800"
-        select PPC_INDIRECT_PCI
-
-config SANDPOINT
-        bool "Motorola-Sandpoint"
-        select PPC_I8259
-        help
-          Select SANDPOINT if configuring for a Motorola Sandpoint X3
-          (any flavor).
-
 config LINKSTATION
         bool "Linkstation / Kurobox(HG) from Buffalo"
         select MPIC
@@ -97,212 +25,24 @@ config MPC7448HPC2
         help
           Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
           platform
-
-config RADSTONE_PPC7D
-        bool "Radstone Technology PPC7D board"
-        select PPC_I8259
-
-config PAL4
-        bool "SBS-Palomar4"
-
-config EST8260
-        bool "EST8260"
-        ---help---
-          The EST8260 is a single-board computer manufactured by Wind River
-          Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
-          the MPC8260.  Wind River Systems has a website at
-          <http://www.windriver.com/>, but the EST8260 cannot be found on it
-          and has probably been discontinued or rebadged.
-
-config SBC82xx
-        bool "SBC82xx"
-        ---help---
-          SBC PowerQUICC II, single-board computer with MPC82xx CPU
-          Manufacturer: Wind River Systems, Inc.
-          Date of Release: May 2003
-          End of Life: -
-          URL: <http://www.windriver.com/>
-
-config SBS8260
-        bool "SBS8260"
-
-config RPX8260
-        bool "RPXSUPER"
-
-config TQM8260
-        bool "TQM8260"
-        ---help---
-          MPC8260 based module, little larger than credit card,
-          up to 128 MB global + 64 MB local RAM, 32 MB Flash,
-          32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
-          2 x serial ports, ...
-          Manufacturer: TQ Components, www.tq-group.de
-          Date of Release: June 2001
-          End of Life: not yet :-)
-          URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config ADS8272
-        bool "ADS8272"
-
-config PQ2FADS
-        bool "Freescale-PQ2FADS"
-        help
-          Select PQ2FADS if you wish to configure for a Freescale
-          PQ2FADS board (-VR or -ZU).
-
-config EV64360
-        bool "Marvell-EV64360BP"
-        help
-          Select EV64360 if configuring a Marvell EV64360BP Evaluation
-          platform.
 endchoice
 
-config PQ2ADS
-        bool
-        depends on ADS8272
-        default y
-
-config TQM8xxL
-        bool
-        depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
-        default y
-
-config 8260
-        bool "CPM2 Support" if WILLOW
-        depends on 6xx
-        default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
-        help
-          The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
-          this option means that you wish to build a kernel for a machine with
-          an 8260 class CPU.
-
-config 8272
-        bool
-        depends on 6xx
-        default y if ADS8272
-        select 8260
-        help
-          The MPC8272 CPM has a different internal dpram setup than other CPM2
-          devices
-
-config CPM2
-        bool
-        depends on 8260 || MPC8560 || MPC8555
-        default y
-        help
-          The CPM2 (Communications Processor Module) is a coprocessor on
-          embedded CPUs made by Motorola.  Selecting this option means that
-          you wish to build a kernel for a machine with a CPM2 coprocessor
-          on it (826x, 827x, 8560).
-
-config PPC_GEN550
-        bool
-        depends on SANDPOINT || SPRUCE || PPLUS || \
-                PRPMC750 || PRPMC800 || LOPEC || \
-                (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
-                83xx || LINKSTATION
-        default y
-
-config FORCE
-        bool
-        depends on 6xx && POWERPMC250
-        default y
-
-config GT64260
-        bool
-        depends on EV64260 || CPCI690
-        default y
-
-config MV64360          # Really MV64360 & MV64460
-        bool
-        depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
-        default y
-
-config MV64X60
-        bool
-        depends on (GT64260 || MV64360)
-        select PPC_INDIRECT_PCI
-        default y
-
 config TSI108_BRIDGE
         bool
         depends on MPC7448HPC2
         default y
 
-menu "Set bridge options"
-        depends on MV64X60
-
-config NOT_COHERENT_CACHE
-        bool "Turn off Cache Coherency"
-        default n
-        help
-          Some 64x60 bridges lock up when trying to enforce cache coherency.
-          When this option is selected, cache coherency will be turned off.
-          Note that this can cause other problems (e.g., stale data being
-          speculatively loaded via a cached mapping).  Use at your own risk.
-
-config MV64X60_BASE
-        hex "Set bridge base used by firmware"
-        default "0xf1000000"
-        help
-          A firmware can leave the base address of the bridge's registers at
-          a non-standard location.  If so, set this value to reflect the
-          address of that non-standard location.
-
-config MV64X60_NEW_BASE
-        hex "Set bridge base used by kernel"
-        default "0xf1000000"
-        help
-          If the current base address of the bridge's registers is not where
-          you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
-        bool "Enable Non-Monarch Support"
-        depends on PRPMC800
-
-config HARRIER
-        bool
-        depends on PRPMC800
-        default y
-
-config EPIC_SERIAL_MODE
-        bool
-        depends on 6xx && (LOPEC || SANDPOINT)
-        default y
-
 config MPC10X_BRIDGE
         bool
-        depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+        depends on LINKSTATION
         select PPC_INDIRECT_PCI
         default y
 
 config MPC10X_OPENPIC
         bool
-        depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+        depends on LINKSTATION
         default y
 
 config MPC10X_STORE_GATHERING
         bool "Enable MPC10x store gathering"
         depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
-        bool "Enable DUART mode on Sandpoint"
-        depends on SANDPOINT
-        help
-          If this option is enabled then the MPC824x processor will run
-          in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
-        bool "Enable Harrier store gathering"
-        depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
-        bool "MVME5100 configured with an IPMC761"
-        depends on MVME5100
-        select PPC_I8259
-
-config SPRUCE_BAUD_33M
-        bool "Spruce baud clock support"
-        depends on SPRUCE