[POWERPC] Add initial iomega StorCenter board port.

Use cuImage bootwrapper until U-Boot port is completed.
Derived heavily from Linkstation port.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Wilcox <andy@protium.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 17 insertions, 6 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 8924095a7928..6c8083757938 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -9,6 +9,8 @@ config LINKSTATION
         select FSL_SOC
         select PPC_UDBG_16550 if SERIAL_8250
         select DEFAULT_UIMAGE
+        select MPC10X_OPENPIC
+        select MPC10X_BRIDGE
         help
           Select LINKSTATION if configuring for one of PPC- (MPC8241)
           based NAS systems from Buffalo Technology. So far only
@@ -16,6 +18,19 @@ config LINKSTATION
           Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
           Terastation systems should be supported too.
 
+config STORCENTER
+        bool "IOMEGA StorCenter"
+        depends on EMBEDDED6xx
+        select MPIC
+        select FSL_SOC
+        select PPC_UDBG_16550 if SERIAL_8250
+        select WANT_DEVICE_TREE
+        select MPC10X_OPENPIC
+        select MPC10X_BRIDGE
+        help
+          Select STORCENTER if configuring for the iomega StorCenter
+          with an 8241 CPU in it.
+
 config MPC7448HPC2
         bool "Freescale MPC7448HPC2(Taiga)"
         depends on EMBEDDED6xx
@@ -23,6 +38,7 @@ config MPC7448HPC2
         select DEFAULT_UIMAGE
         select PPC_UDBG_16550
         select WANT_DEVICE_TREE
+        select TSI108_BRIDGE
         help
           Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
           platform
@@ -33,6 +49,7 @@ config PPC_HOLLY
         select TSI108_BRIDGE
         select PPC_UDBG_16550
         select WANT_DEVICE_TREE
+        select TSI108_BRIDGE
         help
           Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
           Board with TSI108/9 bridge (Hickory/Holly)
@@ -48,17 +65,13 @@ config PPC_PRPMC2800
 
 config TSI108_BRIDGE
         bool
-        depends on MPC7448HPC2 || PPC_HOLLY
         select PCI
         select MPIC
         select MPIC_WEIRD
-        default y
 
 config MPC10X_BRIDGE
         bool
-        depends on LINKSTATION
         select PPC_INDIRECT_PCI
-        default y
 
 config MV64X60
         bool
@@ -67,8 +80,6 @@ config MV64X60
 
 config MPC10X_OPENPIC
         bool
-        depends on LINKSTATION
-        default y
 
 config MPC10X_STORE_GATHERING
         bool "Enable MPC10x store gathering"