powerpc/44x: Use correct phy-address dt nodes on taishan.dts

Taishan (440GX) has the first PHY (EMAC2) mapped at PHY address 1
and the 2nd PHY (EMAC3) at PHY address 3. Use "phy-address" to
correctly describe this instead of "phy-map".

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 2 insertions, 2 deletions

diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index 058438f9629b..1657ad0bf8a6 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -337,7 +337,7 @@
                                 rx-fifo-size = <4096>;
                                 tx-fifo-size = <2048>;
                                 phy-mode = "rgmii";
-                                phy-map = <0x00000001>;
+                                phy-address = <1>;
                                 rgmii-device = <&RGMII0>;
                                 rgmii-channel = <0>;
                                 zmii-device = <&ZMII0>;
@@ -361,7 +361,7 @@
                                 rx-fifo-size = <4096>;
                                 tx-fifo-size = <2048>;
                                 phy-mode = "rgmii";
-                                phy-map = <0x00000003>;
+                                phy-address = <3>;
                                 rgmii-device = <&RGMII0>;
                                 rgmii-channel = <1>;
                                 zmii-device = <&ZMII0>;