powerpc/86xx: add MMC SPI support for MPC8610HPCD boards

This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for
PIXIS' sdcsr bank that is used for managing SPI chip-select and for
reading card's states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 32 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index cfc2c60d1f5f..f468d215f716 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -100,8 +100,18 @@
                 };
 
                 board-control@3,0 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
                         compatible = "fsl,fpga-pixis";
                         reg = <3 0 0x20>;
+                        ranges = <0 3 0 0x20>;
+
+                        sdcsr_pio: gpio-controller@a {
+                                #gpio-cells = <2>;
+                                compatible = "fsl,fpga-pixis-gpio-bank";
+                                reg = <0xa 1>;
+                                gpio-controller;
+                        };
                 };
         };
 
@@ -176,6 +186,28 @@
                         interrupt-parent = <&mpic>;
                 };
 
+                spi@7000 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        compatible = "fsl,mpc8610-spi", "fsl,spi";
+                        reg = <0x7000 0x40>;
+                        cell-index = <0>;
+                        interrupts = <59 2>;
+                        interrupt-parent = <&mpic>;
+                        mode = "cpu";
+                        gpios = <&sdcsr_pio 7 0>;
+
+                        mmc-slot@0 {
+                                compatible = "fsl,mpc8610hpcd-mmc-slot",
+                                             "mmc-spi-slot";
+                                reg = <0>;
+                                gpios = <&sdcsr_pio 0 1   /* nCD */
+                                         &sdcsr_pio 1 0>; /*  WP */
+                                voltage-ranges = <3300 3300>;
+                                spi-max-frequency = <50000000>;
+                        };
+                };
+
                 display@2c000 {
                         compatible = "fsl,diu";
                         reg = <0x2c000 100>;