Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6

* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings

10 files changed, 15 insertions, 15 deletions

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 6f432e6df9af..b23c40eb7a52 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -18,7 +18,7 @@ export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
 # rather than bools y/n
 
 # Work out HW multipler support. This is tricky.
-# 1. Spartan2 has no HW multiplers.
+# 1. Spartan2 has no HW multipliers.
 # 2. MicroBlaze v3.x always uses them, except in Spartan 2
 # 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
 ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index eae32220f447..8cdac14b55b0 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -70,7 +70,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
 
 /*
  * read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus littel endian.
+ * writel, writeq) accessors are for PCI and thus little endian.
  * Linux 2.4 for Microblaze had this wrong.
  */
 static inline unsigned char readb(const volatile void __iomem *addr)
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 10717669e0c2..746df91e5796 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -76,7 +76,7 @@ struct pci_controller {
          * Used for variants of PCI indirect handling and possible quirks:
          *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
          *  EXT_REG - provides access to PCI-e extended registers
-         *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+         *  SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
          *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
          *   to determine which bus number to match on when generating type0
          *   config cycles
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index 2232ff942ba9..ba65cf472544 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -158,7 +158,7 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
 extern void pcibios_setup_bus_devices(struct pci_bus *bus);
 extern void pcibios_setup_bus_self(struct pci_bus *bus);
 
-/* This part of code was originaly in xilinx-pci.h */
+/* This part of code was originally in xilinx-pci.h */
 #ifdef CONFIG_PCI_XILINX
 extern void __init xilinx_pci_init(void);
 #else
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index cf0afd90a2c0..4b7d8a3f4aef 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -129,7 +129,7 @@ do {									\
  * to use for simple wdc or wic.
  *
  * start address is cache aligned
- * end address is not aligned, if end is aligned then I have to substract
+ * end address is not aligned, if end is aligned then I have to subtract
  * cacheline length because I can't flush/invalidate the next cacheline.
  * If is not, I align it because I will flush/invalidate whole line.
  */
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index cc495d7d99cc..52746e718dfa 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -63,8 +63,8 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
         if (likely(c >= 4)) {
                 unsigned  value, buf_hold;
 
-                /* Align the dstination to a word boundry. */
-                /* This is done in an endian independant manner. */
+                /* Align the destination to a word boundary. */
+                /* This is done in an endian independent manner. */
                 switch ((unsigned long)dst & 3) {
                 case 1:
                         *dst++ = *src++;
@@ -80,7 +80,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
                 i_dst = (void *)dst;
 
                 /* Choose a copy scheme based on the source */
-                /* alignment relative to dstination. */
+                /* alignment relative to destination. */
                 switch ((unsigned long)src & 3) {
                 case 0x0:       /* Both byte offsets are aligned */
                         i_src  = (const void *)src;
@@ -173,7 +173,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
         }
 
         /* Finish off any remaining bytes */
-        /* simple fast copy, ... unless a cache boundry is crossed */
+        /* simple fast copy, ... unless a cache boundary is crossed */
         switch (c) {
         case 3:
                 *dst++ = *src++;
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index 810fd68775e3..2146c3752a80 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -83,8 +83,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
         if (c >= 4) {
                 unsigned  value, buf_hold;
 
-                /* Align the destination to a word boundry. */
-                /* This is done in an endian independant manner. */
+                /* Align the destination to a word boundary. */
+                /* This is done in an endian independent manner. */
 
                 switch ((unsigned long)dst & 3) {
                 case 3:
@@ -193,7 +193,7 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
                 dst = (void *)i_dst;
         }
 
-        /* simple fast copy, ... unless a cache boundry is crossed */
+        /* simple fast copy, ... unless a cache boundary is crossed */
         /* Finish off any remaining bytes */
         switch (c) {
         case 4:
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 834565d1607e..ddf67939576d 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -64,7 +64,7 @@ void *memset(void *v_src, int c, __kernel_size_t n)
 
         if (likely(n >= 4)) {
                 /* Align the destination to a word boundary */
-                /* This is done in an endian independant manner */
+                /* This is done in an endian independent manner */
                 switch ((unsigned) src & 3) {
                 case 1:
                         *src++ = c;
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
index 25f18f017f21..4196eb6bd764 100644
--- a/arch/microblaze/pci/indirect_pci.c
+++ b/arch/microblaze/pci/indirect_pci.c
@@ -108,7 +108,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
                 out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
                          (devfn << 8) | reg | cfg_type));
 
-        /* surpress setting of PCI_PRIMARY_BUS */
+        /* suppress setting of PCI_PRIMARY_BUS */
         if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
                 if ((offset == PCI_PRIMARY_BUS) &&
                         (bus->number == hose->first_busno))
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
index 5d86fc19029d..25a6f019e94d 100644
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -29,7 +29,7 @@ config KERNEL_BASE_ADDR
           BASE Address for kernel
 
 config XILINX_MICROBLAZE0_FAMILY
-        string "Targetted FPGA family"
+        string "Targeted FPGA family"
         default "virtex5"
 
 config XILINX_MICROBLAZE0_USE_MSR_INSTR