microblaze: Change NO_IRQ to 0

As has been discussed many times[1], Using NO_IRQ set to anything other
than 0 is bug waiting to happen since many drivers follow the pattern
"if (!irq)" for testing whether or not an irq has been set.

This patch changes the Microblaze NO_IRQ setting from -1 to 0 to bring
it in line with most of the rest of the kernel.  It also prepares for
Microblaze eventually supporting multiple interrupt controllers by
breaking the assumption that hwirq# == Linux IRQ#.  The Linux IRQ
number is just a cookie with no guarantee of a direct relationship
with the hardware irq arrangement.

At this point, Microblaze interrupt handling only supports only one
instance of one kind of interrupt controller (xilinx_intc).  This change
shouldn't affect any architecture code outside of the interrupt
controller driver and the irq_of mapping.

Updated to 3.2 and to use irq_data.hwirq by Rob Herring.
Tested and fixed by Michal Simek.

[1] http://lkml.org/lkml/2005/11/21/221

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

2 files changed, 21 insertions, 18 deletions

diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 1293098ff70d..44b177e2ab12 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -42,8 +42,9 @@ unsigned int nr_irq;
 
 static void intc_enable_or_unmask(struct irq_data *d)
 {
-        unsigned long mask = 1 << d->irq;
-        pr_debug("enable_or_unmask: %d\n", d->irq);
+        unsigned long mask = 1 << d->hwirq;
+
+        pr_debug("enable_or_unmask: %ld\n", d->hwirq);
         out_be32(INTC_BASE + SIE, mask);
 
         /* ack level irqs because they can't be acked during
@@ -56,20 +57,21 @@ static void intc_enable_or_unmask(struct irq_data *d)
 
 static void intc_disable_or_mask(struct irq_data *d)
 {
-        pr_debug("disable: %d\n", d->irq);
-        out_be32(INTC_BASE + CIE, 1 << d->irq);
+        pr_debug("disable: %ld\n", d->hwirq);
+        out_be32(INTC_BASE + CIE, 1 << d->hwirq);
 }
 
 static void intc_ack(struct irq_data *d)
 {
-        pr_debug("ack: %d\n", d->irq);
-        out_be32(INTC_BASE + IAR, 1 << d->irq);
+        pr_debug("ack: %ld\n", d->hwirq);
+        out_be32(INTC_BASE + IAR, 1 << d->hwirq);
 }
 
 static void intc_mask_ack(struct irq_data *d)
 {
-        unsigned long mask = 1 << d->irq;
-        pr_debug("disable_and_ack: %d\n", d->irq);
+        unsigned long mask = 1 << d->hwirq;
+
+        pr_debug("disable_and_ack: %ld\n", d->hwirq);
         out_be32(INTC_BASE + CIE, mask);
         out_be32(INTC_BASE + IAR, mask);
 }
@@ -91,7 +93,7 @@ unsigned int get_irq(struct pt_regs *regs)
          * order to handle multiple interrupt controllers. It currently
          * is hardcoded to check for interrupts only on the first INTC.
          */
-        irq = in_be32(INTC_BASE + IVR);
+        irq = in_be32(INTC_BASE + IVR) + NO_IRQ_OFFSET;
         pr_debug("get_irq: %d\n", irq);
 
         return irq;
@@ -116,8 +118,7 @@ void __init init_IRQ(void)
         intc = of_find_compatible_node(NULL, NULL, "xlnx,xps-intc-1.00.a");
         BUG_ON(!intc);
 
-        intc_baseaddr = be32_to_cpup(of_get_property(intc,
-                                                                "reg", NULL));
+        intc_baseaddr = be32_to_cpup(of_get_property(intc, "reg", NULL));
         intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
         nr_irq = be32_to_cpup(of_get_property(intc,
                                                 "xlnx,num-intr-inputs", NULL));
@@ -145,8 +146,8 @@ void __init init_IRQ(void)
         /* Turn on the Master Enable. */
         out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
 
-        for (i = 0; i < nr_irq; ++i) {
-                if (intr_mask & (0x00000001 << i)) {
+        for (i = IRQ_OFFSET; i < (nr_irq + IRQ_OFFSET); ++i) {
+                if (intr_mask & (0x00000001 << (i - IRQ_OFFSET))) {
                         irq_set_chip_and_handler_name(i, &intc_dev,
                                 handle_edge_irq, "edge");
                         irq_clear_status_flags(i, IRQ_LEVEL);
@@ -155,5 +156,6 @@ void __init init_IRQ(void)
                                 handle_level_irq, "level");
                         irq_set_status_flags(i, IRQ_LEVEL);
                 }
+                irq_get_irq_data(i)->hwirq = i - IRQ_OFFSET;
         }
 }
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index e5d63a89b9b2..bbebcae72c02 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -33,11 +33,12 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
         irq_enter();
         irq = get_irq(regs);
 next_irq:
-        BUG_ON(irq == -1U);
-        generic_handle_irq(irq);
+        BUG_ON(!irq);
+        /* Substract 1 because of get_irq */
+        generic_handle_irq(irq + IRQ_OFFSET - NO_IRQ_OFFSET);
 
         irq = get_irq(regs);
-        if (irq != -1U) {
+        if (irq) {
                 pr_debug("next irq: %d\n", irq);
                 ++concurrent_irq;
                 goto next_irq;
@@ -52,13 +53,13 @@ next_irq:
   intc without any cascades or any connection that's why mapping is 1:1 */
 unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
 {
-        return hwirq;
+        return hwirq + IRQ_OFFSET;
 }
 EXPORT_SYMBOL_GPL(irq_create_mapping);
 
 unsigned int irq_create_of_mapping(struct device_node *controller,
                                    const u32 *intspec, unsigned int intsize)
 {
-        return intspec[0];
+        return intspec[0] + IRQ_OFFSET;
 }
 EXPORT_SYMBOL_GPL(irq_create_of_mapping);