m68k/mac: early console

Revive the old mac_serial_print() routine as mac_early_print(). mac_serial_print() did not function because it did not use the right offsets for its stack arguments. Fix this and make compilation conditional on CONFIG_EARLY_PRINTK instead of the obscure MAC_SERIAL_DEBUG macro.

Give mac_early_print() a new string length parameter to fit the early console API.

Send output to the framebuffer as well as serial ports.

Change the line rate to 38400 baud to match the default for the real (pmac_zilog) serial console.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

1 files changed, 59 insertions, 58 deletions

diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 27622b3273c1..d197e7ff62c5 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -250,9 +250,8 @@
  * USE_MFP:     Use the ST-MFP port (Modem1) for serial debug.
  *
  * Macintosh constants:
- * MAC_SERIAL_DEBUG:    Turns on serial debug output for the Macintosh.
- * MAC_USE_SCC_A:       Use the SCC port A (modem) for serial debug.
- * MAC_USE_SCC_B:       Use the SCC port B (printer) for serial debug (default).
+ * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
+ * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
  */
 
 #include <linux/linkage.h>
@@ -268,33 +267,25 @@
 
 #include <asm/machw.h>
 
-/*
- * Macintosh console support
- */
-
 #ifdef CONFIG_FRAMEBUFFER_CONSOLE
 #define CONSOLE
 #define CONSOLE_PENGUIN
 #endif
 
-/*
- * Macintosh serial debug support; outputs boot info to the printer
- *   and/or modem serial ports
- */
-#undef MAC_SERIAL_DEBUG
+#ifdef CONFIG_EARLY_PRINTK
+#define SERIAL_DEBUG
+#else
+#undef SERIAL_DEBUG
+#endif
 
-/*
- * Macintosh serial debug port selection; define one or both;
- *   requires MAC_SERIAL_DEBUG to be defined
- */
-#define MAC_USE_SCC_A           /* Macintosh modem serial port */
-#define MAC_USE_SCC_B           /* Macintosh printer serial port */
+#else /* !CONFIG_MAC */
 
-#endif  /* CONFIG_MAC */
+#define SERIAL_DEBUG
+
+#endif /* !CONFIG_MAC */
 
 #undef MMU_PRINT
 #undef MMU_NOCACHE_KERNEL
-#define SERIAL_DEBUG
 #undef DEBUG
 
 /*
@@ -655,11 +646,11 @@ ENTRY(__start)
         lea     %pc@(L(mac_rowbytes)),%a1
         movel   %a0@,%a1@
 
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
         get_bi_record   BI_MAC_SCCBASE
         lea     %pc@(L(mac_sccbase)),%a1
         movel   %a0@,%a1@
-#endif /* MAC_SERIAL_DEBUG */
+#endif
 
 #if 0
         /*
@@ -1427,7 +1418,7 @@ L(mmu_fixup_done):
         subl    %d0,L(console_font)
         subl    %d0,L(console_font_data)
 #endif
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
         orl     #0x50000000,L(mac_sccbase)
 #endif
 1:
@@ -1917,7 +1908,7 @@ mmu_030_print:
         jbne    30b
 
 mmu_print_done:
-        puts    "\n\n"
+        puts    "\n"
 
 func_return     mmu_print
 
@@ -2768,7 +2759,7 @@ L(scc_initable_mac):
         .byte   9,0             /* no interrupts */
         .byte   10,0            /* NRZ */
         .byte   11,0x50         /* use baud rate generator */
-        .byte   12,10,13,0      /* 9600 baud */
+        .byte   12,1,13,0       /* 38400 baud */
         .byte   14,1            /* Baud rate generator enable */
         .byte   3,0xc1          /* enable receiver */
         .byte   5,0xea          /* enable transmitter */
@@ -2906,10 +2897,12 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 #endif
 #ifdef CONFIG_MAC
         is_not_mac(L(serial_init_not_mac))
-#ifdef MAC_SERIAL_DEBUG
-#if !defined(MAC_USE_SCC_A) && !defined(MAC_USE_SCC_B)
-#define MAC_USE_SCC_B
-#endif
+
+#ifdef SERIAL_DEBUG
+/* You may define either or both of these. */
+#define MAC_USE_SCC_A /* Modem port */
+#define MAC_USE_SCC_B /* Printer port */
+
 #define mac_scc_cha_b_ctrl_offset       0x0
 #define mac_scc_cha_a_ctrl_offset       0x2
 #define mac_scc_cha_b_data_offset       0x4
@@ -2940,7 +2933,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
         jra     7b
 8:
 #endif  /* MAC_USE_SCC_B */
-#endif  /* MAC_SERIAL_DEBUG */
+#endif  /* SERIAL_DEBUG */
 
         jra     L(serial_init_done)
 L(serial_init_not_mac):
@@ -3011,7 +3004,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 #ifdef CONFIG_MAC
         is_not_mac(5f)
 
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 
 #ifdef MAC_USE_SCC_A
         movel   %pc@(L(mac_sccbase)),%a1
@@ -3029,7 +3022,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
         moveb   %d0,%a1@(mac_scc_cha_b_data_offset)
 #endif  /* MAC_USE_SCC_B */
 
-#endif  /* MAC_SERIAL_DEBUG */
+#endif  /* SERIAL_DEBUG */
 
         jra     L(serial_putc_done)
 5:
@@ -3248,33 +3241,39 @@ func_return	putn
 
 #ifdef CONFIG_MAC
 /*
- *      mac_serial_print
+ *      mac_early_print
  *
  *      This routine takes its parameters on the stack.  It then
- *      turns around and calls the internal routine.  This routine
- *      is used until the Linux console driver initializes itself.
+ *      turns around and calls the internal routines.  This routine
+ *      is used by the boot console.
  *
  *      The calling parameters are:
- *              void mac_serial_print(const char *str);
+ *              void mac_early_print(const char *str, unsigned length);
  *
  *      This routine does NOT understand variable arguments only
  *      simple strings!
  */
-ENTRY(mac_serial_print)
-        moveml  %d0/%a0,%sp@-
-#if 1
-        move    %sr,%sp@-
+ENTRY(mac_early_print)
+        moveml  %d0/%d1/%a0,%sp@-
+        movew   %sr,%sp@-
         ori     #0x0700,%sr
-#endif
-        movel   %sp@(10),%a0            /* fetch parameter */
+        movel   %sp@(18),%a0            /* fetch parameter */
+        movel   %sp@(22),%d1            /* fetch parameter */
         jra     2f
-1:      serial_putc     %d0
-2:      moveb   %a0@+,%d0
-        jne     1b
-#if 1
-        move    %sp@+,%sr
+1:
+#ifdef CONSOLE
+        console_putc    %d0
 #endif
-        moveml  %sp@+,%d0/%a0
+#ifdef SERIAL_DEBUG
+        serial_putc     %d0
+#endif
+        subq    #1,%d1
+2:      jeq     3f
+        moveb   %a0@+,%d0
+        jne     1b
+3:
+        movew   %sp@+,%sr
+        moveml  %sp@+,%d0/%d1/%a0
         rts
 #endif /* CONFIG_MAC */
 
@@ -3409,10 +3408,10 @@ func_start	console_put_stats,%a0/%d7
          *              a0 = pointer to boot_info
          *              d7 = value of boot_info fields
          */
-        puts    "\nMacLinux\n\n"
+        puts    "\nMacLinux\n"
 
 #ifdef SERIAL_DEBUG
-        puts    " vidaddr:"
+        puts    "\n vidaddr:"
         putn    %pc@(L(mac_videobase))          /* video addr. */
 
         puts    "\n  _stext:"
@@ -3423,19 +3422,21 @@ func_start	console_put_stats,%a0/%d7
         lea     %pc@(_end),%a0
         putn    %a0
 
-        puts    "\ncpuid:"
+        puts    "\n   cpuid:"
         putn    %pc@(L(cputype))
-        putc    '\n'
 
-#ifdef MAC_SERIAL_DEBUG
+#  ifdef CONFIG_MAC
+        puts    "\n sccbase:"
         putn    %pc@(L(mac_sccbase))
+#  endif
+#  ifdef MMU_PRINT
         putc    '\n'
-#endif
-#  if defined(MMU_PRINT)
         jbsr    mmu_print_machine_cpu_types
-#  endif /* MMU_PRINT */
+#  endif
 #endif /* SERIAL_DEBUG */
 
+        putc    '\n'
+
 func_return     console_put_stats
 
 #ifdef CONSOLE_PENGUIN
@@ -3896,11 +3897,11 @@ L(mac_dimensions):
         .long   0
 L(mac_rowbytes):
         .long   0
-#ifdef MAC_SERIAL_DEBUG
+#ifdef SERIAL_DEBUG
 L(mac_sccbase):
         .long   0
-#endif /* MAC_SERIAL_DEBUG */
 #endif
+#endif /* CONFIG_MAC */
 
 #if defined (CONFIG_APOLLO)
 LSRB0        = 0x10412