[CPUFREQ] Lots of whitespace & CodingStyle cleanup.

Signed-off-by: Dave Jones <davej@redhat.com>

13 files changed, 257 insertions, 283 deletions

diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index 26892d2099b0..0f1eb507233b 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -96,7 +96,6 @@ config X86_POWERNOW_K8_ACPI
 
 config X86_GX_SUSPMOD
         tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
-        depends on PCI
         help
          This add the CPUFreq driver for NatSemi Geode processors which
          support suspend modulation.
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 2b62dee35c6c..f275e0d4aee5 100644
--- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -39,7 +39,7 @@ static struct pci_dev *nforce2_chipset_dev;
 static int fid = 0;
 
 /* min_fsb, max_fsb:
- * minimum and maximum FSB (= FSB at boot time) 
+ * minimum and maximum FSB (= FSB at boot time)
  */
 static int min_fsb = 0;
 static int max_fsb = 0;
@@ -57,10 +57,10 @@ MODULE_PARM_DESC(min_fsb,
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
 
-/*
+/**
  * nforce2_calc_fsb - calculate FSB
  * @pll: PLL value
- * 
+ *
  *   Calculates FSB from PLL value
  */
 static int nforce2_calc_fsb(int pll)
@@ -76,10 +76,10 @@ static int nforce2_calc_fsb(int pll)
         return 0;
 }
 
-/*
+/**
  * nforce2_calc_pll - calculate PLL value
  * @fsb: FSB
- * 
+ *
  *   Calculate PLL value for given FSB
  */
 static int nforce2_calc_pll(unsigned int fsb)
@@ -106,10 +106,10 @@ static int nforce2_calc_pll(unsigned int fsb)
         return NFORCE2_PLL(mul, div);
 }
 
-/*
+/**
  * nforce2_write_pll - write PLL value to chipset
  * @pll: PLL value
- * 
+ *
  *   Writes new FSB PLL value to chipset
  */
 static void nforce2_write_pll(int pll)
@@ -121,15 +121,13 @@ static void nforce2_write_pll(int pll)
         pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp);
 
         /* Now write the value in all 64 registers */
-        for (temp = 0; temp <= 0x3f; temp++) {
-                pci_write_config_dword(nforce2_chipset_dev, 
-                                       NFORCE2_PLLREG, pll);
-        }
+        for (temp = 0; temp <= 0x3f; temp++)
+                pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll);
 
         return;
 }
 
-/*
+/**
  * nforce2_fsb_read - Read FSB
  *
  *   Read FSB from chipset
@@ -140,39 +138,32 @@ static unsigned int nforce2_fsb_read(int bootfsb)
         struct pci_dev *nforce2_sub5;
         u32 fsb, temp = 0;
 
-        
         /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
         nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-                                      0x01EF,
-                                      PCI_ANY_ID,
-                                      PCI_ANY_ID,
-                                      NULL);
-        
+                                                0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL);
         if (!nforce2_sub5)
                 return 0;
 
         pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
         fsb /= 1000000;
-        
+
         /* Check if PLL register is already set */
-        pci_read_config_byte(nforce2_chipset_dev, 
-                             NFORCE2_PLLENABLE, (u8 *)&temp);
-        
+        pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+
         if(bootfsb || !temp)
                 return fsb;
                 
         /* Use PLL register FSB value */
-        pci_read_config_dword(nforce2_chipset_dev, 
-                              NFORCE2_PLLREG, &temp);
+        pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp);
         fsb = nforce2_calc_fsb(temp);
 
         return fsb;
 }
 
-/*
+/**
  * nforce2_set_fsb - set new FSB
  * @fsb: New FSB
- * 
+ *
  *   Sets new FSB
  */
 static int nforce2_set_fsb(unsigned int fsb)
@@ -186,7 +177,7 @@ static int nforce2_set_fsb(unsigned int fsb)
                 printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
                 return -EINVAL;
         }
-        
+
         tfsb = nforce2_fsb_read(0);
         if (!tfsb) {
                 printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
@@ -194,8 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb)
         }
 
         /* First write? Then set actual value */
-        pci_read_config_byte(nforce2_chipset_dev, 
-                             NFORCE2_PLLENABLE, (u8 *)&temp);
+        pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
         if (!temp) {
                 pll = nforce2_calc_pll(tfsb);
 
@@ -223,7 +213,7 @@ static int nforce2_set_fsb(unsigned int fsb)
                 /* Calculate the PLL reg. value */
                 if ((pll = nforce2_calc_pll(tfsb)) == -1)
                         return -EINVAL;
-                
+
                 nforce2_write_pll(pll);
 #ifdef NFORCE2_DELAY
                 mdelay(NFORCE2_DELAY);
@@ -239,7 +229,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 /**
  * nforce2_get - get the CPU frequency
  * @cpu: CPU number
- * 
+ *
  * Returns the CPU frequency
  */
 static unsigned int nforce2_get(unsigned int cpu)
@@ -354,10 +344,10 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 
         printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
                fid / 10, fid % 10);
-        
+
         /* Set maximum FSB to FSB at boot time */
         max_fsb = nforce2_fsb_read(1);
-        
+
         if(!max_fsb)
                 return -EIO;
 
@@ -398,17 +388,15 @@ static struct cpufreq_driver nforce2_driver = {
  * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
  *
  * Detects nForce2 A2 and C1 stepping
- * 
+ *
  */
 static unsigned int nforce2_detect_chipset(void)
 {
         u8 revision;
 
         nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-                                             PCI_DEVICE_ID_NVIDIA_NFORCE2,
-                                             PCI_ANY_ID,
-                                             PCI_ANY_ID,
-                                             NULL);
+                                        PCI_DEVICE_ID_NVIDIA_NFORCE2,
+                                        PCI_ANY_ID, PCI_ANY_ID, NULL);
 
         if (nforce2_chipset_dev == NULL)
                 return -ENODEV;
diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
index 3f7caa4ae6d6..f317276afa7a 100644
--- a/arch/i386/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
@@ -1,16 +1,16 @@
 /*
- *      elanfreq:       cpufreq driver for the AMD ELAN family
+ *      elanfreq:       cpufreq driver for the AMD ELAN family
  *
  *      (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
  *
- *      Parts of this code are (c) Sven Geggus <sven@geggus.net> 
+ *      Parts of this code are (c) Sven Geggus <sven@geggus.net>
  *
- *      All Rights Reserved. 
+ *      All Rights Reserved.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
  *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version. 
+ *      2 of the License, or (at your option) any later version.
  *
  *      2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
  *
@@ -28,7 +28,7 @@
 #include <asm/timex.h>
 #include <asm/io.h>
 
-#define REG_CSCIR 0x22          /* Chip Setup and Control Index Register    */
+#define REG_CSCIR 0x22          /* Chip Setup and Control Index Register    */
 #define REG_CSCDR 0x23          /* Chip Setup and Control Data  Register    */
 
 /* Module parameter */
@@ -41,7 +41,7 @@ struct s_elan_multiplier {
 };
 
 /*
- * It is important that the frequencies 
+ * It is important that the frequencies
  * are listed in ascending order here!
  */
 struct s_elan_multiplier elan_multiplier[] = {
@@ -72,78 +72,79 @@ static struct cpufreq_frequency_table elanfreq_table[] = {
  *      elanfreq_get_cpu_frequency: determine current cpu speed
  *
  *      Finds out at which frequency the CPU of the Elan SOC runs
- *      at the moment. Frequencies from 1 to 33 MHz are generated 
+ *      at the moment. Frequencies from 1 to 33 MHz are generated
  *      the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
- *      and have the rest of the chip running with 33 MHz. 
+ *      and have the rest of the chip running with 33 MHz.
  */
 
 static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
 {
-        u8 clockspeed_reg;    /* Clock Speed Register */
-        
+        u8 clockspeed_reg;    /* Clock Speed Register */
+
         local_irq_disable();
-        outb_p(0x80,REG_CSCIR);
-        clockspeed_reg = inb_p(REG_CSCDR);
+        outb_p(0x80,REG_CSCIR);
+        clockspeed_reg = inb_p(REG_CSCDR);
         local_irq_enable();
 
-        if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; }
+        if ((clockspeed_reg & 0xE0) == 0xE0)
+                return 0;
 
-        /* Are we in CPU clock multiplied mode (66/99 MHz)? */
-        if ((clockspeed_reg & 0xE0) == 0xC0) {
-                if ((clockspeed_reg & 0x01) == 0) {
+        /* Are we in CPU clock multiplied mode (66/99 MHz)? */
+        if ((clockspeed_reg & 0xE0) == 0xC0) {
+                if ((clockspeed_reg & 0x01) == 0)
                         return 66000;
-                } else {
-                        return 99000;             
-                }
-        }
+                else
+                        return 99000;
+        }
 
         /* 33 MHz is not 32 MHz... */
         if ((clockspeed_reg & 0xE0)==0xA0)
                 return 33000;
 
-        return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+        return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
 }
 
 
 /**
- *      elanfreq_set_cpu_frequency: Change the CPU core frequency
- *      @cpu: cpu number
+ *      elanfreq_set_cpu_frequency: Change the CPU core frequency
+ *      @cpu: cpu number
  *      @freq: frequency in kHz
  *
- *      This function takes a frequency value and changes the CPU frequency 
+ *      This function takes a frequency value and changes the CPU frequency
  *      according to this. Note that the frequency has to be checked by
  *      elanfreq_validatespeed() for correctness!
- *      
- *      There is no return value. 
+ *
+ *      There is no return value.
  */
 
-static void elanfreq_set_cpu_state (unsigned int state) {
-
+static void elanfreq_set_cpu_state (unsigned int state)
+{
         struct cpufreq_freqs    freqs;
 
         freqs.old = elanfreq_get_cpu_frequency(0);
         freqs.new = elan_multiplier[state].clock;
         freqs.cpu = 0; /* elanfreq.c is UP only driver */
-        
+
         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-        printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock);
+        printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
+                        elan_multiplier[state].clock);
 
 
-        /* 
-         * Access to the Elan's internal registers is indexed via    
-         * 0x22: Chip Setup & Control Register Index Register (CSCI) 
-         * 0x23: Chip Setup & Control Register Data  Register (CSCD) 
+        /*
+         * Access to the Elan's internal registers is indexed via
+         * 0x22: Chip Setup & Control Register Index Register (CSCI)
+         * 0x23: Chip Setup & Control Register Data  Register (CSCD)
          *
          */
 
-        /* 
-         * 0x40 is the Power Management Unit's Force Mode Register. 
+        /*
+         * 0x40 is the Power Management Unit's Force Mode Register.
          * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
          */
 
         local_irq_disable();
-        outb_p(0x40,REG_CSCIR);         /* Disable hyperspeed mode          */
+        outb_p(0x40,REG_CSCIR);         /* Disable hyperspeed mode */
         outb_p(0x00,REG_CSCDR);
         local_irq_enable();             /* wait till internal pipelines and */
         udelay(1000);                   /* buffers have cleaned up          */
@@ -166,10 +167,10 @@ static void elanfreq_set_cpu_state (unsigned int state) {
 
 /**
  *      elanfreq_validatespeed: test if frequency range is valid
- *      @policy: the policy to validate
+ *      @policy: the policy to validate
  *
- *      This function checks if a given frequency range in kHz is valid 
- *      for the hardware supported by the driver. 
+ *      This function checks if a given frequency range in kHz is valid
+ *      for the hardware supported by the driver.
  */
 
 static int elanfreq_verify (struct cpufreq_policy *policy)
@@ -177,11 +178,11 @@ static int elanfreq_verify (struct cpufreq_policy *policy)
         return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
 }
 
-static int elanfreq_target (struct cpufreq_policy *policy, 
-                            unsigned int target_freq, 
+static int elanfreq_target (struct cpufreq_policy *policy,
+                            unsigned int target_freq,
                             unsigned int relation)
 {
-        unsigned int    newstate = 0;
+        unsigned int newstate = 0;
 
         if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
                 return -EINVAL;
@@ -212,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
                 max_freq = elanfreq_get_cpu_frequency(0);
 
         /* table init */
-        for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+        for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
                 if (elanfreq_table[i].frequency > max_freq)
                         elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
         }
@@ -226,8 +227,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
         if (result)
                 return (result);
 
-        cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
-
+        cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
         return 0;
 }
 
@@ -268,9 +268,9 @@ static struct freq_attr* elanfreq_attr[] = {
 
 
 static struct cpufreq_driver elanfreq_driver = {
-        .get            = elanfreq_get_cpu_frequency,
-        .verify         = elanfreq_verify,
-        .target         = elanfreq_target,
+        .get            = elanfreq_get_cpu_frequency,
+        .verify         = elanfreq_verify,
+        .target         = elanfreq_target,
         .init           = elanfreq_cpu_init,
         .exit           = elanfreq_cpu_exit,
         .name           = "elanfreq",
@@ -279,23 +279,21 @@ static struct cpufreq_driver elanfreq_driver = {
 };
 
 
-static int __init elanfreq_init(void) 
-{       
+static int __init elanfreq_init(void)
+{
         struct cpuinfo_x86 *c = cpu_data;
 
         /* Test if we have the right hardware */
         if ((c->x86_vendor != X86_VENDOR_AMD) ||
-                (c->x86 != 4) || (c->x86_model!=10))
-        {
+                (c->x86 != 4) || (c->x86_model!=10)) {
                 printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
                 return -ENODEV;
         }
-        
         return cpufreq_register_driver(&elanfreq_driver);
 }
 
 
-static void __exit elanfreq_exit(void) 
+static void __exit elanfreq_exit(void)
 {
         cpufreq_unregister_driver(&elanfreq_driver);
 }
@@ -309,4 +307,3 @@ MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
 
 module_init(elanfreq_init);
 module_exit(elanfreq_exit);
-
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
index e86ea486c311..65b8fa2b0ee4 100644
--- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -6,12 +6,12 @@
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
- *      version 2 as published by the Free Software Foundation 
+ *      version 2 as published by the Free Software Foundation
  *
  *      The author(s) of this software shall not be held liable for damages
  *      of any nature resulting due to the use of this software. This
  *      software is provided AS-IS with no warranties.
- *      
+ *
  * Theoritical note:
  *
  *      (see Geode(tm) CS5530 manual (rev.4.1) page.56)
@@ -21,18 +21,18 @@
  *
  *      Suspend Modulation works by asserting and de-asserting the SUSP# pin
  *      to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
- *      the CPU enters an idle state. GX1 stops its core clock when SUSP# is 
+ *      the CPU enters an idle state. GX1 stops its core clock when SUSP# is
  *      asserted then power consumption is reduced.
  *
- *      Suspend Modulation's OFF/ON duration are configurable 
+ *      Suspend Modulation's OFF/ON duration are configurable
  *      with 'Suspend Modulation OFF Count Register'
  *      and 'Suspend Modulation ON Count Register'.
- *      These registers are 8bit counters that represent the number of 
+ *      These registers are 8bit counters that represent the number of
  *      32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
  *      to the processor.
  *
- *      These counters define a ratio which is the effective frequency 
- *      of operation of the system.
+ *      These counters define a ratio which is the effective frequency
+ *      of operation of the system.
  *
  *                             OFF Count
  *      F_eff = Fgx * ----------------------
@@ -40,24 +40,24 @@
  *
  *      0 <= On Count, Off Count <= 255
  *
- *      From these limits, we can get register values 
+ *      From these limits, we can get register values
  *
  *      off_duration + on_duration <= MAX_DURATION
  *      on_duration = off_duration * (stock_freq - freq) / freq
  *
- *      off_duration  =  (freq * DURATION) / stock_freq 
- *      on_duration = DURATION - off_duration 
+ *      off_duration  =  (freq * DURATION) / stock_freq
+ *      on_duration = DURATION - off_duration
  *
  *
  *---------------------------------------------------------------------------
  *
  * ChangeLog:
- *      Dec. 12, 2003   Hiroshi Miura <miura@da-cha.org>
- *              - fix on/off register mistake
- *              - fix cpu_khz calc when it stops cpu modulation.
+ *      Dec. 12, 2003   Hiroshi Miura <miura@da-cha.org>
+ *              - fix on/off register mistake
+ *              - fix cpu_khz calc when it stops cpu modulation.
  *
- *      Dec. 11, 2002   Hiroshi Miura <miura@da-cha.org>
- *              - rewrite for Cyrix MediaGX Cx5510/5520 and 
+ *      Dec. 11, 2002   Hiroshi Miura <miura@da-cha.org>
+ *              - rewrite for Cyrix MediaGX Cx5510/5520 and
  *                NatSemi Geode Cs5530(A).
  *
  *      Jul. ??, 2002  Zwane Mwaikambo <zwane@commfireservices.com>
@@ -74,40 +74,40 @@
  ************************************************************************/
 
 #include <linux/kernel.h>
-#include <linux/module.h> 
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/cpufreq.h>
 #include <linux/pci.h>
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/errno.h>
 
 /* PCI config registers, all at F0 */
-#define PCI_PMER1              0x80    /* power management enable register 1 */
-#define PCI_PMER2              0x81    /* power management enable register 2 */
-#define PCI_PMER3              0x82    /* power management enable register 3 */
-#define PCI_IRQTC              0x8c    /* irq speedup timer counter register:typical 2 to 4ms */
-#define PCI_VIDTC              0x8d    /* video speedup timer counter register: typical 50 to 100ms */
-#define PCI_MODOFF             0x94    /* suspend modulation OFF counter register, 1 = 32us */
-#define PCI_MODON              0x95    /* suspend modulation ON counter register */
-#define PCI_SUSCFG             0x96    /* suspend configuration register */
+#define PCI_PMER1       0x80    /* power management enable register 1 */
+#define PCI_PMER2       0x81    /* power management enable register 2 */
+#define PCI_PMER3       0x82    /* power management enable register 3 */
+#define PCI_IRQTC       0x8c    /* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC       0x8d    /* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF      0x94    /* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON       0x95    /* suspend modulation ON counter register */
+#define PCI_SUSCFG      0x96    /* suspend configuration register */
 
 /* PMER1 bits */
-#define GPM                    (1<<0)  /* global power management */
-#define GIT                    (1<<1)  /* globally enable PM device idle timers */
-#define GTR                    (1<<2)  /* globally enable IO traps */
-#define IRQ_SPDUP              (1<<3)  /* disable clock throttle during interrupt handling */
-#define VID_SPDUP              (1<<4)  /* disable clock throttle during vga video handling */
+#define GPM             (1<<0)  /* global power management */
+#define GIT             (1<<1)  /* globally enable PM device idle timers */
+#define GTR             (1<<2)  /* globally enable IO traps */
+#define IRQ_SPDUP       (1<<3)  /* disable clock throttle during interrupt handling */
+#define VID_SPDUP       (1<<4)  /* disable clock throttle during vga video handling */
 
 /* SUSCFG bits */
-#define SUSMOD                 (1<<0)  /* enable/disable suspend modulation */
-/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ 
-#define SMISPDUP               (1<<1)  /* select how SMI re-enable suspend modulation: */
-                                       /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
-#define SUSCFG                 (1<<2)  /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
-/* the belows support only with cs5530A */ 
-#define PWRSVE_ISA             (1<<3)  /* stop ISA clock  */
-#define PWRSVE                 (1<<4)  /* active idle */
+#define SUSMOD          (1<<0)  /* enable/disable suspend modulation */
+/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
+#define SMISPDUP        (1<<1)  /* select how SMI re-enable suspend modulation: */
+                                /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG          (1<<2)  /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the belows support only with cs5530A */
+#define PWRSVE_ISA      (1<<3)  /* stop ISA clock  */
+#define PWRSVE          (1<<4)  /* active idle */
 
 struct gxfreq_params {
         u8 on_duration;
@@ -128,7 +128,7 @@ module_param (pci_busclk, int, 0444);
 
 /* maximum duration for which the cpu may be suspended
  * (32us * MAX_DURATION). If no parameter is given, this defaults
- * to 255. 
+ * to 255.
  * Note that this leads to a maximum of 8 ms(!) where the CPU clock
  * is suspended -- processing power is just 0.39% of what it used to be,
  * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
@@ -144,17 +144,17 @@ module_param (max_duration, int, 0444);
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
 
 /**
- *      we can detect a core multipiler from dir0_lsb 
- *      from GX1 datasheet p.56, 
- *         MULT[3:0]:
- *         0000 = SYSCLK multiplied by 4 (test only)
- *         0001 = SYSCLK multiplied by 10
- *         0010 = SYSCLK multiplied by 4
- *         0011 = SYSCLK multiplied by 6
- *         0100 = SYSCLK multiplied by 9
- *         0101 = SYSCLK multiplied by 5
- *         0110 = SYSCLK multiplied by 7
- *         0111 = SYSCLK multiplied by 8
+ * we can detect a core multipiler from dir0_lsb
+ * from GX1 datasheet p.56,
+ *      MULT[3:0]:
+ *      0000 = SYSCLK multiplied by 4 (test only)
+ *      0001 = SYSCLK multiplied by 10
+ *      0010 = SYSCLK multiplied by 4
+ *      0011 = SYSCLK multiplied by 6
+ *      0100 = SYSCLK multiplied by 9
+ *      0101 = SYSCLK multiplied by 5
+ *      0110 = SYSCLK multiplied by 7
+ *      0111 = SYSCLK multiplied by 8
  *              of 33.3MHz
  **/
 static int gx_freq_mult[16] = {
@@ -164,17 +164,17 @@ static int gx_freq_mult[16] = {
 
 
 /****************************************************************
- *      Low Level chipset interface                             *
+ *      Low Level chipset interface                             *
  ****************************************************************/
 static struct pci_device_id gx_chipset_tbl[] __initdata = {
-        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
-        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
-        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
-        { 0, },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+        { 0, },
 };
 
 /**
- *     gx_detect_chipset:
+ * gx_detect_chipset:
  *
  **/
 static __init struct pci_dev *gx_detect_chipset(void)
@@ -182,17 +182,16 @@ static __init struct pci_dev *gx_detect_chipset(void)
         struct pci_dev *gx_pci = NULL;
 
         /* check if CPU is a MediaGX or a Geode. */
-        if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && 
+        if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
             (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
                 dprintk("error: no MediaGX/Geode processor found!\n");
-                return NULL;            
+                return NULL;
         }
 
         /* detect which companion chip is used */
         while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) {
-                if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) {
+                if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
                         return gx_pci;
-                }
         }
 
         dprintk("error: no supported chipset found!\n");
@@ -200,24 +199,24 @@ static __init struct pci_dev *gx_detect_chipset(void)
 }
 
 /**
- *      gx_get_cpuspeed:
+ * gx_get_cpuspeed:
  *
  * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
  */
 static unsigned int gx_get_cpuspeed(unsigned int cpu)
 {
-        if ((gx_params->pci_suscfg & SUSMOD) == 0) 
+        if ((gx_params->pci_suscfg & SUSMOD) == 0)
                 return stock_freq;
 
-        return (stock_freq * gx_params->off_duration) 
+        return (stock_freq * gx_params->off_duration)
                 / (gx_params->on_duration + gx_params->off_duration);
 }
 
 /**
  *      gx_validate_speed:
  *      determine current cpu speed
- *       
-**/
+ *
+ **/
 
 static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
 {
@@ -230,7 +229,7 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off
         *on_duration=0;
 
         for (i=max_duration; i>0; i--) {
-                tmp_off = ((khz * i) / stock_freq) & 0xff; 
+                tmp_off = ((khz * i) / stock_freq) & 0xff;
                 tmp_on = i - tmp_off;
                 tmp_freq = (stock_freq * tmp_off) / i;
                 /* if this relation is closer to khz, use this. If it's equal,
@@ -247,18 +246,17 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off
 
 
 /**
- *      gx_set_cpuspeed:
- *              set cpu speed in khz.
+ * gx_set_cpuspeed:
+ * set cpu speed in khz.
  **/
 
 static void gx_set_cpuspeed(unsigned int khz)
 {
-        u8 suscfg, pmer1;
+        u8 suscfg, pmer1;
         unsigned int new_khz;
         unsigned long flags;
         struct cpufreq_freqs freqs;
 
-
         freqs.cpu = 0;
         freqs.old = gx_get_cpuspeed(0);
 
@@ -303,18 +301,18 @@ static void gx_set_cpuspeed(unsigned int khz)
         pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
         pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
 
-        pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
-        pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+        pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+        pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
 
-        local_irq_restore(flags);
+        local_irq_restore(flags);
 
         gx_params->pci_suscfg = suscfg;
 
         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
-        dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
-                gx_params->on_duration * 32, gx_params->off_duration * 32);
-        dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); 
+        dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+                gx_params->on_duration * 32, gx_params->off_duration * 32);
+        dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
 }
 
 /****************************************************************
@@ -322,10 +320,10 @@ static void gx_set_cpuspeed(unsigned int khz)
  ****************************************************************/
 
 /*
- *      cpufreq_gx_verify: test if frequency range is valid 
+ *      cpufreq_gx_verify: test if frequency range is valid
  *
- *      This function checks if a given frequency range in kHz is valid 
- *      for the hardware supported by the driver. 
+ *      This function checks if a given frequency range in kHz is valid
+ *      for the hardware supported by the driver.
  */
 
 static int cpufreq_gx_verify(struct cpufreq_policy *policy)
@@ -333,8 +331,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
         unsigned int tmp_freq = 0;
         u8 tmp1, tmp2;
 
-        if (!stock_freq || !policy)
-                return -EINVAL;
+        if (!stock_freq || !policy)
+                return -EINVAL;
 
         policy->cpu = 0;
         cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
@@ -342,14 +340,14 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
         /* it needs to be assured that at least one supported frequency is
          * within policy->min and policy->max. If it is not, policy->max
          * needs to be increased until one freuqency is supported.
-         * policy->min may not be decreased, though. This way we guarantee a 
+         * policy->min may not be decreased, though. This way we guarantee a
          * specific processing capacity.
          */
         tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
-        if (tmp_freq < policy->min) 
+        if (tmp_freq < policy->min)
                 tmp_freq += stock_freq / max_duration;
         policy->min = tmp_freq;
-        if (policy->min > policy->max) 
+        if (policy->min > policy->max)
                 policy->max = tmp_freq;
         tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
         if (tmp_freq > policy->max)
@@ -358,12 +356,12 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
         if (policy->max < policy->min)
                 policy->max = policy->min;
         cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
-        
+
         return 0;
 }
 
 /*
- *      cpufreq_gx_target:  
+ *      cpufreq_gx_target:
  *
  */
 static int cpufreq_gx_target(struct cpufreq_policy *policy,
@@ -373,8 +371,8 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy,
         u8 tmp1, tmp2;
         unsigned int tmp_freq;
 
-        if (!stock_freq || !policy)
-                return -EINVAL;
+        if (!stock_freq || !policy)
+                return -EINVAL;
 
         policy->cpu = 0;
 
@@ -431,7 +429,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
         return 0;
 }
 
-/* 
+/*
  * cpufreq_gx_init:
  *   MediaGX/Geode GX initialize cpufreq driver
  */
@@ -452,7 +450,7 @@ static int __init cpufreq_gx_init(void)
         u32 class_rev;
 
         /* Test if we have the right hardware */
-        if ((gx_pci = gx_detect_chipset()) == NULL) 
+        if ((gx_pci = gx_detect_chipset()) == NULL)
                 return -ENODEV;
 
         /* check whether module parameters are sane */
@@ -478,7 +476,7 @@ static int __init cpufreq_gx_init(void)
         pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
         params->pci_rev = class_rev && 0xff;
 
-        if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { 
+        if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
                 kfree(params);
                 return ret;                   /* register error! */
         }
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h
index 2a495c162ec7..d3a95d77ee85 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.h
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h
@@ -234,7 +234,7 @@ static int __initdata ezrat_eblcr[32] = {
 
 /*
  * VIA C3 Nehemiah */
- 
+
 static int __initdata nehemiah_a_clock_ratio[32] = {
         100, /* 0000 -> 10.0x */
         160, /* 0001 -> 16.0x */
@@ -446,7 +446,7 @@ static int __initdata nehemiah_c_eblcr[32] = {
           /* end of table  */
 };
 
-/* 
+/*
  * Voltage scales. Div/Mod by 1000 to get actual voltage.
  * Which scale to use depends on the VRM type in use.
  */
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index cc73a7ae34bc..0e1fc5c45242 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -14,7 +14,7 @@
  *      The author(s) of this software shall not be held liable for damages
  *      of any nature resulting due to the use of this software. This
  *      software is provided AS-IS with no warranties.
- *      
+ *
  *      Date            Errata                  Description
  *      20020525        N44, O17        12.5% or 25% DC causes lockup
  *
@@ -22,7 +22,7 @@
 
 #include <linux/config.h>
 #include <linux/kernel.h>
-#include <linux/module.h> 
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/cpufreq.h>
@@ -30,7 +30,7 @@
 #include <linux/cpumask.h>
 #include <linux/sched.h>        /* current / set_cpus_allowed() */
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/msr.h>
 #include <asm/timex.h>
 
@@ -79,7 +79,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
         } else {
                 dprintk("CPU#%d setting duty cycle to %d%%\n",
                         cpu, ((125 * newstate) / 10));
-                /* bits 63 - 5  : reserved 
+                /* bits 63 - 5  : reserved
                  * bit  4       : enable/disable
                  * bits 3-1     : duty cycle
                  * bit  0       : reserved
@@ -132,7 +132,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
         }
 
         /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
-         * Developer's Manual, Volume 3 
+         * Developer's Manual, Volume 3
          */
         cpus_allowed = current->cpus_allowed;
 
@@ -206,7 +206,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
         return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
 }
 
- 
+
 
 static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 {
@@ -234,7 +234,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
                 dprintk("has errata -- disabling frequencies lower than 2ghz\n");
                 break;
         }
-        
+
         /* get max frequency */
         stock_freq = cpufreq_p4_get_frequency(c);
         if (!stock_freq)
@@ -250,7 +250,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
                         p4clockmod_table[i].frequency = (stock_freq * i)/8;
         }
         cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
-        
+
         /* cpuinfo and default policy values */
         policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
         policy->cpuinfo.transition_latency = 1000000; /* assumed */
@@ -262,7 +262,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 
 static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
 {
-        cpufreq_frequency_table_put_attr(policy->cpu);    
+        cpufreq_frequency_table_put_attr(policy->cpu);
         return 0;
 }
 
@@ -298,7 +298,7 @@ static struct freq_attr* p4clockmod_attr[] = {
 };
 
 static struct cpufreq_driver p4clockmod_driver = {
-        .verify         = cpufreq_p4_verify,
+        .verify         = cpufreq_p4_verify,
         .target         = cpufreq_p4_target,
         .init           = cpufreq_p4_cpu_init,
         .exit           = cpufreq_p4_cpu_exit,
@@ -310,12 +310,12 @@ static struct cpufreq_driver p4clockmod_driver = {
 
 
 static int __init cpufreq_p4_init(void)
-{       
+{
         struct cpuinfo_x86 *c = cpu_data;
         int ret;
 
         /*
-         * THERM_CONTROL is architectural for IA32 now, so 
+         * THERM_CONTROL is architectural for IA32 now, so
          * we can rely on the capability checks
          */
         if (c->x86_vendor != X86_VENDOR_INTEL)
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
index 222f8cfe3c57..f89524051e4a 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
@@ -8,7 +8,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h> 
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
@@ -50,7 +50,7 @@ static int powernow_k6_get_cpu_multiplier(void)
 {
         u64             invalue = 0;
         u32             msrval;
-        
+
         msrval = POWERNOW_IOPORT + 0x1;
         wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
         invalue=inl(POWERNOW_IOPORT + 0x8);
@@ -81,7 +81,7 @@ static void powernow_k6_set_state (unsigned int best_i)
         freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
         freqs.new = busfreq * clock_ratio[best_i].index;
         freqs.cpu = 0; /* powernow-k6.c is UP only driver */
-        
+
         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
         /* we now need to transform best_i to the BVC format, see AMD#23446 */
@@ -152,7 +152,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
         busfreq = cpu_khz / max_multiplier;
 
         /* table init */
-        for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+        for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
                 if (clock_ratio[i].index > max_multiplier)
                         clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
                 else
@@ -182,7 +182,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
                         powernow_k6_set_state(i);
         }
         cpufreq_frequency_table_put_attr(policy->cpu);
-        return 0;
+        return 0;
 }
 
 static unsigned int powernow_k6_get(unsigned int cpu)
@@ -196,8 +196,8 @@ static struct freq_attr* powernow_k6_attr[] = {
 };
 
 static struct cpufreq_driver powernow_k6_driver = {
-        .verify         = powernow_k6_verify,
-        .target         = powernow_k6_target,
+        .verify         = powernow_k6_verify,
+        .target         = powernow_k6_target,
         .init           = powernow_k6_cpu_init,
         .exit           = powernow_k6_cpu_exit,
         .get            = powernow_k6_get,
@@ -215,7 +215,7 @@ static struct cpufreq_driver powernow_k6_driver = {
  * on success.
  */
 static int __init powernow_k6_init(void)
-{       
+{
         struct cpuinfo_x86      *c = cpu_data;
 
         if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
index edcd626001da..2bf4237cb94e 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -199,8 +199,8 @@ static int get_ranges (unsigned char *pst)
                 powernow_table[j].index |= (vid << 8); /* upper 8 bits */
 
                 dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
-                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 
-                         fid_codes[fid] % 10, speed/1000, vid,  
+                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+                         fid_codes[fid] % 10, speed/1000, vid,
                          mobile_vid_table[vid]/1000,
                          mobile_vid_table[vid]%1000);
         }
@@ -368,8 +368,8 @@ static int powernow_acpi_init(void)
                 }
 
                 dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
-                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 
-                         fid_codes[fid] % 10, speed/1000, vid,  
+                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
+                         fid_codes[fid] % 10, speed/1000, vid,
                          mobile_vid_table[vid]/1000,
                          mobile_vid_table[vid]%1000);
 
@@ -460,7 +460,7 @@ static int powernow_decode_bios (int maxfid, int startvid)
                                     (maxfid==pst->maxfid) && (startvid==pst->startvid))
                                 {
                                         dprintk ("PST:%d (@%p)\n", i, pst);
-                                        dprintk (" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n", 
+                                        dprintk (" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
                                                  pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
 
                                         ret = get_ranges ((char *) pst + sizeof (struct pst_s));
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 3b3a94987d10..e85e90524df7 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -83,11 +83,10 @@ static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid)
  */
 static u32 convert_fid_to_vco_fid(u32 fid)
 {
-        if (fid < HI_FID_TABLE_BOTTOM) {
+        if (fid < HI_FID_TABLE_BOTTOM)
                 return 8 + (2 * fid);
-        } else {
+        else
                 return fid;
-        }
 }
 
 /*
@@ -177,7 +176,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
                 if (i++ > 100) {
                         printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
                         return 1;
-                }                       
+                }
         } while (query_current_values_with_pending_wait(data));
 
         count_off_irt(data);
@@ -782,9 +781,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
                 /* verify only 1 entry from the lo frequency table */
                 if (fid < HI_FID_TABLE_BOTTOM) {
                         if (cntlofreq) {
-                                /* if both entries are the same, ignore this
-                                 * one... 
-                                 */
+                                /* if both entries are the same, ignore this one ... */
                                 if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
                                     (powernow_table[i].index != powernow_table[cntlofreq].index)) {
                                         printk(KERN_ERR PFX "Too many lo freq table entries\n");
@@ -856,7 +853,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
         dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
 
         /* fid are the lower 8 bits of the index we stored into
-         * the cpufreq frequency table in find_psb_table, vid are 
+         * the cpufreq frequency table in find_psb_table, vid are
          * the upper 8 bits.
          */
 
@@ -1050,7 +1047,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
         pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
         pol->cpus = cpu_core_map[pol->cpu];
 
-        /* Take a crude guess here. 
+        /* Take a crude guess here.
          * That guess was in microseconds, so multiply with 1000 */
         pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
             + (3 * (1 << data->irt) * 10)) * 1000;
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index d0de37d58e9a..00ea899c17e1 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -63,7 +63,7 @@ struct powernow_k8_data {
 #define MSR_C_LO_VID_SHIFT        8
 
 /* Field definitions within the FID VID High Control MSR : */
-#define MSR_C_HI_STP_GNT_TO       0x000fffff
+#define MSR_C_HI_STP_GNT_TO       0x000fffff
 
 /* Field definitions within the FID VID Low Status MSR : */
 #define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
@@ -123,7 +123,7 @@ struct powernow_k8_data {
  * Most values of interest are enocoded in a single field of the _PSS
  * entries: the "control" value.
  */
-                                                                                                    
+
 #define IRT_SHIFT      30
 #define RVO_SHIFT      28
 #define EXT_TYPE_SHIFT 27
@@ -185,7 +185,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned
 #ifndef for_each_cpu_mask
 #define for_each_cpu_mask(i,mask) for (i=0;i<1;i++)
 #endif
-                                                                                
+
 #ifdef CONFIG_SMP
 static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
 {
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
index 7c47005a1805..4f46cac155c4 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -9,7 +9,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h> 
+#include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
@@ -36,8 +36,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
         /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
         struct {
                 unsigned int ratio;     /* Frequency Multiplier (x10) */
-                u8 bitmap;              /* power on configuration bits
-                                           [27, 25:22] (in MSR 0x2a) */
+                u8 bitmap;              /* power on configuration bits
+                                        [27, 25:22] (in MSR 0x2a) */
         } msr_decode_mult [] = {
                 { 30, 0x01 },
                 { 35, 0x05 },
@@ -58,9 +58,9 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 
         /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
         struct {
-                unsigned int value;     /* Front Side Bus speed in MHz */
-                u8 bitmap;              /* power on configuration bits [18: 19]
-                                           (in MSR 0x2a) */
+                unsigned int value;     /* Front Side Bus speed in MHz */
+                u8 bitmap;              /* power on configuration bits [18: 19]
+                                        (in MSR 0x2a) */
         } msr_decode_fsb [] = {
                 {  66, 0x0 },
                 { 100, 0x2 },
@@ -68,8 +68,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
                 {   0, 0xff}
         };
 
-        u32     msr_lo, msr_tmp;
-        int     i = 0, j = 0;
+        u32 msr_lo, msr_tmp;
+        int i = 0, j = 0;
 
         /* read MSR 0x2a - we only need the low 32 bits */
         rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
@@ -106,7 +106,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 
 static unsigned int pentiumM_get_frequency(void)
 {
-        u32     msr_lo, msr_tmp;
+        u32 msr_lo, msr_tmp;
 
         rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
         dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
@@ -134,7 +134,7 @@ static unsigned int pentium4_get_frequency(void)
 
         dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
 
-        /* decode the FSB: see IA-32 Intel (C) Architecture Software 
+        /* decode the FSB: see IA-32 Intel (C) Architecture Software
          * Developer's Manual, Volume 3: System Prgramming Guide,
          * revision #12 in Table B-1: MSRs in the Pentium 4 and
          * Intel Xeon Processors, on page B-4 and B-5.
@@ -170,7 +170,7 @@ static unsigned int pentium4_get_frequency(void)
         return (fsb * mult);
 }
 
- 
+
 unsigned int speedstep_get_processor_frequency(unsigned int processor)
 {
         switch (processor) {
@@ -198,11 +198,11 @@ EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
 unsigned int speedstep_detect_processor (void)
 {
         struct cpuinfo_x86 *c = cpu_data;
-        u32                     ebx, msr_lo, msr_hi;
+        u32 ebx, msr_lo, msr_hi;
 
         dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
 
-        if ((c->x86_vendor != X86_VENDOR_INTEL) || 
+        if ((c->x86_vendor != X86_VENDOR_INTEL) ||
             ((c->x86 != 6) && (c->x86 != 0xF)))
                 return 0;
 
@@ -218,15 +218,15 @@ unsigned int speedstep_detect_processor (void)
                 dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
 
                 switch (c->x86_mask) {
-                case 4: 
+                case 4:
                         /*
-                         * B-stepping [M-P4-M] 
+                         * B-stepping [M-P4-M]
                          * sample has ebx = 0x0f, production has 0x0e.
                          */
                         if ((ebx == 0x0e) || (ebx == 0x0f))
                                 return SPEEDSTEP_PROCESSOR_P4M;
                         break;
-                case 7: 
+                case 7:
                         /*
                          * C-stepping [M-P4-M]
                          * needs to have ebx=0x0e, else it's a celeron:
@@ -253,7 +253,7 @@ unsigned int speedstep_detect_processor (void)
                          * also, M-P4M HTs have ebx=0x8, too
                          * For now, they are distinguished by the model_id string
                          */
-                        if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) 
+                        if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL))
                                 return SPEEDSTEP_PROCESSOR_P4M;
                         break;
                 default:
@@ -264,8 +264,7 @@ unsigned int speedstep_detect_processor (void)
 
         switch (c->x86_model) {
         case 0x0B: /* Intel PIII [Tualatin] */
-                /* cpuid_ebx(1) is 0x04 for desktop PIII, 
-                                   0x06 for mobile PIII-M */
+                /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */
                 ebx = cpuid_ebx(0x00000001);
                 dprintk("ebx is %x\n", ebx);
 
@@ -275,9 +274,8 @@ unsigned int speedstep_detect_processor (void)
                         return 0;
 
                 /* So far all PIII-M processors support SpeedStep. See
-                 * Intel's 24540640.pdf of June 2003 
+                 * Intel's 24540640.pdf of June 2003
                  */
-
                 return SPEEDSTEP_PROCESSOR_PIII_T;
 
         case 0x08: /* Intel PIII [Coppermine] */
@@ -399,7 +397,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
                 }
         }
 
- out:
+out:
         local_irq_restore(flags);
         return (ret);
 }
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
index 6a727fd3a77e..b735429c50b4 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
@@ -14,7 +14,7 @@
 
 #define SPEEDSTEP_PROCESSOR_PIII_C_EARLY        0x00000001  /* Coppermine core */
 #define SPEEDSTEP_PROCESSOR_PIII_C              0x00000002  /* Coppermine core */
-#define SPEEDSTEP_PROCESSOR_PIII_T              0x00000003  /* Tualatin core */
+#define SPEEDSTEP_PROCESSOR_PIII_T              0x00000003  /* Tualatin core */
 #define SPEEDSTEP_PROCESSOR_P4M                 0x00000004  /* P4-M  */
 
 /* the following processors are not speedstep-capable and are not auto-detected
@@ -25,8 +25,8 @@
 
 /* speedstep states -- only two of them */
 
-#define SPEEDSTEP_HIGH                  0x00000000
-#define SPEEDSTEP_LOW                   0x00000001
+#define SPEEDSTEP_HIGH  0x00000000
+#define SPEEDSTEP_LOW   0x00000001
 
 
 /* detect a speedstep-capable processor */
@@ -36,13 +36,13 @@ extern unsigned int speedstep_detect_processor (void);
 extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
 
 
-/* detect the low and high speeds of the processor. The callback 
- * set_state"'s first argument is either SPEEDSTEP_HIGH or 
- * SPEEDSTEP_LOW; the second argument is zero so that no 
+/* detect the low and high speeds of the processor. The callback
+ * set_state"'s first argument is either SPEEDSTEP_HIGH or
+ * SPEEDSTEP_LOW; the second argument is zero so that no
  * cpufreq_notify_transition calls are initiated.
  */
 extern unsigned int speedstep_get_freqs(unsigned int processor,
-          unsigned int *low_speed,
-          unsigned int *high_speed,
-          unsigned int *transition_latency,
-          void (*set_state) (unsigned int state));
+        unsigned int *low_speed,
+        unsigned int *high_speed,
+        unsigned int *transition_latency,
+        void (*set_state) (unsigned int state));
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
index 28cc5d524afc..336ba49e526d 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -13,8 +13,8 @@
  *********************************************************************/
 
 #include <linux/kernel.h>
-#include <linux/module.h> 
-#include <linux/moduleparam.h> 
+#include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/pci.h>
@@ -28,21 +28,21 @@
  *
  * These parameters are got from IST-SMI BIOS call.
  * If user gives it, these are used.
- * 
+ *
  */
-static int              smi_port        = 0;
-static int              smi_cmd         = 0;
-static unsigned int     smi_sig         = 0;
+static int smi_port = 0;
+static int smi_cmd = 0;
+static unsigned int smi_sig = 0;
 
 /* info about the processor */
-static unsigned int     speedstep_processor = 0;
+static unsigned int speedstep_processor = 0;
 
-/* 
- *   There are only two frequency states for each processor. Values
+/*
+ * There are only two frequency states for each processor. Values
  * are in kHz for the time being.
  */
 static struct cpufreq_frequency_table speedstep_freqs[] = {
-        {SPEEDSTEP_HIGH,        0},
+        {SPEEDSTEP_HIGH,        0},
         {SPEEDSTEP_LOW,         0},
         {0,                     CPUFREQ_TABLE_END},
 };
@@ -123,7 +123,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
         *low  = low_mhz  * 1000;
 
         return result;
-} 
+}
 
 /**
  * speedstep_get_state - set the SpeedStep state
@@ -204,7 +204,7 @@ static void speedstep_set_state (unsigned int state)
  * speedstep_target - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: new freq
- * @relation: 
+ * @relation:
  *
  * Sets a new CPUFreq policy/freq.
  */
@@ -283,7 +283,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
         state = speedstep_get_state();
         speed = speedstep_freqs[state].frequency;
 
-        dprintk("currently at %s speed setting - %i MHz\n", 
+        dprintk("currently at %s speed setting - %i MHz\n",
                 (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
                 (speed / 1000));
 
@@ -296,7 +296,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
         if (result)
                 return (result);
 
-        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
 
         return 0;
 }
@@ -332,8 +332,8 @@ static struct freq_attr* speedstep_attr[] = {
 
 static struct cpufreq_driver speedstep_driver = {
         .name           = "speedstep-smi",
-        .verify         = speedstep_verify,
-        .target         = speedstep_target,
+        .verify         = speedstep_verify,
+        .target         = speedstep_target,
         .init           = speedstep_cpu_init,
         .exit           = speedstep_cpu_exit,
         .get            = speedstep_get,
@@ -370,13 +370,12 @@ static int __init speedstep_init(void)
                 return -ENODEV;
         }
 
-        dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", 
+        dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
                 ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
 
-
-        /* Error if no IST-SMI BIOS or no PARM 
+        /* Error if no IST-SMI BIOS or no PARM
                  sig= 'ISGE' aka 'Intel Speedstep Gate E' */
-        if ((ist_info.signature !=  0x47534943) && ( 
+        if ((ist_info.signature !=  0x47534943) && (
             (smi_port == 0) || (smi_cmd == 0)))
                 return -ENODEV;
 
@@ -386,17 +385,15 @@ static int __init speedstep_init(void)
                 smi_sig = ist_info.signature;
 
         /* setup smi_port from MODLULE_PARM or BIOS */
-        if ((smi_port > 0xff) || (smi_port < 0)) {
+        if ((smi_port > 0xff) || (smi_port < 0))
                 return -EINVAL;
-        } else if (smi_port == 0) {
+        else if (smi_port == 0)
                 smi_port = ist_info.command & 0xff;
-        }
 
-        if ((smi_cmd > 0xff) || (smi_cmd < 0)) {
+        if ((smi_cmd > 0xff) || (smi_cmd < 0))
                 return -EINVAL;
-        } else if (smi_cmd == 0) {
+        else if (smi_cmd == 0)
                 smi_cmd = (ist_info.command >> 16) & 0xff;
-        }
 
         return cpufreq_register_driver(&speedstep_driver);
 }