[CPUFREQ] the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI

This patch contains the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

2 files changed, 18 insertions, 276 deletions

diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index e77754ca94b4..094118ba00da 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -116,7 +116,7 @@ config X86_GX_SUSPMOD
 config X86_SPEEDSTEP_CENTRINO
         tristate "Intel Enhanced SpeedStep"
         select CPU_FREQ_TABLE
-        select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI)
+        select X86_SPEEDSTEP_CENTRINO_TABLE
         help
           This adds the CPUFreq driver for Enhanced SpeedStep enabled
           mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
@@ -128,20 +128,6 @@ config X86_SPEEDSTEP_CENTRINO
 
           If in doubt, say N.
 
-config X86_SPEEDSTEP_CENTRINO_ACPI
-        bool "Use ACPI tables to decode valid frequency/voltage (deprecated)"
-        depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
-        depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
-        help
-          This is deprecated and this functionality is now merged into
-          acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
-          speedstep_centrino.
-          Use primarily the information provided in the BIOS ACPI tables
-          to determine valid CPU frequency and voltage pairings. It is
-          required for the driver to work on non-Banias CPUs.
-
-          If in doubt, say Y.
-
 config X86_SPEEDSTEP_CENTRINO_TABLE
         bool "Built-in tables for Banias CPUs"
         depends on X86_SPEEDSTEP_CENTRINO
@@ -237,7 +223,7 @@ comment "shared options"
 config X86_ACPI_CPUFREQ_PROC_INTF
         bool "/proc/acpi/processor/../performance interface (deprecated)"
         depends on PROC_FS
-        depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
+        depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
         help
           This enables the deprecated /proc/acpi/processor/../performance
           interface. While it is helpful for debugging, the generic,
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index 35489fd68852..6c5dc2c85aeb 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -21,12 +21,6 @@
 #include <linux/delay.h>
 #include <linux/compiler.h>
 
-#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
-#include <linux/acpi.h>
-#include <linux/dmi.h>
-#include <acpi/processor.h>
-#endif
-
 #include <asm/msr.h>
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
@@ -257,9 +251,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
                 /* Matched a non-match */
                 dprintk("no table support for CPU model \"%s\"\n",
                        cpu->x86_model_id);
-#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
-                dprintk("try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
-#endif
+                dprintk("try using the acpi-cpufreq driver\n");
                 return -ENOENT;
         }
 
@@ -346,213 +338,6 @@ static unsigned int get_cur_freq(unsigned int cpu)
 }
 
 
-#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
-
-static struct acpi_processor_performance *acpi_perf_data[NR_CPUS];
-
-/*
- * centrino_cpu_early_init_acpi - Do the preregistering with ACPI P-States
- * library
- *
- * Before doing the actual init, we need to do _PSD related setup whenever
- * supported by the BIOS. These are handled by this early_init routine.
- */
-static int centrino_cpu_early_init_acpi(void)
-{
-        unsigned int    i, j;
-        struct acpi_processor_performance       *data;
-
-        for_each_possible_cpu(i) {
-                data = kzalloc(sizeof(struct acpi_processor_performance), 
-                                GFP_KERNEL);
-                if (!data) {
-                        for_each_possible_cpu(j) {
-                                kfree(acpi_perf_data[j]);
-                                acpi_perf_data[j] = NULL;
-                        }
-                        return (-ENOMEM);
-                }
-                acpi_perf_data[i] = data;
-        }
-
-        acpi_processor_preregister_performance(acpi_perf_data);
-        return 0;
-}
-
-
-#ifdef CONFIG_SMP
-/*
- * Some BIOSes do SW_ANY coordination internally, either set it up in hw
- * or do it in BIOS firmware and won't inform about it to OS. If not
- * detected, this has a side effect of making CPU run at a different speed
- * than OS intended it to run at. Detect it and handle it cleanly.
- */
-static int bios_with_sw_any_bug;
-static int sw_any_bug_found(struct dmi_system_id *d)
-{
-        bios_with_sw_any_bug = 1;
-        return 0;
-}
-
-static struct dmi_system_id sw_any_bug_dmi_table[] = {
-        {
-                .callback = sw_any_bug_found,
-                .ident = "Supermicro Server X6DLP",
-                .matches = {
-                        DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
-                        DMI_MATCH(DMI_BIOS_VERSION, "080010"),
-                        DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
-                },
-        },
-        { }
-};
-#endif
-
-/*
- * centrino_cpu_init_acpi - register with ACPI P-States library
- *
- * Register with the ACPI P-States library (part of drivers/acpi/processor.c)
- * in order to determine correct frequency and voltage pairings by reading
- * the _PSS of the ACPI DSDT or SSDT tables.
- */
-static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
-{
-        unsigned long                   cur_freq;
-        int                             result = 0, i;
-        unsigned int                    cpu = policy->cpu;
-        struct acpi_processor_performance       *p;
-
-        p = acpi_perf_data[cpu];
-
-        /* register with ACPI core */
-        if (acpi_processor_register_performance(p, cpu)) {
-                dprintk(PFX "obtaining ACPI data failed\n");
-                return -EIO;
-        }
-
-        policy->shared_type = p->shared_type;
-        /*
-         * Will let policy->cpus know about dependency only when software 
-         * coordination is required.
-         */
-        if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
-            policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
-                policy->cpus = p->shared_cpu_map;
-        }
-
-#ifdef CONFIG_SMP
-        dmi_check_system(sw_any_bug_dmi_table);
-        if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) {
-                policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-                policy->cpus = cpu_core_map[cpu];
-        }
-#endif
-
-        /* verify the acpi_data */
-        if (p->state_count <= 1) {
-                dprintk("No P-States\n");
-                result = -ENODEV;
-                goto err_unreg;
-        }
-
-        if ((p->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-            (p->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
-                dprintk("Invalid control/status registers (%x - %x)\n",
-                        p->control_register.space_id, p->status_register.space_id);
-                result = -EIO;
-                goto err_unreg;
-        }
-
-        for (i=0; i<p->state_count; i++) {
-                if ((p->states[i].control & INTEL_MSR_RANGE) !=
-                    (p->states[i].status & INTEL_MSR_RANGE)) {
-                        dprintk("Different MSR bits in control (%llu) and status (%llu)\n",
-                                p->states[i].control, p->states[i].status);
-                        result = -EINVAL;
-                        goto err_unreg;
-                }
-
-                if (!p->states[i].core_frequency) {
-                        dprintk("Zero core frequency for state %u\n", i);
-                        result = -EINVAL;
-                        goto err_unreg;
-                }
-
-                if (p->states[i].core_frequency > p->states[0].core_frequency) {
-                        dprintk("P%u has larger frequency (%llu) than P0 (%llu), skipping\n", i,
-                                p->states[i].core_frequency, p->states[0].core_frequency);
-                        p->states[i].core_frequency = 0;
-                        continue;
-                }
-        }
-
-        centrino_model[cpu] = kzalloc(sizeof(struct cpu_model), GFP_KERNEL);
-        if (!centrino_model[cpu]) {
-                result = -ENOMEM;
-                goto err_unreg;
-        }
-
-        centrino_model[cpu]->model_name=NULL;
-        centrino_model[cpu]->max_freq = p->states[0].core_frequency * 1000;
-        centrino_model[cpu]->op_points =  kmalloc(sizeof(struct cpufreq_frequency_table) *
-                                             (p->state_count + 1), GFP_KERNEL);
-        if (!centrino_model[cpu]->op_points) {
-                result = -ENOMEM;
-                goto err_kfree;
-        }
-
-        for (i=0; i<p->state_count; i++) {
-                centrino_model[cpu]->op_points[i].index = p->states[i].control & INTEL_MSR_RANGE;
-                centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000;
-                dprintk("adding state %i with frequency %u and control value %04x\n", 
-                        i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);
-        }
-        centrino_model[cpu]->op_points[p->state_count].frequency = CPUFREQ_TABLE_END;
-
-        cur_freq = get_cur_freq(cpu);
-
-        for (i=0; i<p->state_count; i++) {
-                if (!p->states[i].core_frequency) {
-                        dprintk("skipping state %u\n", i);
-                        centrino_model[cpu]->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
-                        continue;
-                }
-                
-                if (extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0) !=
-                    (centrino_model[cpu]->op_points[i].frequency)) {
-                        dprintk("Invalid encoded frequency (%u vs. %u)\n",
-                                extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0),
-                                centrino_model[cpu]->op_points[i].frequency);
-                        result = -EINVAL;
-                        goto err_kfree_all;
-                }
-
-                if (cur_freq == centrino_model[cpu]->op_points[i].frequency)
-                        p->state = i;
-        }
-
-        /* notify BIOS that we exist */
-        acpi_processor_notify_smm(THIS_MODULE);
-        printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI "
-               "config is deprecated.\n "
-               "Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.\n" );
-
-        return 0;
-
- err_kfree_all:
-        kfree(centrino_model[cpu]->op_points);
- err_kfree:
-        kfree(centrino_model[cpu]);
- err_unreg:
-        acpi_processor_unregister_performance(p, cpu);
-        dprintk(PFX "invalid ACPI data\n");
-        return (result);
-}
-#else
-static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; }
-static inline int centrino_cpu_early_init_acpi(void) { return 0; }
-#endif
-
 static int centrino_cpu_init(struct cpufreq_policy *policy)
 {
         struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu];
@@ -568,27 +353,25 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
         if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
                 centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
 
-        if (centrino_cpu_init_acpi(policy)) {
-                if (policy->cpu != 0)
-                        return -ENODEV;
+        if (policy->cpu != 0)
+                return -ENODEV;
 
-                for (i = 0; i < N_IDS; i++)
-                        if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
-                                break;
+        for (i = 0; i < N_IDS; i++)
+                if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
+                        break;
 
-                if (i != N_IDS)
-                        centrino_cpu[policy->cpu] = &cpu_ids[i];
+        if (i != N_IDS)
+                centrino_cpu[policy->cpu] = &cpu_ids[i];
 
-                if (!centrino_cpu[policy->cpu]) {
-                        dprintk("found unsupported CPU with "
-                        "Enhanced SpeedStep: send /proc/cpuinfo to "
-                        MAINTAINER "\n");
-                        return -ENODEV;
-                }
+        if (!centrino_cpu[policy->cpu]) {
+                dprintk("found unsupported CPU with "
+                "Enhanced SpeedStep: send /proc/cpuinfo to "
+                MAINTAINER "\n");
+                return -ENODEV;
+        }
 
-                if (centrino_cpu_init_table(policy)) {
-                        return -ENODEV;
-                }
+        if (centrino_cpu_init_table(policy)) {
+                return -ENODEV;
         }
 
         /* Check to see if Enhanced SpeedStep is enabled, and try to
@@ -634,20 +417,6 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
 
         cpufreq_frequency_table_put_attr(cpu);
 
-#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
-        if (!centrino_model[cpu]->model_name) {
-                static struct acpi_processor_performance *p;
-
-                if (acpi_perf_data[cpu]) {
-                        p = acpi_perf_data[cpu];
-                        dprintk("unregistering and freeing ACPI data\n");
-                        acpi_processor_unregister_performance(p, cpu);
-                        kfree(centrino_model[cpu]->op_points);
-                        kfree(centrino_model[cpu]);
-                }
-        }
-#endif
-
         centrino_model[cpu] = NULL;
 
         return 0;
@@ -849,25 +618,12 @@ static int __init centrino_init(void)
         if (!cpu_has(cpu, X86_FEATURE_EST))
                 return -ENODEV;
 
-        centrino_cpu_early_init_acpi();
-
         return cpufreq_register_driver(&centrino_driver);
 }
 
 static void __exit centrino_exit(void)
 {
-#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
-        unsigned int j;
-#endif
-        
         cpufreq_unregister_driver(&centrino_driver);
-
-#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
-        for_each_possible_cpu(j) {
-                kfree(acpi_perf_data[j]);
-                acpi_perf_data[j] = NULL;
-        }
-#endif
 }
 
 MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");