Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 357 insertions, 0 deletions

diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
new file mode 100644
index 000000000000..2b19372767eb
--- /dev/null
+++ b/arch/frv/Kconfig
@@ -0,0 +1,357 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+config FRV
+        bool
+        default y
+
+config UID16
+        bool
+        default y
+
+config RWSEM_GENERIC_SPINLOCK
+        bool
+        default y
+
+config RWSEM_XCHGADD_ALGORITHM
+        bool
+
+config GENERIC_FIND_NEXT_BIT
+        bool
+        default y
+
+config GENERIC_CALIBRATE_DELAY
+        bool
+        default n
+
+config GENERIC_HARDIRQS
+        bool
+        default n
+
+mainmenu "Fujitsu FR-V Kernel Configuration"
+
+source "init/Kconfig"
+
+
+menu "Fujitsu FR-V system setup"
+
+config MMU
+        bool "MMU support"
+        help
+          This options switches on and off support for the FR-V MMU
+          (effectively switching between vmlinux and uClinux). Not all FR-V
+          CPUs support this. Currently only the FR451 has a sufficiently
+          featured MMU.
+
+config FRV_OUTOFLINE_ATOMIC_OPS
+        bool "Out-of-line the FRV atomic operations"
+        default n
+        help
+          Setting this option causes the FR-V atomic operations to be mostly
+          implemented out-of-line.
+
+          See Documentation/fujitsu/frv/atomic-ops.txt for more information.
+
+config HIGHMEM
+        bool "High memory support"
+        depends on MMU
+        default y
+        help
+          If you wish to use more than 256MB of memory with your MMU based
+          system, you will need to select this option. The kernel can only see
+          the memory between 0xC0000000 and 0xD0000000 directly... everything
+          else must be kmapped.
+
+          The arch is, however, capable of supporting up to 3GB of SDRAM.
+
+config HIGHPTE
+        bool "Allocate page tables in highmem"
+        depends on HIGHMEM
+        default y
+        help
+          The VM uses one page of memory for each page table.  For systems
+          with a lot of RAM, this can be wasteful of precious low memory.
+          Setting this option will put user-space page tables in high memory.
+
+choice
+        prompt "uClinux kernel load address"
+        depends on !MMU
+        default UCPAGE_OFFSET_C0000000
+        help
+          This option sets the base address for the uClinux kernel. The kernel
+          will rearrange the SDRAM layout to start at this address, and move
+          itself to start there. It must be greater than 0, and it must be
+          sufficiently less than 0xE0000000 that the SDRAM does not intersect
+          the I/O region.
+
+          The base address must also be aligned such that the SDRAM controller
+          can decode it. For instance, a 512MB SDRAM bank must be 512MB aligned.
+
+config UCPAGE_OFFSET_20000000
+       bool "0x20000000"
+
+config UCPAGE_OFFSET_40000000
+       bool "0x40000000"
+
+config UCPAGE_OFFSET_60000000
+       bool "0x60000000"
+
+config UCPAGE_OFFSET_80000000
+       bool "0x80000000"
+
+config UCPAGE_OFFSET_A0000000
+       bool "0xA0000000"
+
+config UCPAGE_OFFSET_C0000000
+       bool "0xC0000000 (Recommended)"
+
+endchoice
+
+config PROTECT_KERNEL
+        bool "Protect core kernel against userspace"
+        depends on !MMU
+        default y
+        help
+          Selecting this option causes the uClinux kernel to change the
+          permittivity of DAMPR register covering the core kernel image to
+          prevent userspace accessing the underlying memory directly.
+
+choice
+        prompt "CPU Caching mode"
+        default FRV_DEFL_CACHE_WBACK
+        help
+          This option determines the default caching mode for the kernel.
+
+          Write-Back caching mode involves the all reads and writes causing
+          the affected cacheline to be read into the cache first before being
+          operated upon. Memory is not then updated by a write until the cache
+          is filled and a cacheline needs to be displaced from the cache to
+          make room. Only at that point is it written back.
+
+          Write-Behind caching is similar to Write-Back caching, except that a
+          write won't fetch a cacheline into the cache if there isn't already
+          one there; it will write directly to memory instead.
+
+          Write-Through caching only fetches cachelines from memory on a
+          read. Writes always get written directly to memory. If the affected
+          cacheline is also in cache, it will be updated too.
+
+          The final option is to turn of caching entirely.
+
+          Note that not all CPUs support Write-Behind caching. If the CPU on
+          which the kernel is running doesn't, it'll fall back to Write-Back
+          caching.
+
+config FRV_DEFL_CACHE_WBACK
+        bool "Write-Back"
+
+config FRV_DEFL_CACHE_WBEHIND
+        bool "Write-Behind"
+
+config FRV_DEFL_CACHE_WTHRU
+        bool "Write-Through"
+
+config FRV_DEFL_CACHE_DISABLED
+        bool "Disabled"
+
+endchoice
+
+menu "CPU core support"
+
+config CPU_FR401
+        bool "Include FR401 core support"
+        depends on !MMU
+        default y
+        help
+          This enables support for the FR401, FR401A and FR403 CPUs
+
+config CPU_FR405
+        bool "Include FR405 core support"
+        depends on !MMU
+        default y
+        help
+          This enables support for the FR405 CPU
+
+config CPU_FR451
+        bool "Include FR451 core support"
+        default y
+        help
+          This enables support for the FR451 CPU
+
+config CPU_FR451_COMPILE
+        bool "Specifically compile for FR451 core"
+        depends on CPU_FR451 && !CPU_FR401 && !CPU_FR405 && !CPU_FR551
+        default y
+        help
+          This causes appropriate flags to be passed to the compiler to
+          optimise for the FR451 CPU
+
+config CPU_FR551
+        bool "Include FR551 core support"
+        depends on !MMU
+        default y
+        help
+          This enables support for the FR555 CPU
+
+config CPU_FR551_COMPILE
+        bool "Specifically compile for FR551 core"
+        depends on CPU_FR551 && !CPU_FR401 && !CPU_FR405 && !CPU_FR451
+        default y
+        help
+          This causes appropriate flags to be passed to the compiler to
+          optimise for the FR555 CPU
+
+config FRV_L1_CACHE_SHIFT
+        int
+        default "5" if CPU_FR401 || CPU_FR405 || CPU_FR451
+        default "6" if CPU_FR551
+
+endmenu
+
+choice
+        prompt "System support"
+        default MB93091_VDK
+
+config MB93091_VDK
+        bool "MB93091 CPU board with or without motherboard"
+
+config MB93093_PDK
+        bool "MB93093 PDK unit"
+
+endchoice
+
+if MB93091_VDK
+choice
+        prompt "Motherboard support"
+        default MB93090_MB00
+
+config MB93090_MB00
+        bool "Use the MB93090-MB00 motherboard"
+        help
+          Select this option if the MB93091 CPU board is going to be used with
+          a MB93090-MB00 VDK motherboard
+
+config MB93091_NO_MB
+        bool "Use standalone"
+        help
+          Select this option if the MB93091 CPU board is going to be used
+          without a motherboard
+
+endchoice
+endif
+
+choice
+        prompt "GP-Relative data support"
+        default GPREL_DATA_8
+        help
+          This option controls what data, if any, should be placed in the GP
+          relative data sections. Using this means that the compiler can
+          generate accesses to the data using GR16-relative addressing which
+          is faster than absolute instructions and saves space (2 instructions
+          per access).
+
+          However, the GPREL region is limited in size because the immediate
+          value used in the load and store instructions is limited to a 12-bit
+          signed number.
+
+          So if the linker starts complaining that accesses to GPREL data are
+          out of range, try changing this option from the default.
+
+          Note that modules will always be compiled with this feature disabled
+          as the module data will not be in range of the GP base address.
+
+config GPREL_DATA_8
+        bool "Put data objects of up to 8 bytes into GP-REL"
+
+config GPREL_DATA_4
+        bool "Put data objects of up to 4 bytes into GP-REL"
+
+config GPREL_DATA_NONE
+        bool "Don't use GP-REL"
+
+endchoice
+
+config PCI
+        bool "Use PCI"
+        depends on MB93090_MB00
+        default y
+        help
+          Some FR-V systems (such as the MB93090-MB00 VDK) have PCI
+          onboard. If you have one of these boards and you wish to use the PCI
+          facilities, say Y here.
+
+          The PCI-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>, contains valuable
+          information about which PCI hardware does work under Linux and which
+          doesn't.
+
+config RESERVE_DMA_COHERENT
+        bool "Reserve DMA coherent memory"
+        depends on PCI && !MMU
+        default y
+        help
+          Many PCI drivers require access to uncached memory for DMA device
+          communications (such as is done with some Ethernet buffer rings). If
+          a fully featured MMU is available, this can be done through page
+          table settings, but if not, a region has to be set aside and marked
+          with a special DAMPR register.
+
+          Setting this option causes uClinux to set aside a portion of the
+          available memory for use in this manner. The memory will then be
+          unavailable for normal kernel use.
+
+source "drivers/pci/Kconfig"
+
+config PCMCIA
+        tristate "Use PCMCIA"
+        help
+          Say Y here if you want to attach PCMCIA- or PC-cards to your FR-V
+          board.  These are credit-card size devices such as network cards,
+          modems or hard drives often used with laptops computers.  There are
+          actually two varieties of these cards: the older 16 bit PCMCIA cards
+          and the newer 32 bit CardBus cards.  If you want to use CardBus
+          cards, you need to say Y here and also to "CardBus support" below.
+
+          To use your PC-cards, you will need supporting software from David
+          Hinds pcmcia-cs package (see the file <file:Documentation/Changes>
+          for location).  Please also read the PCMCIA-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.
+
+          To compile this driver as modules, choose M here: the
+          modules will be called pcmcia_core and ds.
+
+#config MATH_EMULATION
+#       bool "Math emulation support (EXPERIMENTAL)"
+#       depends on EXPERIMENTAL
+#       help
+#         At some point in the future, this will cause floating-point math
+#         instructions to be emulated by the kernel on machines that lack a
+#         floating-point math coprocessor.  Thrill-seekers and chronically
+#         sleep-deprived psychotic hacker types can say Y now, everyone else
+#         should probably wait a while.
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/frv/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"