aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf537
diff options
context:
space:
mode:
authorHarald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>2009-09-10 11:12:08 -0400
committerMike Frysinger <vapier@gentoo.org>2009-09-16 22:10:45 -0400
commit6058434468daa16580a77922661b31b880d60db5 (patch)
tree6daf8e52413782dd7b68510bb6f4bb0e41171e6f /arch/blackfin/mach-bf537
parent769cfc0d08e796c593b903ec393a2e90aae5f807 (diff)
Blackfin: cm-bf537u: split board from cm-bf537e
The cm-bf537u module, while similar to the cm-bf537e, is different enough to warrant its own resources. It has a USB controller but no PHY. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'arch/blackfin/mach-bf537')
-rw-r--r--arch/blackfin/mach-bf537/boards/Kconfig12
-rw-r--r--arch/blackfin/mach-bf537/boards/Makefile3
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537e.c727
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537u.c (renamed from arch/blackfin/mach-bf537/boards/cm_bf537.c)17
4 files changed, 747 insertions, 12 deletions
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 77c59da87e85..44132fda63be 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -9,11 +9,17 @@ config BFIN537_STAMP
9 help 9 help
10 BF537-STAMP board support. 10 BF537-STAMP board support.
11 11
12config BFIN537_BLUETECHNIX_CM 12config BFIN537_BLUETECHNIX_CM_E
13 bool "Bluetechnix CM-BF537" 13 bool "Bluetechnix CM-BF537E"
14 depends on (BF537) 14 depends on (BF537)
15 help 15 help
16 CM-BF537 support for EVAL- and DEV-Board. 16 CM-BF537E support for EVAL- and DEV-Board.
17
18config BFIN537_BLUETECHNIX_CM_U
19 bool "Bluetechnix CM-BF537U"
20 depends on (BF537)
21 help
22 CM-BF537U support for EVAL- and DEV-Board.
17 23
18config BFIN537_BLUETECHNIX_TCM 24config BFIN537_BLUETECHNIX_TCM
19 bool "Bluetechnix TCM-BF537" 25 bool "Bluetechnix TCM-BF537"
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 68b98a7af6a6..7e6aa4e5b205 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,8 @@
3# 3#
4 4
5obj-$(CONFIG_BFIN537_STAMP) += stamp.o 5obj-$(CONFIG_BFIN537_STAMP) += stamp.o
6obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o 6obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_E) += cm_bf537e.o
7obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_U) += cm_bf537u.o
7obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o 8obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o
8obj-$(CONFIG_PNAV10) += pnav10.o 9obj-$(CONFIG_PNAV10) += pnav10.o
9obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o 10obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
new file mode 100644
index 000000000000..87acb7dd2df3
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -0,0 +1,727 @@
1/*
2 * File: arch/blackfin/mach-bf537/boards/cm_bf537.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
5 *
6 * Created: 2005
7 * Description: Board description file
8 *
9 * Modified:
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc.
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 */
30
31#include <linux/device.h>
32#include <linux/etherdevice.h>
33#include <linux/platform_device.h>
34#include <linux/mtd/mtd.h>
35#include <linux/mtd/partitions.h>
36#include <linux/mtd/physmap.h>
37#include <linux/spi/spi.h>
38#include <linux/spi/flash.h>
39#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
40#include <linux/usb/isp1362.h>
41#endif
42#include <linux/ata_platform.h>
43#include <linux/irq.h>
44#include <asm/dma.h>
45#include <asm/bfin5xx_spi.h>
46#include <asm/portmux.h>
47#include <asm/dpmc.h>
48
49/*
50 * Name the Board for the /proc/cpuinfo
51 */
52const char bfin_board_name[] = "Bluetechnix CM BF537E";
53
54#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
55/* all SPI peripherals info goes here */
56
57#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
58static struct mtd_partition bfin_spi_flash_partitions[] = {
59 {
60 .name = "bootloader(spi)",
61 .size = 0x00020000,
62 .offset = 0,
63 .mask_flags = MTD_CAP_ROM
64 }, {
65 .name = "linux kernel(spi)",
66 .size = 0xe0000,
67 .offset = 0x20000
68 }, {
69 .name = "file system(spi)",
70 .size = 0x700000,
71 .offset = 0x00100000,
72 }
73};
74
75static struct flash_platform_data bfin_spi_flash_data = {
76 .name = "m25p80",
77 .parts = bfin_spi_flash_partitions,
78 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
79 .type = "m25p64",
80};
81
82/* SPI flash chip (m25p64) */
83static struct bfin5xx_spi_chip spi_flash_chip_info = {
84 .enable_dma = 0, /* use dma transfer with this chip*/
85 .bits_per_word = 8,
86};
87#endif
88
89#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
90/* SPI ADC chip */
91static struct bfin5xx_spi_chip spi_adc_chip_info = {
92 .enable_dma = 1, /* use dma transfer with this chip*/
93 .bits_per_word = 16,
94};
95#endif
96
97#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
98static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
99 .enable_dma = 0,
100 .bits_per_word = 16,
101};
102#endif
103
104#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
105static struct bfin5xx_spi_chip mmc_spi_chip_info = {
106 .enable_dma = 0,
107 .bits_per_word = 8,
108};
109#endif
110
111static struct spi_board_info bfin_spi_board_info[] __initdata = {
112#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
113 {
114 /* the modalias must be the same as spi device driver name */
115 .modalias = "m25p80", /* Name of spi_driver for this device */
116 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
117 .bus_num = 0, /* Framework bus number */
118 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
119 .platform_data = &bfin_spi_flash_data,
120 .controller_data = &spi_flash_chip_info,
121 .mode = SPI_MODE_3,
122 },
123#endif
124
125#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
126 {
127 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
128 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
129 .bus_num = 0, /* Framework bus number */
130 .chip_select = 1, /* Framework chip select. */
131 .platform_data = NULL, /* No spi_driver specific config */
132 .controller_data = &spi_adc_chip_info,
133 },
134#endif
135
136#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
137 {
138 .modalias = "ad1836",
139 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
140 .bus_num = 0,
141 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
142 .controller_data = &ad1836_spi_chip_info,
143 },
144#endif
145
146#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
147 {
148 .modalias = "mmc_spi",
149 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
150 .bus_num = 0,
151 .chip_select = 1,
152 .controller_data = &mmc_spi_chip_info,
153 .mode = SPI_MODE_3,
154 },
155#endif
156};
157
158/* SPI (0) */
159static struct resource bfin_spi0_resource[] = {
160 [0] = {
161 .start = SPI0_REGBASE,
162 .end = SPI0_REGBASE + 0xFF,
163 .flags = IORESOURCE_MEM,
164 },
165 [1] = {
166 .start = CH_SPI,
167 .end = CH_SPI,
168 .flags = IORESOURCE_DMA,
169 },
170 [2] = {
171 .start = IRQ_SPI,
172 .end = IRQ_SPI,
173 .flags = IORESOURCE_IRQ,
174 },
175};
176
177/* SPI controller data */
178static struct bfin5xx_spi_master bfin_spi0_info = {
179 .num_chipselect = 8,
180 .enable_dma = 1, /* master has the ability to do dma transfer */
181 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
182};
183
184static struct platform_device bfin_spi0_device = {
185 .name = "bfin-spi",
186 .id = 0, /* Bus number */
187 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
188 .resource = bfin_spi0_resource,
189 .dev = {
190 .platform_data = &bfin_spi0_info, /* Passed to driver */
191 },
192};
193#endif /* spi master and devices */
194
195#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
196static struct platform_device rtc_device = {
197 .name = "rtc-bfin",
198 .id = -1,
199};
200#endif
201
202#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
203static struct platform_device hitachi_fb_device = {
204 .name = "hitachi-tx09",
205};
206#endif
207
208#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
209#include <linux/smc91x.h>
210
211static struct smc91x_platdata smc91x_info = {
212 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
213 .leda = RPC_LED_100_10,
214 .ledb = RPC_LED_TX_RX,
215};
216
217static struct resource smc91x_resources[] = {
218 {
219 .start = 0x20200300,
220 .end = 0x20200300 + 16,
221 .flags = IORESOURCE_MEM,
222 }, {
223 .start = IRQ_PF14,
224 .end = IRQ_PF14,
225 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
226 },
227};
228
229static struct platform_device smc91x_device = {
230 .name = "smc91x",
231 .id = 0,
232 .num_resources = ARRAY_SIZE(smc91x_resources),
233 .resource = smc91x_resources,
234 .dev = {
235 .platform_data = &smc91x_info,
236 },
237};
238#endif
239
240#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
241static struct resource isp1362_hcd_resources[] = {
242 {
243 .start = 0x20308000,
244 .end = 0x20308000,
245 .flags = IORESOURCE_MEM,
246 }, {
247 .start = 0x20308004,
248 .end = 0x20308004,
249 .flags = IORESOURCE_MEM,
250 }, {
251 .start = IRQ_PG15,
252 .end = IRQ_PG15,
253 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
254 },
255};
256
257static struct isp1362_platform_data isp1362_priv = {
258 .sel15Kres = 1,
259 .clknotstop = 0,
260 .oc_enable = 0,
261 .int_act_high = 0,
262 .int_edge_triggered = 0,
263 .remote_wakeup_connected = 0,
264 .no_power_switching = 1,
265 .power_switching_mode = 0,
266};
267
268static struct platform_device isp1362_hcd_device = {
269 .name = "isp1362-hcd",
270 .id = 0,
271 .dev = {
272 .platform_data = &isp1362_priv,
273 },
274 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
275 .resource = isp1362_hcd_resources,
276};
277#endif
278
279#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
280static struct resource net2272_bfin_resources[] = {
281 {
282 .start = 0x20300000,
283 .end = 0x20300000 + 0x100,
284 .flags = IORESOURCE_MEM,
285 }, {
286 .start = IRQ_PG13,
287 .end = IRQ_PG13,
288 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
289 },
290};
291
292static struct platform_device net2272_bfin_device = {
293 .name = "net2272",
294 .id = -1,
295 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
296 .resource = net2272_bfin_resources,
297};
298#endif
299
300static struct resource bfin_gpios_resources = {
301 .start = 0,
302 .end = MAX_BLACKFIN_GPIOS - 1,
303 .flags = IORESOURCE_IRQ,
304};
305
306static struct platform_device bfin_gpios_device = {
307 .name = "simple-gpio",
308 .id = -1,
309 .num_resources = 1,
310 .resource = &bfin_gpios_resources,
311};
312
313#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
314static struct mtd_partition cm_partitions[] = {
315 {
316 .name = "bootloader(nor)",
317 .size = 0x40000,
318 .offset = 0,
319 }, {
320 .name = "linux kernel(nor)",
321 .size = 0x100000,
322 .offset = MTDPART_OFS_APPEND,
323 }, {
324 .name = "file system(nor)",
325 .size = MTDPART_SIZ_FULL,
326 .offset = MTDPART_OFS_APPEND,
327 }
328};
329
330static struct physmap_flash_data cm_flash_data = {
331 .width = 2,
332 .parts = cm_partitions,
333 .nr_parts = ARRAY_SIZE(cm_partitions),
334};
335
336static unsigned cm_flash_gpios[] = { GPIO_PF4 };
337
338static struct resource cm_flash_resource[] = {
339 {
340 .name = "cfi_probe",
341 .start = 0x20000000,
342 .end = 0x201fffff,
343 .flags = IORESOURCE_MEM,
344 }, {
345 .start = (unsigned long)cm_flash_gpios,
346 .end = ARRAY_SIZE(cm_flash_gpios),
347 .flags = IORESOURCE_IRQ,
348 }
349};
350
351static struct platform_device cm_flash_device = {
352 .name = "gpio-addr-flash",
353 .id = 0,
354 .dev = {
355 .platform_data = &cm_flash_data,
356 },
357 .num_resources = ARRAY_SIZE(cm_flash_resource),
358 .resource = cm_flash_resource,
359};
360#endif
361
362#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
363#ifdef CONFIG_SERIAL_BFIN_UART0
364static struct resource bfin_uart0_resources[] = {
365 {
366 .start = 0xFFC00400,
367 .end = 0xFFC004FF,
368 .flags = IORESOURCE_MEM,
369 },
370 {
371 .start = IRQ_UART0_RX,
372 .end = IRQ_UART0_RX+1,
373 .flags = IORESOURCE_IRQ,
374 },
375 {
376 .start = IRQ_UART0_ERROR,
377 .end = IRQ_UART0_ERROR,
378 .flags = IORESOURCE_IRQ,
379 },
380 {
381 .start = CH_UART0_TX,
382 .end = CH_UART0_TX,
383 .flags = IORESOURCE_DMA,
384 },
385 {
386 .start = CH_UART0_RX,
387 .end = CH_UART0_RX,
388 .flags = IORESOURCE_DMA,
389 },
390#ifdef CONFIG_BFIN_UART0_CTSRTS
391 {
392 /*
393 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
394 */
395 .start = -1,
396 .end = -1,
397 .flags = IORESOURCE_IO,
398 },
399 {
400 /*
401 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
402 */
403 .start = -1,
404 .end = -1,
405 .flags = IORESOURCE_IO,
406 },
407#endif
408};
409
410static struct platform_device bfin_uart0_device = {
411 .name = "bfin-uart",
412 .id = 0,
413 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
414 .resource = bfin_uart0_resources,
415};
416#endif
417#ifdef CONFIG_SERIAL_BFIN_UART1
418static struct resource bfin_uart1_resources[] = {
419 {
420 .start = 0xFFC02000,
421 .end = 0xFFC020FF,
422 .flags = IORESOURCE_MEM,
423 },
424 {
425 .start = IRQ_UART1_RX,
426 .end = IRQ_UART1_RX+1,
427 .flags = IORESOURCE_IRQ,
428 },
429 {
430 .start = IRQ_UART1_ERROR,
431 .end = IRQ_UART1_ERROR,
432 .flags = IORESOURCE_IRQ,
433 },
434 {
435 .start = CH_UART1_TX,
436 .end = CH_UART1_TX,
437 .flags = IORESOURCE_DMA,
438 },
439 {
440 .start = CH_UART1_RX,
441 .end = CH_UART1_RX,
442 .flags = IORESOURCE_DMA,
443 },
444#ifdef CONFIG_BFIN_UART1_CTSRTS
445 {
446 /*
447 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
448 */
449 .start = -1,
450 .end = -1,
451 .flags = IORESOURCE_IO,
452 },
453 {
454 /*
455 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
456 */
457 .start = -1,
458 .end = -1,
459 .flags = IORESOURCE_IO,
460 },
461#endif
462};
463
464static struct platform_device bfin_uart1_device = {
465 .name = "bfin-uart",
466 .id = 1,
467 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
468 .resource = bfin_uart1_resources,
469};
470#endif
471#endif
472
473#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
474#ifdef CONFIG_BFIN_SIR0
475static struct resource bfin_sir0_resources[] = {
476 {
477 .start = 0xFFC00400,
478 .end = 0xFFC004FF,
479 .flags = IORESOURCE_MEM,
480 },
481 {
482 .start = IRQ_UART0_RX,
483 .end = IRQ_UART0_RX+1,
484 .flags = IORESOURCE_IRQ,
485 },
486 {
487 .start = CH_UART0_RX,
488 .end = CH_UART0_RX+1,
489 .flags = IORESOURCE_DMA,
490 },
491};
492static struct platform_device bfin_sir0_device = {
493 .name = "bfin_sir",
494 .id = 0,
495 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
496 .resource = bfin_sir0_resources,
497};
498#endif
499#ifdef CONFIG_BFIN_SIR1
500static struct resource bfin_sir1_resources[] = {
501 {
502 .start = 0xFFC02000,
503 .end = 0xFFC020FF,
504 .flags = IORESOURCE_MEM,
505 },
506 {
507 .start = IRQ_UART1_RX,
508 .end = IRQ_UART1_RX+1,
509 .flags = IORESOURCE_IRQ,
510 },
511 {
512 .start = CH_UART1_RX,
513 .end = CH_UART1_RX+1,
514 .flags = IORESOURCE_DMA,
515 },
516};
517static struct platform_device bfin_sir1_device = {
518 .name = "bfin_sir",
519 .id = 1,
520 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
521 .resource = bfin_sir1_resources,
522};
523#endif
524#endif
525
526#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
527static struct resource bfin_twi0_resource[] = {
528 [0] = {
529 .start = TWI0_REGBASE,
530 .end = TWI0_REGBASE,
531 .flags = IORESOURCE_MEM,
532 },
533 [1] = {
534 .start = IRQ_TWI,
535 .end = IRQ_TWI,
536 .flags = IORESOURCE_IRQ,
537 },
538};
539
540static struct platform_device i2c_bfin_twi_device = {
541 .name = "i2c-bfin-twi",
542 .id = 0,
543 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
544 .resource = bfin_twi0_resource,
545};
546#endif
547
548#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
549static struct platform_device bfin_sport0_uart_device = {
550 .name = "bfin-sport-uart",
551 .id = 0,
552};
553
554static struct platform_device bfin_sport1_uart_device = {
555 .name = "bfin-sport-uart",
556 .id = 1,
557};
558#endif
559
560#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
561static struct platform_device bfin_mii_bus = {
562 .name = "bfin_mii_bus",
563};
564
565static struct platform_device bfin_mac_device = {
566 .name = "bfin_mac",
567 .dev.platform_data = &bfin_mii_bus,
568};
569#endif
570
571#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
572#define PATA_INT IRQ_PF14
573
574static struct pata_platform_info bfin_pata_platform_data = {
575 .ioport_shift = 2,
576 .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
577};
578
579static struct resource bfin_pata_resources[] = {
580 {
581 .start = 0x2030C000,
582 .end = 0x2030C01F,
583 .flags = IORESOURCE_MEM,
584 },
585 {
586 .start = 0x2030D018,
587 .end = 0x2030D01B,
588 .flags = IORESOURCE_MEM,
589 },
590 {
591 .start = PATA_INT,
592 .end = PATA_INT,
593 .flags = IORESOURCE_IRQ,
594 },
595};
596
597static struct platform_device bfin_pata_device = {
598 .name = "pata_platform",
599 .id = -1,
600 .num_resources = ARRAY_SIZE(bfin_pata_resources),
601 .resource = bfin_pata_resources,
602 .dev = {
603 .platform_data = &bfin_pata_platform_data,
604 }
605};
606#endif
607
608static const unsigned int cclk_vlev_datasheet[] =
609{
610 VRPAIR(VLEV_085, 250000000),
611 VRPAIR(VLEV_090, 376000000),
612 VRPAIR(VLEV_095, 426000000),
613 VRPAIR(VLEV_100, 426000000),
614 VRPAIR(VLEV_105, 476000000),
615 VRPAIR(VLEV_110, 476000000),
616 VRPAIR(VLEV_115, 476000000),
617 VRPAIR(VLEV_120, 500000000),
618 VRPAIR(VLEV_125, 533000000),
619 VRPAIR(VLEV_130, 600000000),
620};
621
622static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
623 .tuple_tab = cclk_vlev_datasheet,
624 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
625 .vr_settling_time = 25 /* us */,
626};
627
628static struct platform_device bfin_dpmc = {
629 .name = "bfin dpmc",
630 .dev = {
631 .platform_data = &bfin_dmpc_vreg_data,
632 },
633};
634
635static struct platform_device *cm_bf537e_devices[] __initdata = {
636
637 &bfin_dpmc,
638
639#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
640 &hitachi_fb_device,
641#endif
642
643#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
644 &rtc_device,
645#endif
646
647#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
648#ifdef CONFIG_SERIAL_BFIN_UART0
649 &bfin_uart0_device,
650#endif
651#ifdef CONFIG_SERIAL_BFIN_UART1
652 &bfin_uart1_device,
653#endif
654#endif
655
656#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
657#ifdef CONFIG_BFIN_SIR0
658 &bfin_sir0_device,
659#endif
660#ifdef CONFIG_BFIN_SIR1
661 &bfin_sir1_device,
662#endif
663#endif
664
665#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
666 &i2c_bfin_twi_device,
667#endif
668
669#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
670 &bfin_sport0_uart_device,
671 &bfin_sport1_uart_device,
672#endif
673
674#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
675 &isp1362_hcd_device,
676#endif
677
678#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
679 &smc91x_device,
680#endif
681
682#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
683 &bfin_mii_bus,
684 &bfin_mac_device,
685#endif
686
687#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
688 &net2272_bfin_device,
689#endif
690
691#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
692 &bfin_spi0_device,
693#endif
694
695#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
696 &bfin_pata_device,
697#endif
698
699#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
700 &cm_flash_device,
701#endif
702
703 &bfin_gpios_device,
704};
705
706static int __init cm_bf537e_init(void)
707{
708 printk(KERN_INFO "%s(): registering device resources\n", __func__);
709 platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
710#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
711 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
712#endif
713
714#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
715 irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
716#endif
717 return 0;
718}
719
720arch_initcall(cm_bf537e_init);
721
722void bfin_get_ether_addr(char *addr)
723{
724 random_ether_addr(addr);
725 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
726}
727EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index 220cfda60f04..8219dc3d65bd 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -1,5 +1,5 @@
1/* 1/*
2 * File: arch/blackfin/mach-bf537/boards/cm_bf537.c 2 * File: arch/blackfin/mach-bf537/boards/cm_bf537u.c
3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c 3 * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au> 4 * Author: Aidan Williams <aidan@nicta.com.au>
5 * 5 *
@@ -45,11 +45,12 @@
45#include <asm/bfin5xx_spi.h> 45#include <asm/bfin5xx_spi.h>
46#include <asm/portmux.h> 46#include <asm/portmux.h>
47#include <asm/dpmc.h> 47#include <asm/dpmc.h>
48#include <linux/spi/mmc_spi.h>
48 49
49/* 50/*
50 * Name the Board for the /proc/cpuinfo 51 * Name the Board for the /proc/cpuinfo
51 */ 52 */
52const char bfin_board_name[] = "Bluetechnix CM BF537"; 53const char bfin_board_name[] = "Bluetechnix CM BF537U";
53 54
54#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 55#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
55/* all SPI peripherals info goes here */ 56/* all SPI peripherals info goes here */
@@ -318,7 +319,7 @@ static struct mtd_partition cm_partitions[] = {
318 .offset = 0, 319 .offset = 0,
319 }, { 320 }, {
320 .name = "linux kernel(nor)", 321 .name = "linux kernel(nor)",
321 .size = 0xE0000, 322 .size = 0x100000,
322 .offset = MTDPART_OFS_APPEND, 323 .offset = MTDPART_OFS_APPEND,
323 }, { 324 }, {
324 .name = "file system(nor)", 325 .name = "file system(nor)",
@@ -333,7 +334,7 @@ static struct physmap_flash_data cm_flash_data = {
333 .nr_parts = ARRAY_SIZE(cm_partitions), 334 .nr_parts = ARRAY_SIZE(cm_partitions),
334}; 335};
335 336
336static unsigned cm_flash_gpios[] = { GPIO_PF4 }; 337static unsigned cm_flash_gpios[] = { GPIO_PH0 };
337 338
338static struct resource cm_flash_resource[] = { 339static struct resource cm_flash_resource[] = {
339 { 340 {
@@ -542,7 +543,7 @@ static struct platform_device bfin_dpmc = {
542 }, 543 },
543}; 544};
544 545
545static struct platform_device *cm_bf537_devices[] __initdata = { 546static struct platform_device *cm_bf537u_devices[] __initdata = {
546 547
547 &bfin_dpmc, 548 &bfin_dpmc,
548 549
@@ -608,10 +609,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
608 &bfin_gpios_device, 609 &bfin_gpios_device,
609}; 610};
610 611
611static int __init cm_bf537_init(void) 612static int __init cm_bf537u_init(void)
612{ 613{
613 printk(KERN_INFO "%s(): registering device resources\n", __func__); 614 printk(KERN_INFO "%s(): registering device resources\n", __func__);
614 platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); 615 platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
615#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) 616#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
616 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); 617 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
617#endif 618#endif
@@ -622,7 +623,7 @@ static int __init cm_bf537_init(void)
622 return 0; 623 return 0;
623} 624}
624 625
625arch_initcall(cm_bf537_init); 626arch_initcall(cm_bf537u_init);
626 627
627void bfin_get_ether_addr(char *addr) 628void bfin_get_ether_addr(char *addr)
628{ 629{
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-25 04:41:06 -0400