ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx

On Beagle xM Rev. Ax/Bx, the USB power enable GPIO logic is
reversed when compared to other revisions i.e. it is
active high instead of active low.

Use the beagle_config.usb_pwr_level flag correctly so that
the power regulator can be configured at runtime.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 3 insertions, 3 deletions

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6de78605c0af..04c116555412 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -112,13 +112,13 @@ static u8 omap3_beagle_version;
  */
 static struct {
         int mmc1_gpio_wp;
-        int usb_pwr_level;
+        bool usb_pwr_level;     /* 0 - Active Low, 1 - Active High */
         int dvi_pd_gpio;
         int usr_button_gpio;
         int mmc_caps;
 } beagle_config = {
         .mmc1_gpio_wp = -EINVAL,
-        .usb_pwr_level = GPIOF_OUT_INIT_LOW,
+        .usb_pwr_level = 0,
         .dvi_pd_gpio = -EINVAL,
         .usr_button_gpio = 4,
         .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
@@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void)
         case 0:
                 printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
                 omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
-                beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+                beagle_config.usb_pwr_level = 1;
                 beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
                 break;
         case 2: