Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits)
  USB: mos7840: add device IDs for B&B electronics devices
  USB: ftdi_sio: add USB device ID's for B&B Electronics line
  USB: musb: musb_host: fix sparse warning
  USB: musb: musb_gadget: fix sparse warning
  USB: musb: omap2430: fix sparse warning
  USB: core: message: fix sparse warning
  USB: core: hub: fix sparse warning
  USB: core: fix sparse warning for static function
  USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
  USB: Check bandwidth when switching alt settings.
  USB: Refactor code to find alternate interface settings.
  USB: xhci: Fix command completion after a drop endpoint.
  USB: xhci: Make reverting an alt setting "unfailable".
  USB: usbtmc: Use usb_clear_halt() instead of custom code.
  USB: xhci: Add correct email and files to MAINTAINERS entry.
  USB: ehci-omap.c: introduce missing kfree
  USB: xhci-mem.c: introduce missing kfree
  USB: add remove_id sysfs attr for usb drivers
  USB: g_multi kconfig: fix depends and help text
  USB: option: add pid for ZTE
  ...

3 files changed, 130 insertions, 0 deletions

diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 4cbca9da1505..996cbac6932c 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
+obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
new file mode 100644
index 000000000000..41599be882e8
--- /dev/null
+++ b/arch/arm/plat-mxc/ehci.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET  0x600
+
+#define MX31_OTG_SIC_SHIFT      29
+#define MX31_OTG_SIC_MASK       (0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT         (1 << 24)
+
+#define MX31_H2_SIC_SHIFT       21
+#define MX31_H2_SIC_MASK        (0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT          (1 << 16)
+#define MX31_H2_DT_BIT          (1 << 5)
+
+#define MX31_H1_SIC_SHIFT       13
+#define MX31_H1_SIC_MASK        (0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT          (1 << 8)
+#define MX31_H1_DT_BIT          (1 << 4)
+
+int mxc_set_usbcontrol(int port, unsigned int flags)
+{
+        unsigned int v;
+
+        if (cpu_is_mx31()) {
+                v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+                                     USBCTRL_OTGBASE_OFFSET));
+
+                switch (port) {
+                case 0: /* OTG port */
+                        v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                        << MX31_OTG_SIC_SHIFT;
+                        if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+                                v |= MX31_OTG_PM_BIT;
+
+                        break;
+                case 1: /* H1 port */
+                        v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                                << MX31_H1_SIC_SHIFT;
+                        if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+                                v |= MX31_H1_PM_BIT;
+
+                        if (!(flags & MXC_EHCI_TTL_ENABLED))
+                                v |= MX31_H1_DT_BIT;
+
+                        break;
+                case 2: /* H2 port */
+                        v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                                << MX31_H2_SIC_SHIFT;
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+                                v |= MX31_H2_PM_BIT;
+
+                        if (!(flags & MXC_EHCI_TTL_ENABLED))
+                                v |= MX31_H2_DT_BIT;
+
+                        break;
+                }
+
+                writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+                                     USBCTRL_OTGBASE_OFFSET));
+                return 0;
+        }
+
+        printk(KERN_WARNING
+                "%s() unable to setup USBCONTROL for this CPU\n", __func__);
+        return -EINVAL;
+}
+EXPORT_SYMBOL(mxc_set_usbcontrol);
+
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
new file mode 100644
index 000000000000..8f796239393e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -0,0 +1,37 @@
+#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
+#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND  (1 << 23)
+#define MXC_EHCI_FORCE_FS               (1 << 24)
+#define MXC_EHCI_UTMI_8BIT              (0 << 28)
+#define MXC_EHCI_UTMI_16BIT             (1 << 28)
+#define MXC_EHCI_SERIAL                 (1 << 29)
+#define MXC_EHCI_MODE_UTMI              (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS           (1 << 30)
+#define MXC_EHCI_MODE_ULPI              (2 << 30)
+#define MXC_EHCI_MODE_SERIAL            (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI     (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI      (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI   (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI    (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK         (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED     (1 << 5)
+#define MXC_EHCI_TTL_ENABLED            (1 << 6)
+
+struct mxc_usbh_platform_data {
+        int (*init)(struct platform_device *pdev);
+        int (*exit)(struct platform_device *pdev);
+
+        unsigned int             portsc;
+        unsigned int             flags;
+        struct otg_transceiver  *otg;
+};
+
+int mxc_set_usbcontrol(int port, unsigned int flags);
+
+#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
+