[ARM] pxa: add basic support for Voipac PXA270 SBC

This patch adds basic support for the Voipac PXA270 SBC.
The device consists of the following hardware:
- PXA270 @ 520 MHz
- 256MB RAM (sparsemem, 2*128MB regions)
- 64MB NOR flash
- 640x480 LCD
- Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

4 files changed, 338 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 2e4122de6081..e4a0452e0e2d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -249,6 +249,12 @@ config MACH_COLIBRI320
         select PXA3xx
         select CPU_PXA320
 
+config MACH_VPAC270
+        bool "Voipac PXA270"
+        select PXA27x
+        help
+          PXA270 based Single Board Computer.
+
 comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index e929231f6a97..b8f1f4bc7ca7 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)      += colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)   += colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)   += colibri-pxa3xx.o colibri-pxa320.o
+obj-$(CONFIG_MACH_VPAC270)      += vpac270.o
 
 # End-user Products
 obj-$(CONFIG_MACH_H4700)        += hx4700.o
diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h
new file mode 100644
index 000000000000..8f8eaed101dc
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vpac270.h
@@ -0,0 +1,26 @@
+/*
+ * GPIOs and interrupts for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_VPAC270_H_
+#define _INCLUDE_VPAC270_H_
+
+#define GPIO1_VPAC270_USER_BTN          1
+
+#define GPIO15_VPAC270_LED_ORANGE       15
+
+#define GPIO81_VPAC270_BKL_ON           81
+#define GPIO83_VPAC270_NL_ON            83
+
+#define GPIO52_VPAC270_SD_READONLY      52
+#define GPIO53_VPAC270_SD_DETECT_N      53
+
+#endif
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
new file mode 100644
index 000000000000..710a17c80a14
--- /dev/null
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -0,0 +1,305 @@
+/*
+ * Hardware definitions for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/vpac270.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long vpac270_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        GPIO112_MMC_CMD,
+        GPIO53_GPIO,    /* SD detect */
+        GPIO52_GPIO,    /* SD r/o switch */
+
+        /* GPIO KEYS */
+        GPIO1_GPIO,     /* USER BTN */
+
+        /* LEDs */
+        GPIO15_GPIO,    /* orange led */
+
+        /* FFUART */
+        GPIO34_FFUART_RXD,
+        GPIO39_FFUART_TXD,
+        GPIO27_FFUART_RTS,
+        GPIO100_FFUART_CTS,
+        GPIO33_FFUART_DSR,
+        GPIO40_FFUART_DTR,
+        GPIO10_FFUART_DCD,
+        GPIO38_FFUART_RI,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO86_LCD_LDD_16,
+        GPIO87_LCD_LDD_17,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition vpac270_partitions[] = {
+        {
+                .name           = "Flash",
+                .offset         = 0x00000000,
+                .size           = MTDPART_SIZ_FULL,
+        }
+};
+
+static struct physmap_flash_data vpac270_flash_data[] = {
+        {
+                .width          = 2,    /* bankwidth in bytes */
+                .parts          = vpac270_partitions,
+                .nr_parts       = ARRAY_SIZE(vpac270_partitions)
+        }
+};
+
+static struct resource vpac270_flash_resource = {
+        .start  = PXA_CS0_PHYS,
+        .end    = PXA_CS0_PHYS + SZ_64M - 1,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device vpac270_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .resource       = &vpac270_flash_resource,
+        .num_resources  = 1,
+        .dev            = {
+                .platform_data = vpac270_flash_data,
+        },
+};
+static void __init vpac270_nor_init(void)
+{
+        platform_device_register(&vpac270_flash);
+}
+#else
+static inline void vpac270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data vpac270_mci_platform_data = {
+        .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .gpio_card_detect       = GPIO53_VPAC270_SD_DETECT_N,
+        .gpio_card_ro           = GPIO52_VPAC270_SD_READONLY,
+        .detect_delay           = 20,
+};
+
+static void __init vpac270_mmc_init(void)
+{
+        pxa_set_mci_info(&vpac270_mci_platform_data);
+}
+#else
+static inline void vpac270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button vpac270_pxa_buttons[] = {
+        {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
+};
+
+static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
+        .buttons        = vpac270_pxa_buttons,
+        .nbuttons       = ARRAY_SIZE(vpac270_pxa_buttons),
+};
+
+static struct platform_device vpac270_pxa_keys = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &vpac270_pxa_keys_data,
+        },
+};
+
+static void __init vpac270_keys_init(void)
+{
+        platform_device_register(&vpac270_pxa_keys);
+}
+#else
+static inline void vpac270_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led vpac270_gpio_leds[] = {
+{
+        .name                   = "vpac270:orange:user",
+        .default_trigger        = "none",
+        .gpio                   = GPIO15_VPAC270_LED_ORANGE,
+        .active_low             = 1,
+}
+};
+
+static struct gpio_led_platform_data vpac270_gpio_led_info = {
+        .leds           = vpac270_gpio_leds,
+        .num_leds       = ARRAY_SIZE(vpac270_gpio_leds),
+};
+
+static struct platform_device vpac270_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &vpac270_gpio_led_info,
+        }
+};
+
+static void __init vpac270_leds_init(void)
+{
+        platform_device_register(&vpac270_leds);
+}
+#else
+static inline void vpac270_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info vpac270_lcd_modes[] = {
+{
+        .pixclock       = 57692,
+        .xres           = 640,
+        .yres           = 480,
+        .bpp            = 32,
+        .depth          = 18,
+
+        .left_margin    = 144,
+        .right_margin   = 32,
+        .upper_margin   = 13,
+        .lower_margin   = 30,
+
+        .hsync_len      = 32,
+        .vsync_len      = 2,
+
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info vpac270_lcd_screen = {
+        .modes          = vpac270_lcd_modes,
+        .num_modes      = ARRAY_SIZE(vpac270_lcd_modes),
+        .lcd_conn       = LCD_COLOR_TFT_18BPP,
+};
+
+static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+        gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
+}
+
+static void __init vpac270_lcd_init(void)
+{
+        int ret;
+
+        ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
+        if (ret) {
+                pr_err("Requesting BKL-ON GPIO failed!\n");
+                goto err;
+        }
+
+        ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
+        if (ret) {
+                pr_err("Setting BKL-ON GPIO direction failed!\n");
+                goto err2;
+        }
+
+        vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
+        set_pxa_fb_info(&vpac270_lcd_screen);
+        return;
+
+err2:
+        gpio_free(GPIO81_VPAC270_BKL_ON);
+err:
+        return;
+}
+#else
+static inline void vpac270_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init vpac270_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
+
+        pxa_set_ffuart_info(NULL);
+        pxa_set_btuart_info(NULL);
+        pxa_set_stuart_info(NULL);
+
+        vpac270_lcd_init();
+        vpac270_mmc_init();
+        vpac270_nor_init();
+        vpac270_leds_init();
+        vpac270_keys_init();
+}
+
+MACHINE_START(VPAC270, "Voipac PXA270")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = vpac270_init
+MACHINE_END