Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/wireless/iwlwifi/pcie/tx.c

Minor iwlwifi conflict in TX queue disabling between 'net', which
removed a bogus warning, and 'net-next' which added some status
register poking code.

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 52 insertions, 16 deletions

diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index cd0c8b1e1ecf..14e9947bad6e 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
                 break;
         case VPBE_ENC_CUSTOM_TIMINGS:
                 if (pclock <= 27000000) {
-                        v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-                             DM644X_VPSS_DACCLKEN;
+                        v |= DM644X_VPSS_DACCLKEN;
                         writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
                 } else {
                         /*
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 21d568b3b149..87e07d6fc615 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
                 exynos_pdma1_pdata.nr_valid_peri =
                         ARRAY_SIZE(exynos4210_pdma1_peri);
                 exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+                if (samsung_rev() == EXYNOS4210_REV_0)
+                        exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
         } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
                 exynos_pdma0_pdata.nr_valid_peri =
                         ARRAY_SIZE(exynos4212_pdma0_peri);
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 8480849affb9..ed4da4544cd2 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -90,6 +90,7 @@
 
 #define EXYNOS4_PA_MDMA0                0x10810000
 #define EXYNOS4_PA_MDMA1                0x12850000
+#define EXYNOS4_PA_S_MDMA1              0x12840000
 #define EXYNOS4_PA_PDMA0                0x12680000
 #define EXYNOS4_PA_PDMA1                0x12690000
 #define EXYNOS5_PA_MDMA0                0x10800000
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41dfbfa..378590694447 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void)
         } else
                 return;
 
+        /* Make sure that the GPIO pins are muxed correctly */
+        omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
         err = gpio_request_array(igep_wlan_bt_gpios,
                                  ARRAY_SIZE(igep_wlan_bt_gpios));
         if (err) {
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2581b4..84551f205e46 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
         struct spi_board_info *spi_bi = &ads7846_spi_board_info;
         int err;
 
-        err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-        if (err) {
-                pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-                return;
-        }
+        /*
+         * If a board defines get_pendown_state() function, request the pendown
+         * GPIO and set the GPIO debounce time.
+         * If a board does not define the get_pendown_state() function, then
+         * the ads7846 driver will setup the pendown GPIO itself.
+         */
+        if (board_pdata && board_pdata->get_pendown_state) {
+                err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+                if (err) {
+                        pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+                        return;
+                }
 
-        if (gpio_debounce)
-                gpio_set_debounce(gpio_pendown, gpio_debounce);
+                if (gpio_debounce)
+                        gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+                gpio_export(gpio_pendown, 0);
+        }
 
         spi_bi->bus_num = bus_num;
         spi_bi->irq     = gpio_to_irq(gpio_pendown);
 
+        ads7846_config.gpio_pendown = gpio_pendown;
+
         if (board_pdata) {
                 board_pdata->gpio_pendown = gpio_pendown;
+                board_pdata->gpio_pendown_debounce = gpio_debounce;
                 spi_bi->platform_data = board_pdata;
-                if (board_pdata->get_pendown_state)
-                        gpio_export(gpio_pendown, 0);
-        } else {
-                ads7846_config.gpio_pendown = gpio_pendown;
         }
 
-        if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-                gpio_free(gpio_pendown);
-
         spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 44c42057b61c..a256135d8e48 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 {
         /* PMIC part*/
         omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+        omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
         omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
         /* Register additional devices on i2c1 bus if needed */
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5683a84c6ee..6013831a043e 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,12 +26,14 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE           0x3f
@@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id)
 
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+        omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(int bus_id)
 {
         int l;
@@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id)
         dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
         pdata->flags = dev_attr->flags;
 
+        /*
+         * When waiting for completion of a i2c transfer, we need to
+         * set a wake up latency constraint for the MPU. This is to
+         * ensure quick enough wakeup from idle, when transfer
+         * completes.
+         * Only omap3 has support for constraints
+         */
+        if (cpu_is_omap34xx())
+                pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
         pdev = omap_device_build(name, bus_id, oh, pdata,
                         sizeof(struct omap_i2c_bus_platform_data),
                         NULL, 0, 0);