Merge branch 'pm-hwmods' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus

6 files changed, 133 insertions, 58 deletions

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 7d668b3b5363..947de3fb93f3 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -257,7 +257,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
         omap2_set_globals_sdrc(omap2_globals);
         omap2_set_globals_control(omap2_globals);
         omap2_set_globals_prcm(omap2_globals);
-        omap2_set_globals_uart(omap2_globals);
 }
 
 #endif
@@ -272,9 +271,6 @@ static struct omap_globals omap242x_globals = {
         .ctrl   = OMAP2420_CTRL_BASE,
         .prm    = OMAP2420_PRM_BASE,
         .cm     = OMAP2420_CM_BASE,
-        .uart1_phys     = OMAP2_UART1_BASE,
-        .uart2_phys     = OMAP2_UART2_BASE,
-        .uart3_phys     = OMAP2_UART3_BASE,
 };
 
 void __init omap2_set_globals_242x(void)
@@ -293,9 +289,6 @@ static struct omap_globals omap243x_globals = {
         .ctrl   = OMAP243X_CTRL_BASE,
         .prm    = OMAP2430_PRM_BASE,
         .cm     = OMAP2430_CM_BASE,
-        .uart1_phys     = OMAP2_UART1_BASE,
-        .uart2_phys     = OMAP2_UART2_BASE,
-        .uart3_phys     = OMAP2_UART3_BASE,
 };
 
 void __init omap2_set_globals_243x(void)
@@ -314,10 +307,6 @@ static struct omap_globals omap3_globals = {
         .ctrl   = OMAP343X_CTRL_BASE,
         .prm    = OMAP3430_PRM_BASE,
         .cm     = OMAP3430_CM_BASE,
-        .uart1_phys     = OMAP3_UART1_BASE,
-        .uart2_phys     = OMAP3_UART2_BASE,
-        .uart3_phys     = OMAP3_UART3_BASE,
-        .uart4_phys     = OMAP3_UART4_BASE,     /* Only on 3630 */
 };
 
 void __init omap2_set_globals_3xxx(void)
@@ -341,10 +330,6 @@ static struct omap_globals omap4_globals = {
         .prm    = OMAP4430_PRM_BASE,
         .cm     = OMAP4430_CM_BASE,
         .cm2    = OMAP4430_CM2_BASE,
-        .uart1_phys     = OMAP4_UART1_BASE,
-        .uart2_phys     = OMAP4_UART2_BASE,
-        .uart3_phys     = OMAP4_UART3_BASE,
-        .uart4_phys     = OMAP4_UART4_BASE,
 };
 
 void __init omap2_set_globals_443x(void)
@@ -352,7 +337,6 @@ void __init omap2_set_globals_443x(void)
         omap2_set_globals_tap(&omap4_globals);
         omap2_set_globals_control(&omap4_globals);
         omap2_set_globals_prcm(&omap4_globals);
-        omap2_set_globals_uart(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index d1920be7833b..8e88e0e5d524 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -232,46 +232,6 @@ static void omap_init_uwire(void)
 static inline void omap_init_uwire(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if     defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-
-static struct resource wdt_resources[] = {
-        {
-                .flags          = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device omap_wdt_device = {
-        .name      = "omap_wdt",
-        .id          = -1,
-        .num_resources  = ARRAY_SIZE(wdt_resources),
-        .resource       = wdt_resources,
-};
-
-static void omap_init_wdt(void)
-{
-        if (cpu_is_omap16xx())
-                wdt_resources[0].start = 0xfffeb000;
-        else if (cpu_is_omap2420())
-                wdt_resources[0].start = 0x48022000; /* WDT2 */
-        else if (cpu_is_omap2430())
-                wdt_resources[0].start = 0x49016000; /* WDT2 */
-        else if (cpu_is_omap343x())
-                wdt_resources[0].start = 0x48314000; /* WDT2 */
-        else if (cpu_is_omap44xx())
-                wdt_resources[0].start = 0x4a314000;
-        else
-                return;
-
-        wdt_resources[0].end = wdt_resources[0].start + 0x4f;
-
-        (void) platform_device_register(&omap_wdt_device);
-}
-#else
-static inline void omap_init_wdt(void) {}
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -300,7 +260,6 @@ static int __init omap_init_devices(void)
         omap_init_rng();
         omap_init_mcpdm();
         omap_init_uwire();
-        omap_init_wdt();
         return 0;
 }
 arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 2d8f98d7ae50..a9d69a09920d 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -67,7 +67,6 @@ void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
-void omap2_set_globals_uart(struct omap_globals *);
 
 void omap3_map_io(void);
 
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index af3a03941add..098f154f5d41 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -319,6 +319,8 @@
 #define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
 
+#define OMAP36XX_DMA_UART4_TX           81      /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX           82      /* S_DMA_81 */
 /*----------------------------------------------------------------------------*/
 
 #define OMAP1_DMA_TOUT_IRQ              (1 << 0)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c01d9f08a198..65e20a686713 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -345,6 +345,8 @@
 #define INT_34XX_MMC3_IRQ       94
 #define INT_34XX_GPT12_IRQ      95
 
+#define INT_36XX_UART4_IRQ      80
+
 #define INT_35XX_HECC0_IRQ              24
 #define INT_35XX_HECC1_IRQ              28
 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ   67
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
new file mode 100644
index 000000000000..0d6f076cf748
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -0,0 +1,129 @@
+/*
+ * Driver for OMAP-UART controller.
+ * Based on drivers/serial/8250.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Authors:
+ *      Govindraj R     <govindraj.raja@ti.com>
+ *      Thara Gopinath  <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <plat/control.h>
+#include <plat/mux.h>
+
+#define DRIVER_NAME     "omap-hsuart"
+
+/*
+ * Use tty device name as ttyO, [O -> OMAP]
+ * in bootargs we specify as console=ttyO0 if uart1
+ * is used as console uart.
+ */
+#define OMAP_SERIAL_NAME        "ttyO"
+
+#define OMAP_MDR1_DISABLE       0x07
+#define OMAP_MDR1_MODE13X       0x03
+#define OMAP_MDR1_MODE16X       0x00
+#define OMAP_MODE13X_SPEED      230400
+
+/*
+ * LCR = 0XBF: Switch to Configuration Mode B.
+ * In configuration mode b allow access
+ * to EFR,DLL,DLH.
+ * Reference OMAP TRM Chapter 17
+ * Section: 1.4.3 Mode Selection
+ */
+#define OMAP_UART_LCR_CONF_MDB  0XBF
+
+/* WER = 0x7F
+ * Enable module level wakeup in WER reg
+ */
+#define OMAP_UART_WER_MOD_WKUP  0X7F
+
+/* Enable XON/XOFF flow control on output */
+#define OMAP_UART_SW_TX         0x04
+
+/* Enable XON/XOFF flow control on input */
+#define OMAP_UART_SW_RX         0x04
+
+#define OMAP_UART_SYSC_RESET    0X07
+#define OMAP_UART_TCR_TRIG      0X0F
+#define OMAP_UART_SW_CLR        0XF0
+#define OMAP_UART_FIFO_CLR      0X06
+
+#define OMAP_UART_DMA_CH_FREE   -1
+
+#define RX_TIMEOUT              (3 * HZ)
+#define OMAP_MAX_HSUART_PORTS   4
+
+#define MSR_SAVE_FLAGS          UART_MSR_ANY_DELTA
+
+struct omap_uart_port_info {
+        bool                    dma_enabled;    /* To specify DMA Mode */
+        unsigned int            uartclk;        /* UART clock rate */
+        void __iomem            *membase;       /* ioremap cookie or NULL */
+        resource_size_t         mapbase;        /* resource base */
+        unsigned long           irqflags;       /* request_irq flags */
+        upf_t                   flags;          /* UPF_* flags */
+};
+
+struct uart_omap_dma {
+        u8                      uart_dma_tx;
+        u8                      uart_dma_rx;
+        int                     rx_dma_channel;
+        int                     tx_dma_channel;
+        dma_addr_t              rx_buf_dma_phys;
+        dma_addr_t              tx_buf_dma_phys;
+        unsigned int            uart_base;
+        /*
+         * Buffer for rx dma.It is not required for tx because the buffer
+         * comes from port structure.
+         */
+        unsigned char           *rx_buf;
+        unsigned int            prev_rx_dma_pos;
+        int                     tx_buf_size;
+        int                     tx_dma_used;
+        int                     rx_dma_used;
+        spinlock_t              tx_lock;
+        spinlock_t              rx_lock;
+        /* timer to poll activity on rx dma */
+        struct timer_list       rx_timer;
+        int                     rx_buf_size;
+        int                     rx_timeout;
+};
+
+struct uart_omap_port {
+        struct uart_port        port;
+        struct uart_omap_dma    uart_dma;
+        struct platform_device  *pdev;
+
+        unsigned char           ier;
+        unsigned char           lcr;
+        unsigned char           mcr;
+        unsigned char           fcr;
+        unsigned char           efr;
+
+        int                     use_dma;
+        /*
+         * Some bits in registers are cleared on a read, so they must
+         * be saved whenever the register is read but the bits will not
+         * be immediately processed.
+         */
+        unsigned int            lsr_break_flag;
+        unsigned char           msr_saved_flags;
+        char                    name[20];
+        unsigned long           port_activity;
+};
+
+#endif /* __OMAP_SERIAL_H__ */