[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 75 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
new file mode 100644
index 000000000000..787b7acec546
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG          0x010
+#define SDRC_DLLA_CTRL          0x060
+#define SDRC_DLLA_STATUS        0x064
+#define SDRC_DLLB_CTRL          0x068
+#define SDRC_DLLB_STATUS        0x06C
+#define SDRC_POWER              0x070
+#define SDRC_MR_0               0x084
+#define SDRC_RFR_CTRL_0         0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG           0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif