[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 197 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
new file mode 100644
index 000000000000..c92e4b42b289
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
+extern void omap1510_fpga_init_irq(void);
+#else
+#define omap1510_fpga_init_irq()        (0)
+#endif
+
+#define fpga_read(reg)                  __raw_readb(reg)
+#define fpga_write(val, reg)            __raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE              0xE8000000      /* VA */
+#define H2P2_DBG_FPGA_SIZE              SZ_4K           /* SIZE */
+#define H2P2_DBG_FPGA_START             0x04000000      /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV          (H2P2_DBG_FPGA_BASE + 0x10)     /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV         (H2P2_DBG_FPGA_BASE + 0x12)     /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO              (H2P2_DBG_FPGA_BASE + 0x14)     /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS              (H2P2_DBG_FPGA_BASE + 0x16)     /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS       (H2P2_DBG_FPGA_BASE + 0x18)     /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS        (H2P2_DBG_FPGA_BASE + 0x1A)     /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET         (H2P2_DBG_FPGA_BASE + 0x1C)     /* LAN Reset line */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+        /* offset 0x00 */
+        u16             smc91x[8];
+        /* offset 0x10 */
+        u16             fpga_rev;
+        u16             board_rev;
+        u16             gpio_outputs;
+        u16             leds;
+        /* offset 0x18 */
+        u16             misc_inputs;
+        u16             lan_status;
+        u16             lan_reset;
+        u16             reserved0;
+        /* offset 0x20 */
+        u16             ps2_data;
+        u16             ps2_ctrl;
+        /* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED           (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE                      0xE8000000      /* Virtual */
+#define OMAP1510_FPGA_SIZE                      SZ_4K
+#define OMAP1510_FPGA_START                     0x08000000      /* Physical */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW                   (OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH                  (OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL         (OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT                 (OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI                  (OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER                     (OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO                    (OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI                    (OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO                    (OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI                    (OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET                (OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST                       (OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO                     (OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP                       (OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO                   (OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1                     (OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2                     (OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS           (OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV                 (OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA                     (OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS                   (OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL                  (OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN               (OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO                     (OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO            (OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI            (OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO               (OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI               (OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO               (OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI               (OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL          (OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL              (OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2                     (OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2                     (OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START                (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE               0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0                (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN               (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN               (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0               (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1               (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK             (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK              (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0            (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK  (1<<0)  /* output */
+#define OMAP1510_FPGA_HID_MOSI  (1<<1)  /* output */
+#define OMAP1510_FPGA_HID_nSS   (1<<2)  /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3)  /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO  (1<<4)  /* input */
+#define OMAP1510_FPGA_HID_ATN   (1<<5)  /* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA               (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN           (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK           (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2              (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3              (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4              (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5              (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6              (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7              (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8              (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9              (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10             (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11             (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12             (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER              (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1          (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2          (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS            (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17             (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM           (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A         (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B         (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD            (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22             (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23             (OMAP_FPGA_IRQ_BASE + 23)
+
+#endif