[ARM] nommu: Initial uCLinux support for MMU-based CPUs

In noMMU mode, various of functions which are defined in mm/proc-*.S
is not valid or needed to be avoided. i.g. switch_mm is not needed,
just returns and this makes the I & D caches are valid which shows
great improvement of performance including task switching and IPC.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 9 insertions, 0 deletions

diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index be6d081ff2b7..bcd5ee022e00 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2000 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -101,7 +102,9 @@ ENTRY(cpu_arm1020e_reset)
         mov     ip, #0
         mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches
         mcr     p15, 0, ip, c7, c10, 4          @ drain WB
+#ifdef CONFIG_MMU
         mcr     p15, 0, ip, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mrc     p15, 0, ip, c1, c0, 0           @ ctrl register
         bic     ip, ip, #0x000f                 @ ............wcam
         bic     ip, ip, #0x1100                 @ ...i...s........
@@ -344,6 +347,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area)
  */
         .align  5
 ENTRY(cpu_arm1020e_switch_mm)
+#ifdef CONFIG_MMU
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mcr     p15, 0, r3, c7, c10, 4
         mov     r1, #0xF                        @ 16 segments
@@ -367,6 +371,7 @@ ENTRY(cpu_arm1020e_switch_mm)
         mcr     p15, 0, r1, c7, c10, 4          @ drain WB
         mcr     p15, 0, r0, c2, c0, 0           @ load page table pointer
         mcr     p15, 0, r1, c8, c7, 0           @ invalidate I & D TLBs
+#endif
         mov     pc, lr
         
 /*
@@ -376,6 +381,7 @@ ENTRY(cpu_arm1020e_switch_mm)
  */
         .align  5
 ENTRY(cpu_arm1020e_set_pte)
+#ifdef CONFIG_MMU
         str     r1, [r0], #-2048                @ linux version
 
         eor     r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
@@ -403,6 +409,7 @@ ENTRY(cpu_arm1020e_set_pte)
 #ifndef CONFIG_CPU_DCACHE_DISABLE
         mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
 #endif
+#endif /* CONFIG_MMU */
         mov     pc, lr
 
         __INIT
@@ -412,7 +419,9 @@ __arm1020e_setup:
         mov     r0, #0
         mcr     p15, 0, r0, c7, c7              @ invalidate I,D caches on v4
         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer on v4
+#ifdef CONFIG_MMU
         mcr     p15, 0, r0, c8, c7              @ invalidate I,D TLBs on v4
+#endif
         mrc     p15, 0, r0, c1, c0              @ get control register v4
         ldr     r5, arm1020e_cr1_clear
         bic     r0, r0, r5