Merge branch 'wip-2.6.34' into old-private-masterarchived-private-master

9 files changed, 149 insertions, 321 deletions

diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 9efb569cdb60..52acda7061b7 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -25,29 +25,39 @@
 #define COLLIE_GPIO_VPEN        (COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG   SCOOP_GPCR_PA19
 
-#define COLLIE_SCOOP_IO_DIR     ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR     (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
                                 COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
-                                COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT     ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+                                COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT     (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
 
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs for gpiolib  */
 
-#define COLLIE_GPIO_ON_KEY              GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN               GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT            GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ              GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT        GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET       GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON             GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON         GPIO_GPIO (18)
-#define COLLIE_GPIO_CO                  GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK             GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD               GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ         GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP              GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT              GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW        GPIO_GPIO (26)
+#define COLLIE_GPIO_ON_KEY              (0)
+#define COLLIE_GPIO_AC_IN               (1)
+#define COLLIE_GPIO_SDIO_INT            (11)
+#define COLLIE_GPIO_CF_IRQ              (14)
+#define COLLIE_GPIO_nREMOCON_INT        (15)
+#define COLLIE_GPIO_UCB1x00_RESET       (16)
+#define COLLIE_GPIO_nMIC_ON             (17)
+#define COLLIE_GPIO_nREMOCON_ON         (18)
+#define COLLIE_GPIO_CO                  (20)
+#define COLLIE_GPIO_MCP_CLK             (21)
+#define COLLIE_GPIO_CF_CD               (22)
+#define COLLIE_GPIO_UCB1x00_IRQ         (23)
+#define COLLIE_GPIO_WAKEUP              (24)
+#define COLLIE_GPIO_GA_INT              (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW        (26)
 
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY             GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN              GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT       GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET      GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON            GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON        GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO                 GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP             GPIO_GPIO(24)
 /* Interrupts */
 
 #define COLLIE_IRQ_GPIO_ON_KEY          IRQ_GPIO0
@@ -62,27 +72,21 @@
 #define COLLIE_IRQ_GPIO_GA_INT          IRQ_GPIO25
 #define COLLIE_IRQ_GPIO_MAIN_BAT_LOW    IRQ_GPIO26
 
-#define COLLIE_LCM_IRQ_GPIO_RTS         IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS         IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR         IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR         IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT  IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP      IRQ_LOCOMO_GPIO14
-
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0        /* GPIO0=Version                 */
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1        /* GPIO1=TBL_CHK                 */
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2        /* GPIO2=VPNE_ON                 */
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3        /* GPIO3=IR_ON                   */
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4        /* GPIO4=AMP_ON                  */
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5        /* GPIO5=Version                 */
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5        /* GPIO5=fs 8k LPF               */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6        /* GPIO6=BUZZER BIAS             */
-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7        /* GPIO7=MBAT_ON                 */
-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8        /* GPIO8=BBAT_ON                 */
-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9        /* GPIO9=TMP_ON                  */
-#define COLLIE_TC35143_GPIO_IN          ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT         ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
-                                        UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+#define COLLIE_TC35143_GPIO_BASE        (GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON             (COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON             (COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON              (COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN          (UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT         (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+                                                | UCB_IO_6)
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 1f0634d92702..336adccea542 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-                .macro  addruart,rx
+                .macro  addruart, rx, tmp
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0x80000000        @ physical base address
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 582a0c92da53..7befc104e9a9 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -49,20 +49,9 @@ static inline void gpio_set_value(unsigned gpio, int value)
 
 #define gpio_cansleep   __gpio_cansleep
 
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-        if (gpio < 11)
-                return IRQ_GPIO0 + gpio;
-        else
-                return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-        if (irq < IRQ_GPIO11_27)
-                return irq - IRQ_GPIO0;
-        else
-                return irq - IRQ_GPIO11 + 11;
-}
+#define gpio_to_irq(gpio)       ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
+                                        (IRQ_GPIO11 - 11 + gpio))
+#define irq_to_gpio(irq)        ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
+                                        (irq - IRQ_GPIO11 + 11))
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa47421..000000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND      ((__force pm_request_t) 1)      /* enter D1-D3 */
-#define PM_RESUME       ((__force pm_request_t) 2)      /* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS        (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS       SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS       SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT        0xf0000000
-#define H3600_BANK_2_VIRT       0xf1000000
-#define H3600_BANK_4_VIRT       0xf3800000
-
-/*
-   Machine-independent GPIO definitions
-   --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON        GPIO_GPIO (0)   /* Also known as the "off button"  */
-
-#define GPIO_H3600_PCMCIA_CD1           GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1          GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA              GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE              GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK             GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0           GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK              GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0          GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD              GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ              GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS              GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS              GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON    IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1       IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1      IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0       IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0      IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD          IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ          IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS          IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
-        IPAQ_EGPIO_LCD_POWER,     /* Power to the LCD panel */
-        IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-        IPAQ_EGPIO_AUDIO_ON,      /* Audio power */
-        IPAQ_EGPIO_QMUTE,         /* Audio muting */
-        IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-        IPAQ_EGPIO_OPT_ON,        /* Power to extension sleeves */
-        IPAQ_EGPIO_CARD_RESET,    /* Reset PCMCIA cards on extension sleeve (???) */
-        IPAQ_EGPIO_OPT_RESET,     /* Reset option pack (???) */
-        IPAQ_EGPIO_IR_ON,         /* IR sensor/emitter power */
-        IPAQ_EGPIO_IR_FSEL,       /* IR speed selection 1->fast, 0->slow */
-        IPAQ_EGPIO_RS232_ON,      /* Maxim RS232 chip power */
-        IPAQ_EGPIO_VPP_ON,        /* Turn on power to flash programming */
-        IPAQ_EGPIO_LCD_ENABLE,    /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
deleted file mode 100644
index a36ca76d018b..000000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON                GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3                GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE                GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON            GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON               GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON           GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON                GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL              GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0             GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1             GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON        GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK             GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET              GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET          IRQ_GPIO27
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON              (1 << 0)
-#define EGPIO_H3600_CARD_RESET          (1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_H3600_OPT_RESET           (1 << 2)   /* reset the attached option pack.  active high. */
-#define EGPIO_H3600_CODEC_NRESET        (1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON        (1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON              (1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_H3600_LCD_ON              (1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_H3600_RS232_ON            (1 << 7)   /* UART3 transceiver force on.  Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI             (1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_H3600_IR_ON               (1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_H3600_AUD_AMP_ON          (1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_H3600_AUD_PWR_ON          (1 << 11)  /* apply power to reset of audio circuit.  active high. */
-#define EGPIO_H3600_QMUTE               (1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_H3600_IR_FSEL             (1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON           (1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON             (1 << 15)  /* enable 9V and -6.5V to LCD. */
-
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 000000000000..7d9df16f04a2
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,94 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS        (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS       SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS       SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT        0xf0000000
+#define H3600_BANK_2_VIRT       0xf1000000
+#define H3600_BANK_4_VIRT       0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON           0
+#define H3XXX_GPIO_PCMCIA_CD1           10
+#define H3XXX_GPIO_PCMCIA_IRQ1          11
+#define H3XXX_GPIO_PCMCIA_CD0           17
+#define H3XXX_GPIO_ACTION_BUTTON        18
+#define H3XXX_GPIO_SYS_CLK              19
+#define H3XXX_GPIO_PCMCIA_IRQ0          21
+#define H3XXX_GPIO_COM_DCD              23
+#define H3XXX_GPIO_OPTION               24
+#define H3XXX_GPIO_COM_CTS              25
+#define H3XXX_GPIO_COM_RTS              26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON                2
+#define H3100_GPIO_QMUTE                4
+#define H3100_GPIO_LCD_3V_ON            5
+#define H3100_GPIO_AUD_ON               6
+#define H3100_GPIO_AUD_PWR_ON           7
+#define H3100_GPIO_IR_ON                8
+#define H3100_GPIO_IR_FSEL              9
+
+#define H3600_GPIO_CLK_SET0             12      /* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1             13
+#define H3600_GPIO_SOFT_RESET           20      /* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK             22
+#define H3600_GPIO_OPT_DET              27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE                (GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON              (H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET          (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card.  active high. */
+#define H3XXX_EGPIO_OPT_RESET           (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack.  active high. */
+#define H3XXX_EGPIO_CODEC_NRESET        (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341.  active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON        (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON              (H3XXX_EGPIO_BASE + 5) /* full power to option pack.  active high. */
+#define H3XXX_EGPIO_LCD_ON              (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD.  active high. */
+#define H3XXX_EGPIO_RS232_ON            (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI             (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable.  active high. */
+#define H3600_EGPIO_IR_ON               (H3XXX_EGPIO_BASE + 9) /* apply power to IR module.  active high. */
+#define H3600_EGPIO_AUD_AMP_ON          (H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp.  active high. */
+#define H3600_EGPIO_AUD_PWR_ON          (H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit.  active high. */
+#define H3600_EGPIO_QMUTE               (H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341.  active high. */
+#define H3600_EGPIO_IR_FSEL             (H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON           (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON             (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+struct gpio_default_state {
+        int gpio;
+        int mode;
+        const char *name;
+};
+
+#define GPIO_MODE_IN    -1
+#define GPIO_MODE_OUT0  0
+#define GPIO_MODE_OUT1  1
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index ae81f80b0cf9..8c8845b5ae5b 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -68,93 +68,17 @@
 #define IRQ_BOARD_START         49
 #define IRQ_BOARD_END           65
 
-#define IRQ_SA1111_START        (IRQ_BOARD_END)
-#define IRQ_GPAIN0              (IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1              (IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2              (IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3              (IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0              (IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1              (IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2              (IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3              (IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4              (IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5              (IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0              (IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1              (IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2              (IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3              (IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4              (IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5              (IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6              (IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7              (IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT             (IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT             (IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT        (IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT             (IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT             (IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT        (IRQ_BOARD_END + 23)
-#define SSPXMTINT               (IRQ_BOARD_END + 24)
-#define SSPRCVINT               (IRQ_BOARD_END + 25)
-#define SSPROR                  (IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA          (IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA          (IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB          (IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB          (IRQ_BOARD_END + 35)
-#define AUDTFSR                 (IRQ_BOARD_END + 36)
-#define AUDRFSR                 (IRQ_BOARD_END + 37)
-#define AUDTUR                  (IRQ_BOARD_END + 38)
-#define AUDROR                  (IRQ_BOARD_END + 39)
-#define AUDDTS                  (IRQ_BOARD_END + 40)
-#define AUDRDD                  (IRQ_BOARD_END + 41)
-#define AUDSTO                  (IRQ_BOARD_END + 42)
-#define IRQ_USBPWR              (IRQ_BOARD_END + 43)
-#define IRQ_HCIM                (IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC          (IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP           (IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR           (IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME     (IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT       (IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT       (IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID         (IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID         (IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG      (IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG      (IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START        (IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY          (IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0        (IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1        (IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2        (IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3        (IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4        (IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5        (IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6        (IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7        (IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8        (IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9        (IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10       (IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11       (IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12       (IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13       (IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14       (IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15       (IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT           (IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR      (IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW      (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND     (IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND     (IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS                 (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS                 (IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS                 (IRQ_BOARD_END + 55)
+#elif defined(CONFIG_SHARPSL_LOCOMO)
+#define NR_IRQS                 (IRQ_BOARD_START + 4)
 #else
 #define NR_IRQS                 (IRQ_BOARD_START)
 #endif
@@ -166,10 +90,3 @@
 #define IRQ_NEPONSET_SMC9196    (IRQ_BOARD_START + 0)
 #define IRQ_NEPONSET_USAR       (IRQ_BOARD_START + 1)
 #define IRQ_NEPONSET_SA1111     (IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE     (IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE    (IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE      (IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE     (IRQ_BOARD_START + 3)
-
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index fb8b09a57ad7..ed1a331508a7 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,6 +16,7 @@ struct mcp_plat_data {
         u32 mccr0;
         u32 mccr1;
         unsigned int sclk_rate;
+        int gpio_base;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
index ec8fdc5a3606..b3d002398480 100644
--- a/arch/arm/mach-sa1100/include/mach/vmalloc.h
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-sa1100/include/mach/vmalloc.h
  */
-#define VMALLOC_END       (0xe8000000)
+#define VMALLOC_END       (0xe8000000UL)