Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc cleanups (part 2) from Olof Johansson:
 "More cleanups, continuing an earlier set with omap and samsung
  specific cleanups.  These could not go into the first set because they
  have dependencies on various other series that in turn depend on the
  first cleanups."

Fixed up conflicts in arch/arm/plat-omap/counter_32k.c due to commit
bd0493eaaf5c: "move read_{boot,persistent}_clock to the architecture
level" that changed how the persistent clocks were handled.  And trivial
conflicts in arch/arm/mach-omap1/common.h due to just independent
changes close to each other.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  ARM: SAMSUNG: merge plat-s5p into plat-samsung
  ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig
  ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung
  ARM: SAMSUNG: move platform device for s5p uart into plat-samsung
  ARM: SAMSUNG: move hr timer for common s5p into plat-samsung
  ARM: SAMSUNG: move pm part for common s5p into plat-samsung
  ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung
  ARM: SAMSUNG: move clock part for common s5p into plat-samsung
  ARM: S3C24XX: Use common macro to define resources on dev-uart.c
  ARM: S3C24XX: move common clock init into common.c
  ARM: S3C24XX: move common power-management code to mach-s3c24xx
  ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c
  ARM: S3C24XX: move plat-s3c24xx/cpu.c
  ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX
  ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX
  GPMC: add ECC control definitions
  ARM: OMAP2+: dmtimer: remove redundant sysconfig context restore
  ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  ARM: OMAP: AM35xx: remove redunant cpu_is checks for AM3505
  ARM: OMAP1: Pass dma request lines in platform data to MMC driver
  ...

5 files changed, 637 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 3518fe812d5f..270a0b6f4f22 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,6 +14,8 @@ obj-				:=
 
 # core
 
+obj-y                           += common.o
+
 obj-$(CONFIG_CPU_S3C2410)       += s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)       += dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)        += pm-s3c2410.o sleep-s3c2410.o
@@ -33,6 +35,10 @@ obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 
 obj-$(CONFIG_CPU_S3C2443)       += s3c2443.o irq-s3c2443.o clock-s3c2443.o
 
+# PM
+
+obj-$(CONFIG_PM)                += pm.o irq-pm.o sleep.o
+
 # common code
 
 obj-$(CONFIG_S3C2443_COMMON)    += common-s3c2443.o
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
new file mode 100644
index 000000000000..56cdd34cce41
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -0,0 +1,303 @@
+/* linux/arch/arm/plat-s3c24xx/cpu.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *      http://www.simtec.co.uk/products/SWLINUX/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for S3C24XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <asm/irq.h>
+#include <asm/cacheflush.h>
+#include <asm/system_info.h>
+#include <asm/system_misc.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s3c2410.h>
+#include <plat/s3c2412.h>
+#include <plat/s3c2416.h>
+#include <plat/s3c244x.h>
+#include <plat/s3c2443.h>
+#include <plat/cpu-freq.h>
+#include <plat/pll.h>
+
+/* table of supported CPUs */
+
+static const char name_s3c2410[]  = "S3C2410";
+static const char name_s3c2412[]  = "S3C2412";
+static const char name_s3c2416[]  = "S3C2416/S3C2450";
+static const char name_s3c2440[]  = "S3C2440";
+static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2442b[]  = "S3C2442B";
+static const char name_s3c2443[]  = "S3C2443";
+static const char name_s3c2410a[] = "S3C2410A";
+static const char name_s3c2440a[] = "S3C2440A";
+
+static struct cpu_table cpu_ids[] __initdata = {
+        {
+                .idcode         = 0x32410000,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2410_map_io,
+                .init_clocks    = s3c2410_init_clocks,
+                .init_uarts     = s3c2410_init_uarts,
+                .init           = s3c2410_init,
+                .name           = name_s3c2410
+        },
+        {
+                .idcode         = 0x32410002,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2410_map_io,
+                .init_clocks    = s3c2410_init_clocks,
+                .init_uarts     = s3c2410_init_uarts,
+                .init           = s3c2410a_init,
+                .name           = name_s3c2410a
+        },
+        {
+                .idcode         = 0x32440000,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2440_map_io,
+                .init_clocks    = s3c244x_init_clocks,
+                .init_uarts     = s3c244x_init_uarts,
+                .init           = s3c2440_init,
+                .name           = name_s3c2440
+        },
+        {
+                .idcode         = 0x32440001,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2440_map_io,
+                .init_clocks    = s3c244x_init_clocks,
+                .init_uarts     = s3c244x_init_uarts,
+                .init           = s3c2440_init,
+                .name           = name_s3c2440a
+        },
+        {
+                .idcode         = 0x32440aaa,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2442_map_io,
+                .init_clocks    = s3c244x_init_clocks,
+                .init_uarts     = s3c244x_init_uarts,
+                .init           = s3c2442_init,
+                .name           = name_s3c2442
+        },
+        {
+                .idcode         = 0x32440aab,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2442_map_io,
+                .init_clocks    = s3c244x_init_clocks,
+                .init_uarts     = s3c244x_init_uarts,
+                .init           = s3c2442_init,
+                .name           = name_s3c2442b
+        },
+        {
+                .idcode         = 0x32412001,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2412_map_io,
+                .init_clocks    = s3c2412_init_clocks,
+                .init_uarts     = s3c2412_init_uarts,
+                .init           = s3c2412_init,
+                .name           = name_s3c2412,
+        },
+        {                       /* a newer version of the s3c2412 */
+                .idcode         = 0x32412003,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2412_map_io,
+                .init_clocks    = s3c2412_init_clocks,
+                .init_uarts     = s3c2412_init_uarts,
+                .init           = s3c2412_init,
+                .name           = name_s3c2412,
+        },
+        {                       /* a strange version of the s3c2416 */
+                .idcode         = 0x32450003,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2416_map_io,
+                .init_clocks    = s3c2416_init_clocks,
+                .init_uarts     = s3c2416_init_uarts,
+                .init           = s3c2416_init,
+                .name           = name_s3c2416,
+        },
+        {
+                .idcode         = 0x32443001,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c2443_map_io,
+                .init_clocks    = s3c2443_init_clocks,
+                .init_uarts     = s3c2443_init_uarts,
+                .init           = s3c2443_init,
+                .name           = name_s3c2443,
+        },
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s3c_iodesc[] __initdata = {
+        IODESC_ENT(GPIO),
+        IODESC_ENT(IRQ),
+        IODESC_ENT(MEMCTRL),
+        IODESC_ENT(UART)
+};
+
+/* read cpu identificaiton code */
+
+static unsigned long s3c24xx_read_idcode_v5(void)
+{
+#if defined(CONFIG_CPU_S3C2416)
+        /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
+
+        u32 gs = __raw_readl(S3C24XX_GSTATUS1);
+
+        /* test for s3c2416 or similar device */
+        if ((gs >> 16) == 0x3245)
+                return gs;
+#endif
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+        return __raw_readl(S3C2412_GSTATUS1);
+#else
+        return 1UL;     /* don't look like an 2400 */
+#endif
+}
+
+static unsigned long s3c24xx_read_idcode_v4(void)
+{
+        return __raw_readl(S3C2410_GSTATUS1);
+}
+
+static void s3c24xx_default_idle(void)
+{
+        unsigned long tmp;
+        int i;
+
+        /* idle the system by using the idle mode which will wait for an
+         * interrupt to happen before restarting the system.
+         */
+
+        /* Warning: going into idle state upsets jtag scanning */
+
+        __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+                     S3C2410_CLKCON);
+
+        /* the samsung port seems to do a loop and then unset idle.. */
+        for (i = 0; i < 50; i++)
+                tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+        /* this bit is not cleared on re-start... */
+
+        __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+                     S3C2410_CLKCON);
+}
+
+void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
+{
+        arm_pm_idle = s3c24xx_default_idle;
+
+        /* initialise the io descriptors we need for initialisation */
+        iotable_init(mach_desc, size);
+        iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+
+        if (cpu_architecture() >= CPU_ARCH_ARMv5) {
+                samsung_cpu_id = s3c24xx_read_idcode_v5();
+        } else {
+                samsung_cpu_id = s3c24xx_read_idcode_v4();
+        }
+        s3c24xx_init_cpu();
+
+        s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+        [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
+        [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
+                        IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
+                        NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+        [0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
+        [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
+                        IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
+                        NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+        [0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
+        [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
+                        IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
+                        NULL, IORESOURCE_IRQ)
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+        [0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
+        [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
+                        IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
+                        NULL, IORESOURCE_IRQ)
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+        [0] = {
+                .resources      = s3c2410_uart0_resource,
+                .nr_resources   = ARRAY_SIZE(s3c2410_uart0_resource),
+        },
+        [1] = {
+                .resources      = s3c2410_uart1_resource,
+                .nr_resources   = ARRAY_SIZE(s3c2410_uart1_resource),
+        },
+        [2] = {
+                .resources      = s3c2410_uart2_resource,
+                .nr_resources   = ARRAY_SIZE(s3c2410_uart2_resource),
+        },
+        [3] = {
+                .resources      = s3c2410_uart3_resource,
+                .nr_resources   = ARRAY_SIZE(s3c2410_uart3_resource),
+        },
+};
+
+/* initialise all the clocks */
+
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+                                           unsigned long hclk,
+                                           unsigned long pclk)
+{
+        clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+                                        clk_xtal.rate);
+
+        clk_mpll.rate = fclk;
+        clk_h.rate = hclk;
+        clk_p.rate = pclk;
+        clk_f.rate = fclk;
+}
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
new file mode 100644
index 000000000000..0efb2e2848c8
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -0,0 +1,95 @@
+/* linux/arch/arm/plat-s3c24xx/irq-om.c
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24XX - IRQ PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#include <asm/irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow      = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_eintallow     = 0x0000fff0L;
+
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
+{
+        unsigned long irqbit = 1 << (data->irq - IRQ_EINT0);
+
+        if (!(s3c_irqwake_intallow & irqbit))
+                return -ENOENT;
+
+        printk(KERN_INFO "wake %s for irq %d\n",
+               state ? "enabled" : "disabled", data->irq);
+
+        if (!state)
+                s3c_irqwake_intmask |= irqbit;
+        else
+                s3c_irqwake_intmask &= ~irqbit;
+
+        return 0;
+}
+
+static struct sleep_save irq_save[] = {
+        SAVE_ITEM(S3C2410_INTMSK),
+        SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(void)
+{
+        unsigned int i;
+
+        for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+                save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+        for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+                save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+        s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+        save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+        return 0;
+}
+
+void s3c24xx_irq_resume(void)
+{
+        unsigned int i;
+
+        for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+                __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+        for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+                __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+        s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+        __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+}
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
new file mode 100644
index 000000000000..60627e63a254
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Power Manager (Suspend-To-RAM) support
+ *
+ * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Parts based on arch/arm/mach-pxa/pm.c
+ *
+ * Thanks to Dimitry Andric for debugging
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
+
+#include <asm/mach/time.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/pm.h>
+
+#define PFX "s3c24xx-pm: "
+
+static struct sleep_save core_save[] = {
+        SAVE_ITEM(S3C2410_LOCKTIME),
+        SAVE_ITEM(S3C2410_CLKCON),
+
+        /* we restore the timings here, with the proviso that the board
+         * brings the system up in an slower, or equal frequency setting
+         * to the original system.
+         *
+         * if we cannot guarantee this, then things are going to go very
+         * wrong here, as we modify the refresh and both pll settings.
+         */
+
+        SAVE_ITEM(S3C2410_BWSCON),
+        SAVE_ITEM(S3C2410_BANKCON0),
+        SAVE_ITEM(S3C2410_BANKCON1),
+        SAVE_ITEM(S3C2410_BANKCON2),
+        SAVE_ITEM(S3C2410_BANKCON3),
+        SAVE_ITEM(S3C2410_BANKCON4),
+        SAVE_ITEM(S3C2410_BANKCON5),
+
+#ifndef CONFIG_CPU_FREQ
+        SAVE_ITEM(S3C2410_CLKDIVN),
+        SAVE_ITEM(S3C2410_MPLLCON),
+        SAVE_ITEM(S3C2410_REFRESH),
+#endif
+        SAVE_ITEM(S3C2410_UPLLCON),
+        SAVE_ITEM(S3C2410_CLKSLOW),
+};
+
+static struct sleep_save misc_save[] = {
+        SAVE_ITEM(S3C2410_DCLKCON),
+};
+
+/* s3c_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+        unsigned long irqstate;
+        unsigned long pinstate;
+        int irq = gpio_to_irq(pin);
+
+        if (irqoffs < 4)
+                irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
+        else
+                irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
+
+        pinstate = s3c_gpio_getcfg(pin);
+
+        if (!irqstate) {
+                if (pinstate == S3C2410_GPIO_IRQ)
+                        S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
+        } else {
+                if (pinstate == S3C2410_GPIO_IRQ) {
+                        S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+                        s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+                }
+        }
+}
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+        int pin;
+
+        /* for each of the external interrupts (EINT0..EINT15) we
+         * need to check wether it is an external interrupt source,
+         * and then configure it as an input if it is not
+        */
+
+        for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+                s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
+        }
+
+        for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+                s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
+        }
+}
+
+
+void s3c_pm_restore_core(void)
+{
+        s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+        s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+        s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+        s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
new file mode 100644
index 000000000000..c56612569b40
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/sleep.S
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-s3c24xx/sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *      Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *      Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
+#include <plat/regs-serial.h>
+
+/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
+ * reset the UART configuration, only enable if you really need this!
+*/
+//#define CONFIG_DEBUG_RESUME
+
+        .text
+
+        /* sleep magic, to allow the bootloader to check for an valid
+         * image to resume to. Must be the first word before the
+         * s3c_cpu_resume entry.
+        */
+
+        .word   0x2bedf00d
+
+        /* s3c_cpu_resume
+         *
+         * resume code entry for bootloader to call
+        */
+
+ENTRY(s3c_cpu_resume)
+        mov     r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+        msr     cpsr_c, r0
+
+        @@ load UART to allow us to print the two characters for
+        @@ resume debug
+
+        mov     r2, #S3C24XX_PA_UART & 0xff000000
+        orr     r2, r2, #S3C24XX_PA_UART & 0xff000
+
+#if 0
+        /* SMDK2440 LED set */
+        mov     r14, #S3C24XX_PA_GPIO
+        ldr     r12, [ r14, #0x54 ]
+        bic     r12, r12, #3<<4
+        orr     r12, r12, #1<<7
+        str     r12, [ r14, #0x54 ]
+#endif
+
+#ifdef CONFIG_DEBUG_RESUME
+        mov     r3, #'L'
+        strb    r3, [ r2, #S3C2410_UTXH ]
+1001:
+        ldrb    r14, [ r3, #S3C2410_UTRSTAT ]
+        tst     r14, #S3C2410_UTRSTAT_TXE
+        beq     1001b
+#endif /* CONFIG_DEBUG_RESUME */
+
+        b       cpu_resume