[ARM] S3C24XX: GPIO: Change usb-simtec.c to use gpiolib.

Make arch/arm/mach-s3c2410/usb-simtec.c use gpiolib to
manage gpio access.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 24 insertions, 7 deletions

diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index dd45eb4a6f0c..6cd9377ddb82 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -22,6 +22,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -30,7 +31,6 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -54,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
         power_state[port] = to;
 
         if (power_state[0] && power_state[1])
-                s3c2410_gpio_setpin(S3C2410_GPB(4), 0);
+                gpio_set_value(S3C2410_GPB(4), 0);
         else
-                s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
+                gpio_set_value(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -64,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
         struct s3c2410_hcd_info *info = pw;
 
-        if (s3c2410_gpio_getpin(S3C2410_GPG(10)) == 0) {
+        if (gpio_get_value(S3C2410_GPG(10)) == 0) {
                 pr_debug("usb_simtec: over-current irq (oc detected)\n");
                 s3c2410_usb_report_oc(info, 3);
         } else {
@@ -107,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
 
 int usb_simtec_init(void)
 {
+        int ret;
+
         printk("USB Power Control, (c) 2004 Simtec Electronics\n");
-        s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-        s3c2410_gpio_cfgpin(S3C2410_GPB(4), S3C2410_GPIO_OUTPUT);
-        s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
+        ret = gpio_request(S3C2410_GPB(4), "USB power control");
+        if (ret < 0) {
+                pr_err("%s: failed to get GPB4\n", __func__);
+                return ret;
+        }
+
+        ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+        if (ret < 0) {
+                pr_err("%s: failed to get GPG10\n", __func__);
+                gpio_free(S3C2410_GPB(4));
+                return ret;
+        }
+
+        /* turn power on */
+        gpio_direction_output(S3C2410_GPB(4), 1);
+        gpio_direction_input(S3C2410_GPG(10));
+
+        s3c_device_usb.dev.platform_data = &usb_simtec_info;
         return 0;
 }