RealView: Move the IRQ_* definitions out of the board-*.h files

The IRQ_* macros need to be made visible via the mach/irqs.h file but
without the additional macros defined in the board-*.h files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

1 files changed, 98 insertions, 0 deletions

diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 000000000000..86792a9f2ab6
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START                      32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT     (IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE     (IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE    (IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG       (IRQ_PBA8_GIC_START + 0)        /* Watchdog timer */
+#define IRQ_PBA8_SOFT           (IRQ_PBA8_GIC_START + 1)        /* Software interrupt */
+#define IRQ_PBA8_COMMRx         (IRQ_PBA8_GIC_START + 2)        /* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx         (IRQ_PBA8_GIC_START + 3)        /* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1       (IRQ_PBA8_GIC_START + 4)        /* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3       (IRQ_PBA8_GIC_START + 5)        /* Timer 2/3 */
+#define IRQ_PBA8_GPIO0          (IRQ_PBA8_GIC_START + 6)        /* GPIO 0 */
+#define IRQ_PBA8_GPIO1          (IRQ_PBA8_GIC_START + 7)        /* GPIO 1 */
+#define IRQ_PBA8_GPIO2          (IRQ_PBA8_GIC_START + 8)        /* GPIO 2 */
+                                                                /* 9 reserved */
+#define IRQ_PBA8_RTC            (IRQ_PBA8_GIC_START + 10)       /* Real Time Clock */
+#define IRQ_PBA8_SSP            (IRQ_PBA8_GIC_START + 11)       /* Synchronous Serial Port */
+#define IRQ_PBA8_UART0          (IRQ_PBA8_GIC_START + 12)       /* UART 0 on development chip */
+#define IRQ_PBA8_UART1          (IRQ_PBA8_GIC_START + 13)       /* UART 1 on development chip */
+#define IRQ_PBA8_UART2          (IRQ_PBA8_GIC_START + 14)       /* UART 2 on development chip */
+#define IRQ_PBA8_UART3          (IRQ_PBA8_GIC_START + 15)       /* UART 3 on development chip */
+#define IRQ_PBA8_SCI            (IRQ_PBA8_GIC_START + 16)       /* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A         (IRQ_PBA8_GIC_START + 17)       /* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B         (IRQ_PBA8_GIC_START + 18)       /* Multimedia Card 0B */
+#define IRQ_PBA8_AACI           (IRQ_PBA8_GIC_START + 19)       /* Audio Codec */
+#define IRQ_PBA8_KMI0           (IRQ_PBA8_GIC_START + 20)       /* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1           (IRQ_PBA8_GIC_START + 21)       /* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD        (IRQ_PBA8_GIC_START + 22)       /* Character LCD */
+#define IRQ_PBA8_CLCD           (IRQ_PBA8_GIC_START + 23)       /* CLCD controller */
+#define IRQ_PBA8_DMAC           (IRQ_PBA8_GIC_START + 24)       /* DMA controller */
+#define IRQ_PBA8_PWRFAIL        (IRQ_PBA8_GIC_START + 25)       /* Power failure */
+#define IRQ_PBA8_PISMO          (IRQ_PBA8_GIC_START + 26)       /* PISMO interface */
+#define IRQ_PBA8_DoC            (IRQ_PBA8_GIC_START + 27)       /* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH            (IRQ_PBA8_GIC_START + 28)       /* Ethernet controller */
+#define IRQ_PBA8_USB            (IRQ_PBA8_GIC_START + 29)       /* USB controller */
+#define IRQ_PBA8_TSPEN          (IRQ_PBA8_GIC_START + 30)       /* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD         (IRQ_PBA8_GIC_START + 31)       /* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0           (IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1           (IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2           (IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3           (IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC            -1
+#define IRQ_PBA8_SCTL           -1
+
+#define NR_GIC_PBA8             1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8            (IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS                 NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR              NR_GIC_PBA8
+#endif
+
+#endif  /* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif  /* __MACH_IRQS_PBA8_H */