RealView: Move the IRQ_* definitions out of the board-*.h files

The IRQ_* macros need to be made visible via the mach/irqs.h file but
without the additional macros defined in the board-*.h files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

1 files changed, 0 insertions, 77 deletions

diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b16e5b..4dfc67a4f45f 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
 #define REALVIEW_PBA8_PCI_IO_SIZE               0x1000          /* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE              0x20000000      /* 512 MB */
 
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START                      32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT     (IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE     (IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE    (IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG       (IRQ_PBA8_GIC_START + 0)        /* Watchdog timer */
-#define IRQ_PBA8_SOFT           (IRQ_PBA8_GIC_START + 1)        /* Software interrupt */
-#define IRQ_PBA8_COMMRx         (IRQ_PBA8_GIC_START + 2)        /* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx         (IRQ_PBA8_GIC_START + 3)        /* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1       (IRQ_PBA8_GIC_START + 4)        /* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3       (IRQ_PBA8_GIC_START + 5)        /* Timer 2/3 */
-#define IRQ_PBA8_GPIO0          (IRQ_PBA8_GIC_START + 6)        /* GPIO 0 */
-#define IRQ_PBA8_GPIO1          (IRQ_PBA8_GIC_START + 7)        /* GPIO 1 */
-#define IRQ_PBA8_GPIO2          (IRQ_PBA8_GIC_START + 8)        /* GPIO 2 */
-                                                                /* 9 reserved */
-#define IRQ_PBA8_RTC            (IRQ_PBA8_GIC_START + 10)       /* Real Time Clock */
-#define IRQ_PBA8_SSP            (IRQ_PBA8_GIC_START + 11)       /* Synchronous Serial Port */
-#define IRQ_PBA8_UART0          (IRQ_PBA8_GIC_START + 12)       /* UART 0 on development chip */
-#define IRQ_PBA8_UART1          (IRQ_PBA8_GIC_START + 13)       /* UART 1 on development chip */
-#define IRQ_PBA8_UART2          (IRQ_PBA8_GIC_START + 14)       /* UART 2 on development chip */
-#define IRQ_PBA8_UART3          (IRQ_PBA8_GIC_START + 15)       /* UART 3 on development chip */
-#define IRQ_PBA8_SCI            (IRQ_PBA8_GIC_START + 16)       /* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A         (IRQ_PBA8_GIC_START + 17)       /* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B         (IRQ_PBA8_GIC_START + 18)       /* Multimedia Card 0B */
-#define IRQ_PBA8_AACI           (IRQ_PBA8_GIC_START + 19)       /* Audio Codec */
-#define IRQ_PBA8_KMI0           (IRQ_PBA8_GIC_START + 20)       /* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1           (IRQ_PBA8_GIC_START + 21)       /* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD        (IRQ_PBA8_GIC_START + 22)       /* Character LCD */
-#define IRQ_PBA8_CLCD           (IRQ_PBA8_GIC_START + 23)       /* CLCD controller */
-#define IRQ_PBA8_DMAC           (IRQ_PBA8_GIC_START + 24)       /* DMA controller */
-#define IRQ_PBA8_PWRFAIL        (IRQ_PBA8_GIC_START + 25)       /* Power failure */
-#define IRQ_PBA8_PISMO          (IRQ_PBA8_GIC_START + 26)       /* PISMO interface */
-#define IRQ_PBA8_DoC            (IRQ_PBA8_GIC_START + 27)       /* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH            (IRQ_PBA8_GIC_START + 28)       /* Ethernet controller */
-#define IRQ_PBA8_USB            (IRQ_PBA8_GIC_START + 29)       /* USB controller */
-#define IRQ_PBA8_TSPEN          (IRQ_PBA8_GIC_START + 30)       /* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD         (IRQ_PBA8_GIC_START + 31)       /* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0           (IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1           (IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2           (IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3           (IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC            -1
-#define IRQ_PBA8_SCTL           -1
-
-#define NR_GIC_PBA8             1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8            (IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS                 NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR              NR_GIC_PBA8
-#endif
-
-#endif  /* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif  /* __ASM_ARCH_BOARD_PBA8_H */