ARM: OMAP: igep0020: Specify the VPLL2 regulator unconditionally

The supply is connected to the DSS DO-D5 pins and is thus needed for
both serial and parallel display interfaces on the igep0030 as well as
the igep0020.

If the igep0030 module isn't connected to a display, no DSI or DPI
display will be specified in board code, and the DSS driver won't enable
to VPLL2 regulator anyway.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 5 insertions, 5 deletions

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 930c0d380435..8f67861405bc 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -540,7 +540,10 @@ static void __init igep_i2c_init(void)
 {
         int ret;
 
-        omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+        omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
+                              TWL_COMMON_REGULATOR_VPLL2);
+        igep_twldata.vpll2->constraints.apply_uV = true;
+        igep_twldata.vpll2->constraints.name = "VDVI";
 
         if (machine_is_igep0020()) {
                 /*
@@ -554,10 +557,7 @@ static void __init igep_i2c_init(void)
 
                 igep_twldata.keypad     = &igep2_keypad_pdata;
                 /* Get common pmic data */
-                omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
-                                      TWL_COMMON_REGULATOR_VPLL2);
-                igep_twldata.vpll2->constraints.apply_uV = true;
-                igep_twldata.vpll2->constraints.name = "VDVI";
+                omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
         }
 
         omap3_pmic_init("twl4030", &igep_twldata);