Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: SoC fixes" from Olof Johansson:
 * at91, ux500, imx, omap and bcmring:
  - at91 fixes for =m driver build issues, irqdomain fixes and config
    dependency fixes
  - ux500 kconfig dependency fixes and a  smp wakeup bugfix
  - imx idle bugfix and build fix due to irq domain changes
  - omap uart pinmux fixes, softreset regression revert and misc fixes
  - bcmring build error regression fix

 * ux500 and imx had some small defconfig updates in this branch

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: bcmring: fix UART declarations
  ARM: imx: Fix imx5 idle logic bug
  ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()
  ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: OMAP1: DMTIMER: fix broken timer clock source selection
  ARM: OMAP: serial: Fix the ocp smart idlemode handling bug
  ARM: OMAP2+: UART: Fix incorrect population of default uart pads
  ARM: OMAP: sram: fix BUG in dpll code for !PM case
  dmaengine: Kconfig: fix Atmel at_hdmac entry
  USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt
  USB: ohci-at91: change annotations for probe/remove functions
  leds-atmel-pwm.c: Make pwmled_probe() __devinit
  ARM: at91: fix at91sam9261ek Ethernet dm9000 irq
  ARM: at91: fix rm9200ek flash size
  ARM: at91: remove empty at91_init_serial function
  ARM: at91: fix typo in at91_pmc_base assembly declaration
  ARM: at91: Export at91_matrix_base
  ARM: at91: Export at91_pmc_base
  ARM: at91: Export at91_ramc_base
  ARM: at91: Export at91_st_base
  ...

6 files changed, 31 insertions, 122 deletions

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2c27fdb61e66..7144ae651d3d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
                 goto dis_opt_clks;
         _write_sysconfig(v, oh);
 
+        if (oh->class->sysc->srst_udelay)
+                udelay(oh->class->sysc->srst_udelay);
+
         if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
                 omap_test_timeout((omap_hwmod_read(oh,
                                                     oh->class->sysc->syss_offs)
@@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
  */
 int omap_hwmod_softreset(struct omap_hwmod *oh)
 {
-        if (!oh)
+        u32 v;
+        int ret;
+
+        if (!oh || !(oh->_sysc_cache))
                 return -EINVAL;
 
-        return _ocp_softreset(oh);
+        v = oh->_sysc_cache;
+        ret = _set_softreset(oh, &v);
+        if (ret)
+                goto error;
+        _write_sysconfig(v, oh);
+
+error:
+        return ret;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a5409ce3f323..a6bde34e443a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
                         .flags  = OMAP_FIREWALL_L4,
                 }
         },
-        .flags          = OCPIF_SWSUP_IDLE,
         .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c4f56cb60d7d..04a3885f4475 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
         .slave          = &omap2430_dss_venc_hwmod,
         .clk            = "dss_ick",
         .addr           = omap2_dss_venc_addrs,
-        .flags          = OCPIF_SWSUP_IDLE,
         .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 34b9766d1d23..db86ce90c69f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
                         .flags  = OMAP_FIREWALL_L4,
                 }
         },
-        .flags          = OCPIF_SWSUP_IDLE,
         .user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index cc9bd106a854..6abc75753e42 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
 static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
         .rev_offs       = 0x0000,
         .sysc_offs      = 0x0010,
+        /*
+         * ISS needs 100 OCP clk cycles delay after a softreset before
+         * accessing sysconfig again.
+         * The lowest frequency at the moment for L3 bus is 100 MHz, so
+         * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+         *
+         * TODO: Indicate errata when available.
+         */
+        .srst_udelay    = 2,
         .sysc_flags     = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
                            SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
         .idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cdd359a128e..9fc2f44188cb 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
 static void omap_uart_set_smartidle(struct platform_device *pdev)
 {
         struct omap_device *od = to_omap_device(pdev);
+        u8 idlemode;
 
-        omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
+        if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+                idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+        else
+                idlemode = HWMOD_IDLEMODE_SMART;
+
+        omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
 }
 
 #else
@@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
-        {
-                .name   = "uart1_cts.uart1_cts",
-                .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart1_rts.uart1_rts",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart1_tx.uart1_tx",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart1_rx.uart1_rx",
-                .flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-                .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-                .idle   = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-        },
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
-        {
-                .name   = "uart2_cts.uart2_cts",
-                .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart2_rts.uart2_rts",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart2_tx.uart2_tx",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart2_rx.uart2_rx",
-                .flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-                .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-                .idle   = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-        },
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
-        {
-                .name   = "uart3_cts_rctx.uart3_cts_rctx",
-                .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart3_rts_sd.uart3_rts_sd",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart3_tx_irtx.uart3_tx_irtx",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart3_rx_irrx.uart3_rx_irrx",
-                .flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-                .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-                .idle   = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-        },
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
-        {
-                .name   = "gpmc_wait2.uart4_tx",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "gpmc_wait3.uart4_rx",
-                .flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-                .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-                .idle   = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-        },
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
-        {
-                .name   = "uart4_tx.uart4_tx",
-                .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-        },
-        {
-                .name   = "uart4_rx.uart4_rx",
-                .flags  = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-                .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-                .idle   = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-        },
-};
-
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 {
-        switch (bdata->id) {
-        case 0:
-                bdata->pads = default_uart1_pads;
-                bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
-                break;
-        case 1:
-                bdata->pads = default_uart2_pads;
-                bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
-                break;
-        case 2:
-                bdata->pads = default_uart3_pads;
-                bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
-                break;
-        case 3:
-                if (cpu_is_omap44xx()) {
-                        bdata->pads = default_omap4_uart4_pads;
-                        bdata->pads_cnt =
-                                ARRAY_SIZE(default_omap4_uart4_pads);
-                } else if (cpu_is_omap3630()) {
-                        bdata->pads = default_omap36xx_uart4_pads;
-                        bdata->pads_cnt =
-                                ARRAY_SIZE(default_omap36xx_uart4_pads);
-                }
-                break;
-        default:
-                break;
-        }
 }
 #else
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}