Merge 3.8-rc5 into driver-core-next

This resolves a gpio driver merge issue pointed out in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8 files changed, 26 insertions, 16 deletions

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9cee2c2e..769c1feee1c4 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
                   OMAP_PULL_ENA),
         OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
 
+        /* UART2 - BT/FM/GPS shared transport */
+        OMAP4_MUX(UART2_CTS,    OMAP_PIN_INPUT  | OMAP_MUX_MODE0),
+        OMAP4_MUX(UART2_RTS,    OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+        OMAP4_MUX(UART2_RX,     OMAP_PIN_INPUT  | OMAP_MUX_MODE0),
+        OMAP4_MUX(UART2_TX,     OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+
         { .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
index 7e5febe456d9..ab7e952d2070 100644
--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ b/arch/arm/mach-omap2/cclock2420_data.c
@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
                         omap2_init_clk_hw_omap_clocks(c->lk.clk);
         }
 
+        omap2xxx_clkt_vps_late_init();
+
         omap2_clk_disable_autoidle_all();
 
         omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
index eda079b96c6a..eb3dab68d536 100644
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ b/arch/arm/mach-omap2/cclock2430_data.c
@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
                         omap2_init_clk_hw_omap_clocks(c->lk.clk);
         }
 
+        omap2xxx_clkt_vps_late_init();
+
         omap2_clk_disable_autoidle_all();
 
         omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 5789a5e25563..a2cc046b47f4 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
          * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
          * state when turning the ABE clock domain. Workaround this by
          * locking the ABE DPLL on boot.
+         * Lock the ABE DPLL in any case to avoid issues with audio.
          */
-        if (cpu_is_omap446x()) {
-                rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-                if (!rc)
-                        rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-                if (rc)
-                        pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-        }
+        rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+        if (!rc)
+                rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+        if (rc)
+                pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5e304d0719a2..626f3ea3142f 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
         return cnt;
 }
 
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
         struct omap_hwmod       *oh;
         struct platform_device  *pdev;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 4c7566c7e24a..2a2cfa88ddbf 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
@@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
                         oh->name);
         }
 
-        platform_data.omaprev = GET_OMAP_REVISION();
+        platform_data.omaprev = GET_OMAP_TYPE;
 
         return platform_device_register(&omap_drm_device);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 129d5081ed15..793f54ac7d14 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
          * currently reset very early during boot, before I2C is
          * available, so it doesn't seem that we have any choice in
          * the kernel other than to avoid resetting it.
+         *
+         * Also, McPDM needs to be configured to NO_IDLE mode when it
+         * is in used otherwise vital clocks will be gated which
+         * results 'slow motion' audio playback.
          */
-        .flags          = HWMOD_EXT_OPT_MAIN_CLK,
+        .flags          = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
         .mpu_irqs       = omap44xx_mcpdm_irqs,
         .sdma_reqs      = omap44xx_mcpdm_sdma_reqs,
         .main_clk       = "mcpdm_fck",
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 691aa674665a..b8ad6e632bb8 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
         struct device_node *np;
 
         for_each_matching_node(np, match) {
-                if (!of_device_is_available(np)) {
-                        of_node_put(np);
+                if (!of_device_is_available(np))
                         continue;
-                }
 
-                if (property && !of_get_property(np, property, NULL)) {
-                        of_node_put(np);
+                if (property && !of_get_property(np, property, NULL))
                         continue;
-                }
 
                 of_add_property(np, &device_disabled);
                 return np;