Merge branch 'perfcounters/urgent' into perfcounters/core

Merge reason: We are going to modify a place modified by
              perfcounters/urgent.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 109 insertions, 34 deletions

diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index f41f8d96ddba..82aa4a3d160c 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -36,7 +36,7 @@
 
         .text
 
-/* r4 parameters */
+/* r1 parameters */
 #define SDRC_NO_UNLOCK_DLL              0x0
 #define SDRC_UNLOCK_DLL                 0x1
 
@@ -58,7 +58,6 @@
 
 /* SDRC_POWER bit settings */
 #define SRFRONIDLEREQ_MASK              0x40
-#define PWDENA_MASK                     0x4
 
 /* CM_IDLEST1_CORE bit settings */
 #define ST_SDRC_MASK                    0x2
@@ -71,41 +70,72 @@
 
 /*
  * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- * r0 = new SDRC_RFR_CTRL register contents
- * r1 = new SDRC_ACTIM_CTRLA register contents
- * r2 = new SDRC_ACTIM_CTRLB register contents
- * r3 = new M2 divider setting (only 1 and 2 supported right now)
- * r4 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
+ *
+ * Params passed in registers:
+ *  r0 = new M2 divider setting (only 1 and 2 supported right now)
+ *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
  *      SDRC rates < 83MHz
- * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ *  r2 = number of MPU cycles to wait for SDRC to stabilize after
  *      reprogramming the SDRC when switching to a slower MPU speed
- * r6 = new SDRC_MR_0 register value
- * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
+ * Params passed via the stack. The needed params will be copied in SRAM
+ *  before use by the code in SRAM (SDRAM is not accessible during SDRC
+ *  reconfiguration):
+ *  new SDRC_RFR_CTRL_0 register contents
+ *  new SDRC_ACTIM_CTRL_A_0 register contents
+ *  new SDRC_ACTIM_CTRL_B_0 register contents
+ *  new SDRC_MR_0 register value
+ *  new SDRC_RFR_CTRL_1 register contents
+ *  new SDRC_ACTIM_CTRL_A_1 register contents
+ *  new SDRC_ACTIM_CTRL_B_1 register contents
+ *  new SDRC_MR_1 register value
  *
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters
+ *  are not programmed into the SDRC CS1 registers
  */
 ENTRY(omap3_sram_configure_core_dpll)
         stmfd   sp!, {r1-r12, lr}       @ store regs to stack
-        ldr     r4, [sp, #52]           @ pull extra args off the stack
-        ldr     r5, [sp, #56]           @ load extra args from the stack
-        ldr     r6, [sp, #60]           @ load extra args from the stack
-        ldr     r7, [sp, #64]           @ load extra args from the stack
+
+                                        @ pull the extra args off the stack
+                                        @  and store them in SRAM
+        ldr     r4, [sp, #52]
+        str     r4, omap_sdrc_rfr_ctrl_0_val
+        ldr     r4, [sp, #56]
+        str     r4, omap_sdrc_actim_ctrl_a_0_val
+        ldr     r4, [sp, #60]
+        str     r4, omap_sdrc_actim_ctrl_b_0_val
+        ldr     r4, [sp, #64]
+        str     r4, omap_sdrc_mr_0_val
+        ldr     r4, [sp, #68]
+        str     r4, omap_sdrc_rfr_ctrl_1_val
+        cmp     r4, #0                  @ if SDRC_RFR_CTRL_1 is 0,
+        beq     skip_cs1_params         @  do not use cs1 params
+        ldr     r4, [sp, #72]
+        str     r4, omap_sdrc_actim_ctrl_a_1_val
+        ldr     r4, [sp, #76]
+        str     r4, omap_sdrc_actim_ctrl_b_1_val
+        ldr     r4, [sp, #80]
+        str     r4, omap_sdrc_mr_1_val
+skip_cs1_params:
         dsb                             @ flush buffered writes to interconnect
-        cmp     r7, #1                  @ if increasing SDRC clk rate,
+
+        cmp     r3, #1                  @ if increasing SDRC clk rate,
         bleq    configure_sdrc          @ program the SDRC regs early (for RFR)
-        cmp     r4, #SDRC_UNLOCK_DLL    @ set the intended DLL state
+        cmp     r1, #SDRC_UNLOCK_DLL    @ set the intended DLL state
         bleq    unlock_dll
         blne    lock_dll
         bl      sdram_in_selfrefresh    @ put SDRAM in self refresh, idle SDRC
         bl      configure_core_dpll     @ change the DPLL3 M2 divider
+        mov     r12, r2
+        bl      wait_clk_stable         @ wait for SDRC to stabilize
         bl      enable_sdrc             @ take SDRC out of idle
-        cmp     r4, #SDRC_UNLOCK_DLL    @ wait for DLL status to change
+        cmp     r1, #SDRC_UNLOCK_DLL    @ wait for DLL status to change
         bleq    wait_dll_unlock
         blne    wait_dll_lock
-        cmp     r7, #1                  @ if increasing SDRC clk rate,
+        cmp     r3, #1                  @ if increasing SDRC clk rate,
         beq     return_to_sdram         @ return to SDRAM code, otherwise,
         bl      configure_sdrc          @ reprogram SDRC regs now
-        mov     r12, r5
-        bl      wait_clk_stable         @ wait for SDRC to stabilize
 return_to_sdram:
         isb                             @ prevent speculative exec past here
         mov     r0, #0                  @ return value
@@ -113,7 +143,7 @@ return_to_sdram:
 unlock_dll:
         ldr     r11, omap3_sdrc_dlla_ctrl
         ldr     r12, [r11]
-        and     r12, r12, #FIXEDDELAY_MASK
+        bic     r12, r12, #FIXEDDELAY_MASK
         orr     r12, r12, #FIXEDDELAY_DEFAULT
         orr     r12, r12, #DLLIDLE_MASK
         str     r12, [r11]              @ (no OCP barrier needed)
@@ -129,7 +159,6 @@ sdram_in_selfrefresh:
         ldr     r12, [r11]              @ read the contents of SDRC_POWER
         mov     r9, r12                 @ keep a copy of SDRC_POWER bits
         orr     r12, r12, #SRFRONIDLEREQ_MASK   @ enable self refresh on idle
-        bic     r12, r12, #PWDENA_MASK  @ clear PWDENA
         str     r12, [r11]              @ write back to SDRC_POWER register
         ldr     r12, [r11]              @ posted-write barrier for SDRC
 idle_sdrc:
@@ -149,7 +178,7 @@ configure_core_dpll:
         ldr     r12, [r11]
         ldr     r10, core_m2_mask_val   @ modify m2 for core dpll
         and     r12, r12, r10
-        orr     r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
+        orr     r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
         str     r12, [r11]
         ldr     r12, [r11]              @ posted-write barrier for CM
         bx      lr
@@ -187,15 +216,34 @@ wait_dll_unlock:
         bne     wait_dll_unlock
         bx      lr
 configure_sdrc:
-        ldr     r11, omap3_sdrc_rfr_ctrl
-        str     r0, [r11]
-        ldr     r11, omap3_sdrc_actim_ctrla
-        str     r1, [r11]
-        ldr     r11, omap3_sdrc_actim_ctrlb
-        str     r2, [r11]
+        ldr     r12, omap_sdrc_rfr_ctrl_0_val   @ fetch value from SRAM
+        ldr     r11, omap3_sdrc_rfr_ctrl_0      @ fetch addr from SRAM
+        str     r12, [r11]                      @ store
+        ldr     r12, omap_sdrc_actim_ctrl_a_0_val
+        ldr     r11, omap3_sdrc_actim_ctrl_a_0
+        str     r12, [r11]
+        ldr     r12, omap_sdrc_actim_ctrl_b_0_val
+        ldr     r11, omap3_sdrc_actim_ctrl_b_0
+        str     r12, [r11]
+        ldr     r12, omap_sdrc_mr_0_val
         ldr     r11, omap3_sdrc_mr_0
-        str     r6, [r11]
-        ldr     r6, [r11]               @ posted-write barrier for SDRC
+        str     r12, [r11]
+        ldr     r12, omap_sdrc_rfr_ctrl_1_val
+        cmp     r12, #0                 @ if SDRC_RFR_CTRL_1 is 0,
+        beq     skip_cs1_prog           @  do not program cs1 params
+        ldr     r11, omap3_sdrc_rfr_ctrl_1
+        str     r12, [r11]
+        ldr     r12, omap_sdrc_actim_ctrl_a_1_val
+        ldr     r11, omap3_sdrc_actim_ctrl_a_1
+        str     r12, [r11]
+        ldr     r12, omap_sdrc_actim_ctrl_b_1_val
+        ldr     r11, omap3_sdrc_actim_ctrl_b_1
+        str     r12, [r11]
+        ldr     r12, omap_sdrc_mr_1_val
+        ldr     r11, omap3_sdrc_mr_1
+        str     r12, [r11]
+skip_cs1_prog:
+        ldr     r12, [r11]              @ posted-write barrier for SDRC
         bx      lr
 
 omap3_sdrc_power:
@@ -206,14 +254,40 @@ omap3_cm_idlest1_core:
         .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
 omap3_cm_iclken1_core:
         .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+
+omap3_sdrc_rfr_ctrl_0:
         .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+        .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrl_a_0:
         .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrl_a_1:
+        .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrl_b_0:
         .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrl_b_1:
+        .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
 omap3_sdrc_mr_0:
         .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+        .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
+omap_sdrc_rfr_ctrl_0_val:
+        .word 0xDEADBEEF
+omap_sdrc_rfr_ctrl_1_val:
+        .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_0_val:
+        .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_1_val:
+        .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_0_val:
+        .word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_1_val:
+        .word 0xDEADBEEF
+omap_sdrc_mr_0_val:
+        .word 0xDEADBEEF
+omap_sdrc_mr_1_val:
+        .word 0xDEADBEEF
+
 omap3_sdrc_dlla_status:
         .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 omap3_sdrc_dlla_ctrl:
@@ -223,3 +297,4 @@ core_m2_mask_val:
 
 ENTRY(omap3_sram_configure_core_dpll_sz)
         .word   . - omap3_sram_configure_core_dpll
+