OMAP2/3 board-*.c files: read bootloader configuration earlier

Most board-*.c files read configuration data from the bootloader in
their .init_machine() function.  This needs to happen earlier, at some
point before omap2_init_common_hw() is called.  This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 10 insertions, 10 deletions

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 8236708c3627..b43f6e36b6d9 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -305,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
         return 0;
 }
 
-static void __init omap3pandora_init_irq(void)
-{
-        omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-                             mt46h32m32lf6_sdrc_params);
-        omap_init_irq();
-        omap_gpio_init();
-}
-
 static void __init omap3pandora_ads7846_init(void)
 {
         int gpio = OMAP3_PANDORA_TS_GPIO;
@@ -375,6 +367,16 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
         { OMAP_TAG_LCD,         &omap3pandora_lcd_config },
 };
 
+static void __init omap3pandora_init_irq(void)
+{
+        omap_board_config = omap3pandora_config;
+        omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
+        omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+                             mt46h32m32lf6_sdrc_params);
+        omap_init_irq();
+        omap_gpio_init();
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
         &omap3pandora_lcd_device,
         &pandora_leds_gpio,
@@ -386,8 +388,6 @@ static void __init omap3pandora_init(void)
         omap3pandora_i2c_init();
         platform_add_devices(omap3pandora_devices,
                         ARRAY_SIZE(omap3pandora_devices));
-        omap_board_config = omap3pandora_config;
-        omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
         omap_serial_init();
         spi_register_board_info(omap3pandora_spi_board_info,
                         ARRAY_SIZE(omap3pandora_spi_board_info));