ARM: OMAP: switch to gpio_direction_output

More conversion to the standard GPIO interfaces:  stop using
omap_set_gpio_direction() entirely, and switch over to the
gpio_direction_output() call.

Note that because gpio_direction_output() includes the initial
value, this change isn't quite transparent.

 - For the call sites which defined an initial value either
   before or after setting the direction, that value was used.

   When that value was previously assigned afterwards, this
   could eliminate a brief output glitch ... and possibly
   change behavior.  In a few cases (LCDs) several values
   were assigned together ... those were re-arranged to match
   the explicit sequence provided.

 - Some call sites didn't define such a value; so I chose an
   initial "off/reset" value that seemed to default to "off".

In short, files touched by this patch might notice some small
changes in startup behavior (with trivial fixes).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

5 files changed, 10 insertions, 19 deletions

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index a2914ac4a202..7329ad549a98 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -439,7 +439,7 @@ static void __init h2_init(void)
 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
         omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
         if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
-                omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
+                gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0);
                 h2_irda_data.transceiver_mode = h2_transceiver_mode;
         }
 #endif
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 5a232adaefcc..dec20104eb58 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -323,8 +323,7 @@ palmz71_gpio_setup(int early)
 {
         if (early) {
                 /* Only set GPIO1 so we have a working serial */
-                gpio_set_value(1, 1);
-                omap_set_gpio_direction(1, 0);
+                gpio_direction_output(1, 1);
         } else {
                 /* Set MMC/SD host WP pin as input */
                 if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) {
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 22305270381d..93bd395b9972 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -436,14 +436,9 @@ static void __init omap_sx1_init(void)
         omap_request_gpio(1);   /* A_IRDA_OFF */
         omap_request_gpio(11);  /* A_SWITCH */
         omap_request_gpio(15);  /* A_USB_ON */
-        omap_set_gpio_direction(1, 0);/* gpio1 -> output */
-        omap_set_gpio_direction(11, 0);/* gpio11 -> output */
-        omap_set_gpio_direction(15, 0);/* gpio15 -> output */
-        /* set GPIO data */
-        gpio_set_value(1, 1);/*A_IRDA_OFF = 1 */
-        gpio_set_value(11, 0);/*A_SWITCH = 0 */
-        gpio_set_value(15, 0);/*A_USB_ON = 0 */
-
+        gpio_direction_output(1, 1);    /*A_IRDA_OFF = 1 */
+        gpio_direction_output(11, 0);   /*A_SWITCH = 0 */
+        gpio_direction_output(15, 0);   /*A_USB_ON = 0 */
 }
 /*----------------------------------------*/
 static void __init omap_sx1_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 86e73b7bffa9..43b008f639f5 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -171,8 +171,7 @@ static void __init voiceblue_init(void)
         omap_request_gpio(0);
         /* smc91x reset */
         omap_request_gpio(7);
-        omap_set_gpio_direction(7, 0);
-        gpio_set_value(7, 1);
+        gpio_direction_output(7, 1);
         udelay(2);      /* wait at least 100ns */
         gpio_set_value(7, 0);
         mdelay(50);     /* 50ms until PHY ready */
@@ -180,8 +179,7 @@ static void __init voiceblue_init(void)
         omap_request_gpio(8);
         /* 16C554 reset*/
         omap_request_gpio(6);
-        omap_set_gpio_direction(6, 0);
-        gpio_set_value(6, 0);
+        gpio_direction_output(6, 0);
         /* 16C554 interrupt pins */
         omap_request_gpio(12);
         omap_request_gpio(13);
@@ -244,8 +242,7 @@ static int wdt_gpio_state;
 
 void voiceblue_wdt_enable(void)
 {
-        omap_set_gpio_direction(0, 0);
-        gpio_set_value(0, 0);
+        gpio_direction_output(0, 0);
         gpio_set_value(0, 1);
         gpio_set_value(0, 0);
         wdt_gpio_state = 0;
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 6cdad93c4a00..540434e38f22 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -48,13 +48,13 @@ omap_leds_init(void)
                  */
                 omap_cfg_reg(P18_1610_GPIO3);
                 if (omap_request_gpio(3) == 0)
-                        omap_set_gpio_direction(3, 0);
+                        gpio_direction_output(3, 1);
                 else
                         printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
 
                 omap_cfg_reg(MPUIO4);
                 if (omap_request_gpio(OMAP_MPUIO(4)) == 0)
-                        omap_set_gpio_direction(OMAP_MPUIO(4), 0);
+                        gpio_direction_output(OMAP_MPUIO(4), 1);
                 else
                         printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
         }